GitLab

This patch implements PSCI_SYSTEM_RESET2 API as defined in PSCI
v1.1 specification. The specification allows architectural and
vendor-specific resets via this API. In the current specification,
there is only one architectural reset, the warm reset. This reset is
intended to provide a fast reboot path that guarantees not to reset
system main memory.

Change-Id: I057bb81a60cd0fe56465dbb5791d8e1cca025bd3
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

This patch adds the generic code that links the psci smc handler
with the platform function that implements the mem_protect and
mem_check_range functionalities. These functions are  optional
APIs added in PSCI v1.1 (ARM DEN022D).

Change-Id: I3bac1307a5ce2c7a196ace76db8317e8d8c8bb3f
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by FreeBSD have not been modified.

[0]: https://spdx.org/



Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

The current PSCI implementation can apply certain optimizations upon the
assumption that all PSCI participants are cache-coherent.

  - Skip performing cache maintenance during power-up.

  - Skip performing cache maintenance during power-down:

    At present, on the power-down path, CPU driver disables caches and
    MMU, and performs cache maintenance in preparation for powering down
    the CPU. This means that PSCI must perform additional cache
    maintenance on the extant stack for correct functioning.

    If all participating CPUs are cache-coherent, CPU driver would
    neither disable MMU nor perform cache maintenance. The CPU being
    powered down, therefore, remain cache-coherent throughout all PSCI
    call paths. This in turn means that PSCI cache maintenance
    operations are not required during power down.

  - Choose spin locks instead of bakery locks:

    The current PSCI implementation must synchronize both cache-coherent
    and non-cache-coherent participants. Mutual exclusion primitives are
    not guaranteed to function on non-coherent memory. For this reason,
    the current PSCI implementation had to resort to bakery locks.

    If all participants are cache-coherent, the implementation can
    enable MMU and data caches early, and substitute bakery locks for
    spin locks. Spin locks make use of architectural mutual exclusion
    primitives, and are lighter and faster.

The optimizations are applied when HW_ASSISTED_COHERENCY build option is
enabled, as it's expected that all PSCI participants are cache-coherent
in those systems.

Change-Id: Iac51c3ed318ea7e2120f6b6a46fd2db2eae46ede
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

The PSCI implementation performs cache maintenance operations on its
data structures to ensure their visibility to both cache-coherent and
non-cache-coherent participants. These cache maintenance operations
can be skipped if all PSCI participants are cache-coherent. When
HW_ASSISTED_COHERENCY build option is enabled, we assume PSCI
participants are cache-coherent.

For usage abstraction, this patch introduces wrappers for PSCI cache
maintenance and barrier operations used for state coordination: they are
effectively NOPs when HW_ASSISTED_COHERENCY is enabled, but are
applied otherwise.

Also refactor local state usage and associated cache operations to make
it clearer.

Change-Id: I77f17a90cba41085b7188c1345fe5731c99fad87
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

This patch introduces the following three platform interfaces:

* void plat_psci_stat_accounting_start(const psci_power_state_t *state_info)

  This is an optional hook that platforms can implement in order
  to perform accounting before entering a low power state.  This
  typically involves capturing a timestamp.

* void plat_psci_stat_accounting_stop(const psci_power_state_t *state_info)

  This is an optional hook that platforms can implement in order
  to perform accounting after exiting from a low power state.  This
  typically involves capturing a timestamp.

* u_register_t plat_psci_stat_get_residency(unsigned int lvl,
	const psci_power_state_t *state_info,
	unsigned int last_cpu_index)

  This is an optional hook that platforms can implement in order
  to calculate the PSCI stat residency.

If any of these interfaces are overridden by the platform, it is
recommended that all of them are.

By default `ENABLE_PSCI_STAT` is disabled.  If `ENABLE_PSCI_STAT`
is set but `ENABLE_PMF` is not set then an alternative PSCI stat
collection backend must be provided.  If both are set, then default
weak definitions of these functions are provided, using PMF to
calculate the residency.

