GitLab

This patch adds LPD WDT clock node to the pm_clock clocks structure list
so that LPD WDT can be used from Linux.

Also this patch removes the CLK_LPD_LSBUS from invalid clock list to
allow the registration of this clock to CCF framework as it is the
parent of LPD WDT.
Signed-off-by: Mounika Grace Akula <mounika.grace.akula@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: Iea065aa8150eaba4bb4b42bc6be1fd4b7fe7b403

GEM-related clock models were incorrect and are fixed as follows
(documented below for GEM0, but the same holds for any GEM ID):

- CLK_GEM0_REF_UNGATED represents clock that has DIV0/1 divisors and
 the multiplexer controllable in GEM0_REF_CTRL (CRL_APB). The ID of this
 clock is newly introduced in this patch.

- CLK_GEM0_REF models the clock mux that selects the reference clock
 for Tx, i.e. selects CLK_GEM0_REF_UNGATED or external Tx clock. This
 mux is controllable via GEM_CLK_CTRL (IOU_SLCR), bit GEM0_REF_SRC_SEL.
 Note that the routing of external clock to the mux is not modelled
 and is assumed to be configured by the FSBL if required, and not
 changeable at runtime. The ID of this clock is introduced in this patch.

- CLK_GEM0_TX models clock with only a gate that is controlled via
 bit 25 in GEM0_REF_CTRL (CRL_APB). The parent of this clock is
 CLK_GEM0_REF. The clock ID of CLK_GEM0_TX matches the previous ID
 value of CLK_GEM0_REF. This is done in order to fix the clock models
 and incorrect binding without requiring to change device-tree (binding
 of clock IDs to GEM interface).

- CLK_GEM0_RX models clock that has only gate controlled via RX_CLKACT
 bit (26) in GEM0_REF_CTRL (CRL_APB). Parent of this clock is sourced
 from external RGMII PHY (via MIO or EMIO). We do not model the whole
 clock path to the Rx gate, since this is configured by the FSBL and
 never changed at runtime (and there is no mechanism to change the
 path at runtime). The clock ID of CLK_GEM0_RX clock is equal to the
 previous ID value of CLK_GEM0_TX clock. This is done because the TX/RX
 were swapped in device tree, so by fixing the IDs this way there is no
 need for device tree fix.

Rates of the external RX/TX clocks can be specified in device tree if
needed. Right now, that's not necessary because Tx clock is sourced
from an on-chip PLL (via CLK_GEM0_REF_UNGATED/CLK_GEM0_REF), whereas
the Rx clock is sourced from external reference and the driver never
attempts to get/get clock rate (only to enable it). If this changes in
future, ATF clock model doesn't need to be changed. Instead, the clock
rates for gem0_tx_ext and gem0_rx_ext have to be specified in device
tree.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <will.wong@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I6497d4309e92205c527bd81b3aa932f4474f5b79

This patch renames FPD WDT clock ID from CLK_WDT to CLK_FPD_WDT.
Signed-off-by: Mounika Grace Akula <mounika.grace.akula@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Change-Id: I4d00a59b1dc54920115a2da55e8a06347fe2231c

In the existing model for ACPU clock the mux, divider, and gate were
represented as one clock and ACPU_HALF was modelled as child of
ACPU clock. This is not correct. ACPU clock model contains only
mux and the divider, and it has 2 children: ACPU_FULL and ACPU_HALF
clocks which have only gates. The models of ACPU and ACPU_HALF clocks
are fixed and ACPU_FULL clock is added.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Clock get parent EEMI API is reimplemented to use system-level clock
and pll EEMI APIs rather than direct MMIO read/write accesses to clock
and pll control registers.
Since linux still uses clock set parent API to get pre_src, post_src, div2
and bypasss, in the implementation of pm_clock_get_parent() we need to
workaround this by distinguishing two cases:
1) if the given clock ID corresponds to a PLL-related clock ID (*_PRE_SRC,
   *_POST_SRC, *_INT_MUX or *_PLL clock IDs); or
2) given clock ID is truly an on-chip clock.
For case 1) we'll map the call onto PLL-specific EEMI API with the
respective parameter ID. For case 2) the call is passed to the PMU.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Clock set parent EEMI API is reimplemented to use system-level clock
and pll EEMI APIs rather than direct MMIO read/write accesses to clock
and pll control registers.
Since linux still uses clock set parent API to set pre_src, post_src, div2
and bypass, in the implementation of pm_clock_set_parent() we need to
workaround this by distinguishing two cases:
1) if the given clock ID corresponds to a PLL-related clock ID (*_PRE_SRC,
*_POST_SRC, *_INT_MUX or *PLL clock IDs); or 2) given clock ID is truly
an on-chip clock.
For case 1) we'll map the call onto PLL set parameter EEMI API with the
respective parameter ID. Since clock set parent interface to EL1/2 receives
parent index (mux select value), the value is just passed to PMU.
Functions that appear to be unused after this change is made are removed.

