GitLab

* changes:
  intel: Add function to check fpga readiness
  intel: Add bridge control for FPGA reconfig
  intel: FPGA config_isdone() status query
  intel: System Manager refactoring
  intel: Refactor reset manager driver
  intel: Enable bridge access in Intel platform
  intel: Modify non secure access function

This reverts commit d433bbdd.

Change-Id: I46c69dce704a1ce1b50452dd4d62425c4a67f7f0

Setting errata workarounds for N1 1043202 and 1315703 to 0 since
they should be turned off by default.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I116673a4ddcf64436e90d70133f035a133989ed9

Out of two possible implementation of Secure Partition Manager(SPM)
currently only Management mode (MM) design is supported and the support
for SPM based on SPCI Alpha 1 prototype has been removed.

Earlier both implementation used common build flag "ENABLE_SPM" but it
has since been decoupled and MM uses a separate build FLAG "SPM_MM".

Instructions to build it for FVP was still using "ENABLE_SPM", which has
beend corrected in this patch.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I505b98173d6051816436aa602ced6dbec4efc776

Parse the parameter structure the PLM populates, to populate the
bl32 and bl33 image structures.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I317072d1086f6cc6f90883c1b8b6d086ff57b443

ATF handover can be used by Xilinx platforms, so move it to common
file from platform specific files.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>
Change-Id: I5f0839351f534619de581d1953c8427a079487e0

This reverts commit 76d84cbc.

Change-Id: I867af7af3d9f5e568101f79b9ebea578e5cb2a4b

* changes:
  plat: xilinx: Move pm_client.h to common directory
  plat: xilinx: versal: Make silicon default build target
  xilinx: versal: Wire silicon default setup
  versal: Increase OCM memory size for DEBUG builds
  plat: xilinx: versal: Dont set IOU switch clock
  arm64: versal: Adjust cpu clock for versal virtual
  xilinx: versal: Add support for PM_GET_OPERATING_CHARACTERISTIC EEMI call
  plat: versal: Add Get_ChipID API
  plat: xilinx: versal: Add load Pdi API support
  xilinx: versal: Add feature check API
  xilinx: versal: Implement set wakeup source for client
  plat: xilinx: versal: Add GET_CALLBACK_DATA function
  xilinx: versal: Add PSCI APIs for system shutdown & reset
  xilinx: versal: Add PSCI APIs for suspend/resume
  xilinx: versal: Remove no_pmc ops to ON power domain
  xilinx: versal: Add set wakeup source API
  xilinx: versal: Add client wakeup API
  xilinx: versal: Add query data API
  xilinx: versal: Add request wakeup API
  xilinx: versal: Add PM_INIT_FINALIZE API for versal
  xilinx: versal: Add support of PM_GET_TRUSTZONE_VERSION API
  xilinx: versal: enable ipi mailbox service
  xilinx: move ipi mailbox svc to xilinx common
  plat: xilinx: versal: Implement PM IOCTL API
  xilinx: versal: Implement power down/restart related EEMI API
  xilinx: versal: Add SMC handler for EEMI API
  xilinx: versal: Implement PLL related PM APIs
  xilinx: versal: Implement clock related PM APIs
  xilinx: versal: Implement pin control related PM APIs
  xilinx: versal: Implement reset related PM APIs
  xilinx: versal: Implement device related PM APIs
  xilinx: versal: Add support for suspend related APIs
  xilinx: versal: Add get_api_version support
  xilinx: Add support to send PM API to PMC using IPI for versal
  plat: xilinx: versal: Move versal_def.h to include directory
  plat: xilinx: versal: Move versal_private.h to include directory
  plat: xilinx: zynqmp: Use GIC framework for warm restart

Moving the FDT helper functions to the common/ directory exposed the file
to MISRA checking, which is mandatory for common code.

Fix the complaints that the test suite reported.

Change-Id: Ica8c8a95218bba5a3fd92a55407de24df58e8476
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

In order to support SEPARATE_NOBITS_REGION for Arm platforms, we need to load
BL31 PROGBITS into secure DRAM space and BL31 NOBITS into SRAM. Hence mandate
the build to require that ARM_BL31_IN_DRAM is enabled as well.

Naturally with SEPARATE_NOBITS_REGION enabled, the BL31 initialization code
cannot be reclaimed to be used for runtime data such as secondary cpu stacks.