NOTE: Previously, platforms did not have to explicitly set
`ENABLE_PMF` since this was automatically done by the top-level
Makefile.

Change-Id: I17b47804dea68c77bc284df15ee1ccd66bc4b79b
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

This patch adds support for NODE_HW_STATE PSCI API by introducing a new
PSCI platform hook (get_node_hw_state). The implementation validates
supplied arguments, and then invokes this platform-defined hook and
returns its result to the caller. PSCI capabilities are updated
accordingly.

Also updates porting and firmware design guides.

Change-Id: I808e55bdf0c157002a7c104b875779fe50a68a30

A PSCI CPU_SUSPEND request to place a CPU in retention states at power levels
higher than the CPU power level is subject to the same state coordination as a
power down state. A CPU could implement multiple retention states at a
particular power level. When exiting WFI, the non-CPU power levels may be in a
different retention state to what was initially requested, therefore each CPU
should refresh its view of the states of all power levels.

Previously, a CPU re-used the state of the power levels when it entered the
retention state. This patch fixes this issue by ensuring that a CPU upon exit
from retention reads the state of each power level afresh.

Change-Id: I93b5f5065c63400c6fd2598dbaafac385748f989

This patch introduces the PSCI Library interface. The major changes
introduced are as follows:

* Earlier BL31 was responsible for Architectural initialization during cold
boot via bl31_arch_setup() whereas PSCI was responsible for the same during
warm boot. This functionality is now consolidated by the PSCI library
and it does Architectural initialization via psci_arch_setup() during both
cold and warm boots.

* Earlier the warm boot entry point was always `psci_entrypoint()`. This was
not flexible enough as a library interface. Now PSCI expects the runtime
firmware to provide the entry point via `psci_setup()`. A new function
`bl31_warm_entrypoint` is introduced in BL31 and the previous
`psci_entrypoint()` is deprecated.

* The `smc_helpers.h` is reorganized to separate the SMC Calling Convention
defines from the Trusted Firmware SMC helpers. The former is now in a new
header file `smcc.h` and the SMC helpers are moved to Architecture specific
header.

* The CPU context is used by PSCI for context initialization and
restoration after power down (PSCI Context). It is also used by BL31 for SMC
handling and context management during Normal-Secure world switch (SMC
Context). The `psci_smc_handler()` interface is redefined to not use SMC
helper macros thus enabling to decouple the PSCI context from EL3 runtime
firmware SMC context. This enables PSCI to be integrated with other runtime
firmware using a different SMC context.

NOTE: With this patch the architectural setup done in `bl31_arch_setup()`
is done as part of `psci_setup()` and hence `bl31_platform_setup()` will be
invoked prior to architectural setup. It is highly unlikely that the platform
setup will depend on architectural setup and cause any failure. Please be
be aware of this change in sequence.

Change-Id: I7f497a08d33be234bbb822c28146250cb20dab73

This patch moves the PSCI services and BL31 frameworks like context
management and per-cpu data into new library components `PSCI` and
`el3_runtime` respectively. This enables PSCI to be built independently from
BL31. A new `psci_lib.mk` makefile is introduced which adds the relevant
PSCI library sources and gets included by `bl31.mk`. Other changes which
are done as part of this patch are:

* The runtime services framework is now moved to the `common/` folder to
  enable reuse.
* The `asm_macros.S` and `assert_macros.S` helpers are moved to architecture
  specific folder.
* The `plat_psci_common.c` is moved from the `plat/common/aarch64/` folder
  to `plat/common` folder. The original file location now has a stub which
  just includes the file from new location to maintain platform compatibility.

Most of the changes wouldn't affect platform builds as they just involve
changes to the generic bl1.mk and bl31.mk makefiles.

NOTE: THE `plat_psci_common.c` FILE HAS MOVED LOCATION AND THE STUB FILE AT
THE ORIGINAL LOCATION IS NOW DEPRECATED. PLATFORMS SHOULD MODIFY THEIR
MAKEFILES TO INCLUDE THE FILE FROM THE NEW LOCATION.

