GitLab

* changes:
  imx8: Replace PLAT_IMX8* with automatic PLAT_imx8*
  plat: imx8mq: Implement IMX_SIP_GET_SOC_INFO

Update M3 Ver.3.0 QoS setting rev.0.03.

Change-Id: I892521d456c606ac3d30f2b2ac6b4e16faa5fc48
Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Previously the readme.rst file served as the entrypoint for the
documentation. With a Sphinx build the top-level document is set
to be index.rst as it contains the primary document index.

This patch moves some content from readme.rst into index.rst and
splits the license information out into license.rst.

Change-Id: I5c50250b81136fe36aa9ceedaae302b44ec11e47
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

This change creates the following directories under docs/
in order to provide a grouping for the content:

- components
- design
- getting_started
- perf
- process

In each of these directories an index.rst file is created
and this serves as an index / landing page for each of the
groups when the pages are compiled. Proper layout of the
top-level table of contents relies on this directory/index
structure.

Without this patch it is possible to build the documents
correctly with Sphinx but the output looks messy because
there is no overall hierarchy.

Change-Id: I3c9f4443ec98571a56a6edf775f2c8d74d7f429f
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Add the essentials for supporting a Sphinx documentation build:

- A makefile under docs/ to invoke Sphinx with the desired output
  format
- A Sphinx master configuration file (conf.py)
- A single, top-level index page (index.rst)
- The TF.org logo that is integrated in the the sidebar of the
  rendered output

Change-Id: I85e67e939658638337ca7972936a354878083a25
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Change-Id: I5c06e777d93ac653a853997c2b7c1c9d09b1e49c
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

The intention of this patch is to leverage the existing el3_exit() return
routine for smc_unknown return path rather than a custom set of instructions.
In order to leverage el3_exit(), the necessary counteraction (i.e., saving the
system registers apart from GP registers) must be performed. Hence a series of
instructions which save system registers( like SPSR_EL3, SCR_EL3 etc) to stack
are moved to the top of group of instructions which essentially decode the OEN
from the smc function identifier and obtain the specific service handler in
rt_svc_descs_array. This ensures that the control flow for both known and
unknown smc calls will be similar.

Change-Id: I67f94cfcba176bf8aee1a446fb58a4e383905a87
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

* Optimization flags were only provided for debug build.
* Set optimisation level to -O1
* Remove CFLAGS which is never used for romlib
* Remove the ignored -g flag from LDFLAGS

Change-Id: Id4b69026d8a322ed4cb0acf06c350f13d31571ad
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Change-Id: I33c1bf49aa10867e1a2ca4c167112b99bf756dda
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

Platform defines are already provided by the build system so let's not
duplicate them.

Change-Id: Icf1ea76c3c3213e27b447c95e2b22b961fa7693e
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

The manual documents that 0x3036006c should contains the soc revision
for imx8mq but this always reports A0. Work around this by parsing the
ROM header and checking if OCOTP register 0x40 is stuck at 0xff0055aa.

Determining this inside TF-A makes life easier for OS, see for example
this linux discussion: https://lkml.org/lkml/2019/5/3/465



The soc revision can also be useful inside TF-A itself, for example for
the non-upstream DDR DVFS "busfreq" feature is affected by 8mq erratas.

The clock for OCOTP block can be disabled by OS so only initialize soc
revision once at boot time.

Change-Id: I9ca3f27840229ce8a28b53870e44da29f63c73aa
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

* changes:
  N1SDP: Initialise CNTFRQ in Non Secure CNTBaseN
  N1SDP: Fix DRAM2 start address
  Add option for defining platform DRAM2 base
  Disable speculative loads only if SSBS is supported

N1SDP exhibits the behavior similar to Juno wherein CNTBaseN.CNTFRQ
can be written but does not reflect the value of the CNTFRQ register
in CNTCTLBase frame. This doesn't follow ARM ARM in that the value
updated in CNTCTLBase.CNTFRQ is not reflected in CNTBaseN.CNTFRQ.