Setting the parent of *PLL clocks, that actually model bypass, is not
possible. This is already ensured by the existing clock model having the
CLK_SET_RATE_NO_REPARENT flag. The API also doesn't allow changing the
bypass parent. Bypass is controlled only by the PMU firmware.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Clock set/get rate are not implemented and will likely never be.
Remove empty function stubs.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Clock get divider EEMI API is reimplemented to use system-level clock
get divider EEMI API rather than direct MMIO read/write accesses to clock
control registers.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Clock set divider EEMI API is reimplemented to use system-level clock
set divider EEMI API rather than direct MMIO read/write accesses to clock
control registers.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Clock get state EEMI API is reimplemented to use system-level clock
and pll EEMI APIs rather than direct MMIO read/write accesses to clock
and pll control registers.
Since linux is_enabled method for PLLs still uses clock get state API
get the PLL state, in the implementation of pm_clock_getstate() we need
to workaround this by distinguishing two cases: 1) if the given clock ID
corresponds to a PLL output clock ID; or 2) given clock ID is truly an
on-chip clock whose state of the gate should be returned.
For case 1) we'll call pm_api_clock_pll_getstate() implemented in
pm_api_clock.h/c. This function will query the PLL state from PMU using
the system-level PLL get mode EEMI API.
For case 2) we'll call the PMU to query the clock gate state using
system-level clock get status EEMI API.
Functions that appear to be unused after this change is made are removed.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Clock disable EEMI API is reimplemented to use system-level clock
and pll EEMI APIs rather than direct MMIO read/write accesses to clock
and pll control registers.
Since linux still uses clock disable API to reset the PLL in the
implementation of pm_clock_disable() we need to workaround this by
distinguishing two cases: 1) if the given clock ID corresponds to a PLL
output clock ID; or 2) given clock ID is truly an on-chip clock that can
be gated.
For case 1) we'll call pm_api_clock_pll_disable() implemented in
pm_api_clock.h/c. This function will reset the PLL using the system-level
PLL set mode EEMI API with the reset mode argument.
For case 2) we'll call the PMU to configure the clock gate. This is done
using system-level clock disable EEMI API.
Functions that appear to be unused after this change is made are removed.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Clock enable EEMI API is reimplemented to use system-level clock
and pll EEMI APIs rather than direct MMIO read/write accesses to clock
and pll control registers.
Since linux still uses clock enable API to trigger locking of the PLLs
in the pm_clock_enable() implementation we need to workaround this by
distinguishing two cases: 1) if the given clock ID corresponds to a PLL
output clock ID; or 2) given clock ID is truly an on-chip clock that can
be gated.
For case 1) we'll call pm_api_clock_pll_enable() implemented in
pm_api_clock.h/c. This function checks what is the buffered PLL mode and
calls the system-level PLL set mode EEMI API with the buffered mode value
specified as argument. Long term, if linux driver get fixed to use PLL
EEMI API to control PLLs, this case could be removed from ATF.
For case 2) we'll call the PMU to configure the clock gate. This is done
using system-level clock enable EEMI API.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

When linux calls pm_ioctl_get_pll_frac_mode() it doesn't expect the actual
mode to be read from hardware, but the value that it is intending to
program. Therefore, we return the buffered value to linux.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

When linux calls pm_ioctl_set_pll_frac_mode() it doesn't expect the
fractional mode to be changed in hardware. Furthermore, even before this
patch setting the mode which is done by writing into register takes
no effect until the PLL reset is deasserted, i.e. until linux "enables"
the PLL. To adjust the code to system-level PLL EEMI API and avoid
unnecessary IPIs that would otherwise be issued, we buffer the mode
value set via IOCTL until the PLL mode really needs to be set.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Fractional data should be set using PLL set parameter EEMI API. This
stands for system-level communication (APU to PMU). Since linux
already uses a specific IOCTL function to do this and we need to
keep it that way, the pll clock ID given by linux has to be mapped
to the pll node ID that is communicated at the system-level (argument
of PLL set parameter API).
With this modification the function pm_api_clk_set_pll_frac_data is
removed from pm_api_clock.c/h because it became unused.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Fractional data should be get using PLL get parameter EEMI API. This
stands for system-level communication (APU to PMU). Since linux
already uses a specific IOCTL function to do this and we need to
keep it that way, the pll clock ID given by linux has to be mapped
to the pll node ID that is communicated at the system-level (argument
of PLL get parameter API).
With this modification the function pm_api_clk_get_pll_frac_data is
removed from pm_api_clock.c/h because it became unused.
The clock enum is defined as 'enum clock_id'.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>
Acked-by: Will Wong <WILLW@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca339

 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

All identifiers, regardless of use, that start with two underscores are
reserved. This means they can't be used in header guards.

The style that this project is now to use the full name of the file in
capital letters followed by 'H'. For example, for a file called
"uart_example.h", the header guard is UART_EXAMPLE_H.

The exceptions are files that are imported from other projects:

- CryptoCell driver
- dt-bindings folders
- zlib headers

Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Currently in Linux maximum number of clocks is hard-coded and
so it needs to allocate static memory. It can get actual clock
number after querying all clock names by special clock name
string. Add new query data parameter to get actual number of
clocks so Linux can get actual clock numbers in advance.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>

Various changes to comply with MISRA static analysis rules
Signed-off-by: Jolly Shah <jollys@xilinx.com>

- Add clock entries and information to clock database.
- Implement APIs to provide clock topology and other
  information to caller.
- Implement APIs to control clocks and PLLs.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>

These are empty functions with no logic right now. Code
will be added in subsequent commits.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>