Change-Id: I6bd87d5b59424995c6a65ef8076d4fda91ad5e86

This patch reworks type usage in generic code, drivers and ARM platform files
to make it more portable. The major changes done with respect to
type usage are as listed below:

* Use uintptr_t for storing address instead of uint64_t or unsigned long.
* Review usage of unsigned long as it can no longer be assumed to be 64 bit.
* Use u_register_t for register values whose width varies depending on
  whether AArch64 or AArch32.
* Use generic C types where-ever possible.

In addition to the above changes, this patch also modifies format specifiers
in print invocations so that they are AArch64/AArch32 agnostic. Only files
related to upcoming feature development have been reworked.

Change-Id: I9f8c78347c5a52ba7027ff389791f1dad63ee5f8

This patch adds following optional PSCI STAT functions:

- PSCI_STAT_RESIDENCY: This call returns the amount of time spent
  in power_state in microseconds, by the node represented by the
  `target_cpu` and the highest level of `power_state`.

- PSCI_STAT_COUNT: This call returns the number of times a
  `power_state` has been used by the node represented by the
  `target_cpu` and the highest power level of `power_state`.

These APIs provides residency statistics for power states that has
been used by the platform. They are implemented according to v1.0
of the PSCI specification.

By default this optional feature is disabled in the PSCI
implementation. To enable it, set the boolean flag
`ENABLE_PSCI_STAT` to 1. This also sets `ENABLE_PMF` to 1.

Change-Id: Ie62e9d37d6d416ccb1813acd7f616d1ddd3e8aff

The "end power level" value passed as the 3rd argument to the
psci_cpu_on_start() function is not used so this patch removes it.

Change-Id: Icaa68b8c4ecd94507287970455fbff354faaa41e

When a CPU is powered down using PSCI CPU OFF API, it disables its caches
and updates its `aff_info_state` to OFF. The corresponding cache line is
invalidated by the CPU so that the update will be observed by other CPUs
running with caches enabled. There is a possibility that another CPU
which has been trying to turn ON this CPU via PSCI CPU ON API,
has already seen the update to `aff_info_state` and proceeds to update
the state to ON_PENDING prior to the cache invalidation. This may result
in the update of the state to ON_PENDING being discarded.

This patch fixes this issue by making sure that the update of `aff_info_state`
to ON_PENDING sticks by reading back the value after the cache flush and
retrying it if not updated. The patch also adds a dsbish() to
`psci_do_cpu_off()` to ensure ordering of the update to `aff_info_state`
prior to cache line invalidation.

Fixes ARM-software/tf-issues#349

Change-Id: I225de99957fe89871f8c57bcfc243956e805dcca

Change-Id: I6f49bd779f2a4d577c6443dd160290656cdbc59b

This patch unifies the bakery lock api's across coherent and normal
memory implementation of locks by using same data type `bakery_lock_t`
and similar arguments to functions.

A separate section `bakery_lock` has been created and used to allocate
memory for bakery locks using `DEFINE_BAKERY_LOCK`. When locks are
allocated in normal memory, each lock for a core has to spread
across multiple cache lines. By using the total size allocated in a
separate cache line for a single core at compile time, the memory for
other core locks is allocated at link time by multiplying the single
core locks size with (PLATFORM_CORE_COUNT - 1). The normal memory lock
algorithm now uses lock address instead of the `id` in the per_cpu_data.
For locks allocated in coherent memory, it moves locks from
tzfw_coherent_memory to bakery_lock section.

The bakery locks are allocated as part of bss or in coherent memory
depending on usage of coherent memory. Both these regions are
initialised to zero as part of run_time_init before locks are used.
Hence, bakery_lock_init() is made an empty function as the lock memory
is already initialised to zero.

The above design lead to the removal of psci bakery locks from
non_cpu_power_pd_node to psci_locks.