Memory map for BL31 NOBITS region also has to be created.

Change-Id: Ibd480f82c1dc74e9cbb54eec07d7a8fecbf25433
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Since BL31 PROGBITS and BL31 NOBITS sections are going to be
in non-adjacent memory regions, potentially far from each other,
some fixes are needed to support it completely.

1. adr instruction only allows computing the effective address
of a location only within 1MB range of the PC. However, adrp
instruction together with an add permits position independent
address of any location with 4GB range of PC.

2. Since BL31 _RW_END_ marks the end of BL31 image, care must be
taken that it is aligned to page size since we map this memory
region in BL31 using xlat_v2 lib utils which mandate alignment of
image size to page granularity.

Change-Id: Ic745c5a130fe4239fa2742142d083b2bdc4e8b85
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

* changes:
  plat: imx: Correct the SGIs that used for secure interrupt
  plat: imx8mm: Add the support for opteed spd on imx8mq/imx8mm

* changes:
  Tegra194: platform handler for entering CPU standby state
  Tegra194: memctrl: force viw and vifalr/w transactions as non-coherent
  Tegra194: memctrl: fix bug in client order id reg value generation
  Tegra194: memctrl: enable mc coalescer
  Tegra194: update scratch registers used to read boot parameters
  Tegra194: implement system shutdown/reset handlers
  Tegra194: mce: support for shutdown and reboot
  Tegra194: request CG7 before checking if SC7 is allowed
  Tegra194: config to enable/disable strict checking mode
  Tegra194: remove unused platform configs
  Tegra194: restore XUSB stream IDs on System Resume

Remove the general BL31 mmap region: it duplicates the existing static
mapping for the entire SRAM region. Use the helper definitions when
applicable to simplify the code and add the MT_EXECUTE_NEVER flag.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I7a6b79e50e4b5c698774229530dd3d2a89e94a6d

* changes:
  doc: stm32mp1: Update build command line
  fdts: stm32mp1: remove second QSPI flash instance
  stm32mp1: Add support for SPI-NOR boot device
  stm32mp1: Add support for SPI-NAND boot device
  spi: stm32_qspi: Add QSPI support
  fdts: stm32mp1: update for FMC2 pin muxing
  stm32mp1: Add support for raw NAND boot device
  fmc: stm32_fmc2_nand: Add FMC2 driver support
  stm32mp1: Reduce MAX_XLAT_TABLES to 4
  io: stm32image: fix device_size type
  stm32mp: add DT helper for reg by name
  stm32mp1: add compilation flags for boot devices
  lib: utils_def: add CLAMP macro
  compiler_rt: Import popcountdi2.c and popcountsi2.c files
  Add SPI-NOR framework
  Add SPI-NAND framework
  Add SPI-MEM framework
  Add raw NAND framework

Add new flags for storage support that must be used in the build
command line. Add the complete build steps for an OP-TEE configuration.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I0c682f6eb0aab83aa929f4ba734d3151c264aeed

Remove second flash node as only one must be used
by QSPI NOR driver.

Change-Id: I48189f2fdf4e0455aabe7d4cd9b2f3d36bb9cfb5
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

STM32MP1 platform is able to boot from SPI-NOR devices.
These modifications add this support using the new
SPI-NOR framework.

Change-Id: I75ff9eba4661f9fb87ce24ced2bacbf8558ebe44
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

STM32MP1 platform is able to boot from SPI-NAND devices.
These modifications add this support using the new
SPI-NAND framework.

Change-Id: I0d5448bdc4bde153c1209e8043846c0f935ae5ba
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

Add QSPI support (limited to read interface).
Implements the memory map and indirect modes.
Low level driver based on SPI-MEM operations.

Change-Id: Ied698e6de3c17d977f8b497c81f2e4a0a27c0961
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>

Include the required FMC2 pinmux definition for the
NAND management.

Change-Id: I80333deacdf3444b2f21f17f2fb5919e569a3591
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

STM32MP1 platform is able to boot from raw NAND devices.
These modifications add this support using the new
raw NAND framework.

Change-Id: I9e9c2b03930f98a5ac23f2b6b41945bef43e5043
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>

Add fmc2_nand driver support. The driver implements
only read interface for NAND devices.

Change-Id: I3cd037e8ff645ce0d217092b96f33ef41cb7a522
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>