Hence enable the workaround (applied to Juno) for N1SDP that updates
the CNTFRQ register in the Non Secure CNTBaseN frame.

Change-Id: Id89ee1bca0f25c9d62f8f794f2c4f4e618cdf092
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>

The default DRAM2 start address for Arm platforms
is 0x880000000. However, for N1SDP platform this is
0x8080000000.

Fix the DRAM2 start address by initialising
PLAT_ARM_DRAM2_BASE.

Without this fix there is a mismatch of the System
memory region view as seen by the BL31 runtime
firmware (PSCI) versus the view of the OS (which
is based on the description provided by UEFI. In
this case UEFI is correctly describing the DRAM2
start address).

This implicates in secondary cores failing to start
on some Operating Systems if the OS decides to place
the secondary start address in the mismatched region.

Change-Id: I57220e753219353dda429868b4c5e1a69944cc64
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>

The default DRAM2 base address for Arm platforms
is 0x880000000. However, on some platforms the
firmware may want to move the start address to
a different value.

To support this introduce PLAT_ARM_DRAM2_BASE that
defaults to 0x880000000; but can be overridden by
a platform (e.g. in platform_def.h).

Change-Id: I0d81195e06070bc98f376444b48ada2db1666e28
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>

Examine the ID_AA64PFR1_EL1 bits 7:4 to see if speculative
loads (SSBS) is implemented, before disabling speculative
loads.

Change-Id: I7607c45ed2889260d22a94f6fd9af804520acf67
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>

We've seen issues with some THG based UFS chips, where
after reset the LUNs don't always enumerate properly.

After some debugging, we found that extending the mdelay
here seems to resolve the issue by giving the chips enough
time to complete reset.

Change-Id: I848f810b2438ed6ad3d33db614c61d2cef9ac400
Signed-off-by: John Stultz <john.stultz@linaro.org>

Remove duplicated linker symbols, resue the symbols
defined in bl_common.h

Change-Id: I10de450eccc78c09b61a8ae7126bf4f4029fa682
Signed-off-by: Jacky Bai <ping.bai@nxp.com>

This patch removes .arch "arm8.1-a" and "armv8-a"
directives which overwrite ASFLAGS_aarch64 option based
on ARM_ARCH_MINOR passed to Makefile and cause
translation errors like
"selected processor does not support `bti jc'"
for armv8.5-a targets when BTI support is enabled.

Change-Id: Idca5b66ed1e5d86e2188b0c0f16c3819990957c4
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

For security DMA should be blocked at the SMMU by default
unless explicitly enabled for a device. SMMU is disabled
after reset with all streams bypassing the SMMU, and
abortion of all incoming transactions implements a default
deny policy on reset.
This patch also moves "bl1_platform_setup()" function from
arm_bl1_setup.c to FVP platforms' fvp_bl1_setup.c and
fvp_ve_bl1_setup.c files.

Change-Id: Ie0ffedc10219b1b884eb8af625bd4b6753749b1a
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

- Add basic platform setup
- Add generic CPU helper functions
- Add delay timer platform implementation
- Use TI 16550 uart driver

Change-Id: I1c29569c68fe9fca5e10e88a22a29690bab7141f
Signed-off-by: kenny liang <kenny.liang@mediatek.com>

The IMX_SIP_BUILDINFO call was implemented for imx8qm and imx8qx but
it's also applicable to imx8m.

This fixes U-Boot not printing commit hash on 8m with upstream TF-A.

Change-Id: Idcfd9729eaaccf329c24e241da325f1f6cd3c880
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

I'm giving full maintainership of the Raspberry Pi 3 platform port to
Paul. I'm also leaving the GXBB maintainership to Andre, who is also
happy to pass it on to someone else who is more interested in it.

Change-Id: Ieb2212f5fc11ebde9fc0c857e9e305d691d4ee3f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Pointer authentication is supported only in AArch64. A relevant check is
added for that in the Makefile.

Change-Id: I021ba65a9bd5764fd33292bee42617015e04a870
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>