NOTE: THE BAKERY LOCK API WHEN USE_COHERENT_MEM IS NOT SET HAS CHANGED.
THIS IS A BREAKING CHANGE FOR ALL PLATFORM PORTS THAT ALLOCATE BAKERY
LOCKS IN NORMAL MEMORY.

Change-Id: Ic3751c0066b8032dcbf9d88f1d4dc73d15f61d8b

This patch reworks the PSCI generic implementation to conform to ARM
Trusted Firmware coding guidelines as described here:
https://github.com/ARM-software/arm-trusted-firmware/wiki

This patch also reviews the use of signed data types within PSCI
Generic code and replaces them with their unsigned counterparts wherever
they are not appropriate. The PSCI_INVALID_DATA macro which was defined
to -1 is now replaced with PSCI_INVALID_PWR_LVL macro which is defined
to PLAT_MAX_PWR_LVL + 1.

Change-Id: Iaea422d0e46fc314e0b173c2b4c16e0d56b2515a

As per PSCI1.0 specification, the error code to be returned when an invalid
non secure entrypoint address is specified by the PSCI client for CPU_SUSPEND,
CPU_ON or SYSTEM_SUSPEND must be PSCI_E_INVALID_ADDRESS. The current PSCI
implementation returned PSCI_E_INVAL_PARAMS. This patch rectifies this error
and also implements a common helper function to validate the entrypoint
information to be used across these PSCI API implementations.

Change-Id: I52d697d236c8bf0cd3297da4008c8e8c2399b170

This commit does the switch to the new PSCI framework implementation replacing
the existing files in PSCI folder with the ones in PSCI1.0 folder. The
corresponding makefiles are modified as required for the new implementation.
The platform.h header file is also is switched to the new one
as required by the new frameworks. The build flag ENABLE_PLAT_COMPAT defaults
to 1 to enable compatibility layer which let the existing platform ports to
continue to build and run with minimal changes.

The default weak implementation of platform_get_core_pos() is now removed from
platform_helpers.S and is provided by the compatibility layer.

Note: The Secure Payloads and their dispatchers still use the old platform
and framework APIs and hence it is expected that the ENABLE_PLAT_COMPAT build
flag will remain enabled in subsequent patch. The compatibility for SPDs using
the older APIs on platforms migrated to the new APIs will be added in the
following patch.

Change-Id: I18c51b3a085b564aa05fdd98d11c9f3335712719

This patch adds support for SYSTEM_SUSPEND API as mentioned in the PSCI 1.0
specification. This API, on being invoked on the last running core on a
supported platform, will put the system into a low power mode with memory
retention.

The psci_afflvl_suspend() internal API has been reused as most of the actions
to suspend a system are the same as invoking the PSCI CPU_SUSPEND API with the
target affinity level as 'system'. This API needs the 'power state' parameter
for the target low power state. This parameter is not passed by the caller of
the SYSTEM_SUSPEND API. Hence, the platform needs to implement the
get_sys_suspend_power_state() platform function to provide this information.
Also, the platform also needs to add support for suspending the system to the
existing 'plat_pm_ops' functions: affinst_suspend() and
affinst_suspend_finish().

Change-Id: Ib6bf10809cb4e9b92f463755608889aedd83cef5

This patch removes the plat_get_max_afflvl() platform API
and instead replaces it with a platform macro PLATFORM_MAX_AFFLVL.
This is done because the maximum affinity level for a platform
is a static value and it is more efficient for it to be defined
as a platform macro.

NOTE: PLATFORM PORTS NEED TO BE UPDATED ON MERGE OF THIS COMMIT

Fixes ARM-Software/tf-issues#265

Change-Id: I31d89b30c2ccda30d28271154d869060d50df7bf

This patch implements the PSCI_FEATURES function which is a mandatory
API in the PSCI 1.0 specification. A capability variable is
constructed during initialization by examining the plat_pm_ops and
spd_pm_ops exported by the platform and the Secure Payload Dispatcher.
This is used by the PSCI FEATURES function to determine which
PSCI APIs are supported by the platform.

Change-Id: I147ffc1bd5d90b469bd3cc4bbe0a20e95c247df7

This patch reworks the PSCI MIGRATE, MIGRATE_INFO_TYPE and
MIGRATE_INFO_UP_CPU support for Trusted Firmware. The
implementation does the appropriate validation of parameters
and invokes the appropriate hook exported by the SPD.

The TSP is a MP Trusted OS. Hence the ability to actually
migrate a Trusted OS has not been implemented. The
corresponding function is not populated in the spd_pm_hooks
structure for the TSPD.

The `spd_pm_ops_t` has undergone changes with this patch.
SPD PORTS MAY NEED TO BE UPDATED.

Fixes ARM-software/tf-issues#249

Change-Id: Iabd87521bf7c530a5e4506b6d3bfd4f1bf87604f

This patch allows the platform to validate the power_state and
entrypoint information from the normal world early on in PSCI
calls so that we can return the error safely. New optional
pm_ops hooks `validate_power_state` and `validate_ns_entrypoint`
are introduced to do this.

As a result of these changes, all the other pm_ops handlers except
the PSCI_ON handler are expected to be successful. Also, the PSCI
implementation will now assert if a PSCI API is invoked without the
corresponding pm_ops handler being registered by the platform.

NOTE : PLATFORM PORTS WILL BREAK ON MERGE OF THIS COMMIT. The
pm hooks have 2 additional optional callbacks and the return type
of the other hooks have changed.

Fixes ARM-Software/tf-issues#229

Change-Id: I036bc0cff2349187c7b8b687b9ee0620aa7e24dc

This patch adds support to save the "power state" parameter before the
affinity level specific handlers are called in a CPU_SUSPEND call.
This avoids the need to pass the power_state as a parameter to the
handlers and Secure Payload Dispatcher (SPD) suspend spd_pm_ops.
The power_state arguments in the spd_pm_ops operations are now reserved
and must not be used. The SPD can query the relevant power_state fields
by using the psci_get_suspend_afflvl() & psci_get_suspend_stateid() APIs.

NOTE: THIS PATCH WILL BREAK THE SPD_PM_OPS INTERFACE. HENCE THE SECURE
PAYLOAD DISPATCHERS WILL NEED TO BE REWORKED TO USE THE NEW INTERFACE.

Change-Id: I1293d7dc8cf29cfa6a086a009eee41bcbf2f238e

This patch replaces the internal psci_save_ns_entry() API with a
psci_get_ns_ep_info() API. The new function splits the work done by the
previous one such that it populates and returns an 'entry_point_info_t'
structure with the information to enter the normal world upon completion
of the CPU_SUSPEND or CPU_ON call. This information is used to populate
the non-secure context structure separately.

This allows the new internal API `psci_get_ns_ep_info` to return error
and enable the code to return safely.

Change-Id: Ifd87430a4a3168eac0ebac712f59c93cbad1b231

This patch moves the bakery locks out of coherent memory to normal memory.
This implies that the lock information needs to be placed on a separate cache
line for each cpu. Hence the bakery_lock_info_t structure is allocated in the
per-cpu data so as to minimize memory wastage. A similar platform per-cpu
data is introduced for the platform locks.

As a result of the above changes, the bakery lock api is completely changed.
Earlier, a reference to the lock structure was passed to the lock implementation.
Now a unique-id (essentially an index into the per-cpu data array) and an offset
into the per-cpu data for bakery_info_t needs to be passed to the lock
implementation.

Change-Id: I1e76216277448713c6c98b4c2de4fb54198b39e0

This patch fixes the array size of mpidr_aff_map_nodes_t which
was less by one element.

Fixes ARM-software/tf-issues#264

Change-Id: I48264f6f9e7046a3d0f4cbcd63b9ba49657e8818

This patch implements the following cleanups in PSCI generic code:

1. It reworks the affinity level specific handlers in the PSCI implementation
   such that.

   a. Usage of the 'rc' local variable is restricted to only where it is
      absolutely needed

   b. 'plat_state' local variable is defined only when a direct invocation of
      plat_get_phys_state() does not suffice.

   c. If a platform handler is not registered then the level specific handler
      returns early.

2. It limits the use of the mpidr_aff_map_nodes_t typedef to declaration of
   arrays of the type instead of using it in function prototypes as well.

3. It removes dangling declarations of __psci_cpu_off() and
   __psci_cpu_suspend(). The definitions of these functions were removed in
   earlier patches.

Change-Id: I51e851967c148be9c2eeda3a3c41878f7b4d6978

This patch adds APIs to find, save and retrieve the highest affinity level which
will enter or exit from the physical OFF state during a PSCI power management
operation. The level is stored in per-cpu data.

It then reworks the PSCI implementation to perform cache maintenance only
when the handler for the highest affinity level to enter/exit the OFF state is
called.

For example. during a CPU_SUSPEND operation, state management is done prior to
calling the affinity level specific handlers. The highest affinity level which
will be turned off is determined using the psci_find_max_phys_off_afflvl()
API. This level is saved using the psci_set_max_phys_off_afflvl() API. In the
code that does generic handling for each level, prior to performing cache
maintenance it is first determined if the current affinity level matches the
value returned by psci_get_max_phys_off_afflvl(). Cache maintenance is done if
the values match.

This change allows the last CPU in a cluster to perform cache maintenance
independently. Earlier, cache maintenance was started in the level 0 handler and
finished in the level 1 handler. This change in approach will facilitate
implementation of tf-issues#98.

Change-Id: I57233f0a27b3ddd6ddca6deb6a88b234525b0ae6

This patch pulls out state management from the affinity level specific handlers
into the top level functions specific to the operation
i.e. psci_afflvl_suspend(), psci_afflvl_on() etc.

In the power down path this patch will allow an affinity instance at level X to
determine the state that an affinity instance at level X+1 will enter before the
level specific handlers are called. This will be useful to determine whether a
CPU is the last in the cluster during a suspend/off request and so on.

Similarly, in the power up path this patch will allow an affinity instance at
level X to determine the state that an affinity instance at level X+1 has
emerged from, even after the level specific handlers have been called. This will
be useful in determining whether a CPU is the first in the cluster during a
on/resume request and so on.

As before, while powering down, state is updated before the level specific
handlers are invoked so that they can perform actions based upon their target
state. While powering up, state is updated after the level specific handlers have
been invoked so that they can perform actions based upon the state they emerged
from.

Change-Id: I40fe64cb61bb096c66f88f6d493a1931243cfd37

This patch adds a structure defined by the PSCI service to the per-CPU data
array. The structure is used to save the 'power_state' parameter specified
during a 'cpu_suspend' call on the current CPU. This parameter was being saved
in the cpu node in the PSCI topology tree earlier.

The existing API to return the state id specified during a PSCI CPU_SUSPEND call
i.e. psci_get_suspend_stateid(mpidr) has been renamed to
psci_get_suspend_stateid_by_mpidr(mpidr). The new psci_get_suspend_stateid() API
returns the state id of the current cpu.

The psci_get_suspend_afflvl() API has been changed to return the target affinity
level of the current CPU. This was specified using the 'mpidr' parameter in the
old implementation.

The behaviour of the get_power_on_target_afflvl() has been tweaked such that
traversal of the PSCI topology tree to locate the affinity instance node for the
current CPU is done only in the debug build as it is an expensive operation.

Change-Id: Iaad49db75abda471f6a82d697ee6e0df554c4caf

This patch adds support for SYSTEM_OFF and SYSTEM_RESET PSCI
operations. A platform should export handlers to complete the
requested operation. The FVP port exports fvp_system_off() and
fvp_system_reset() as an example.

If the SPD provides a power management hook for system off and
system reset, then the SPD is notified about the corresponding
operation so it can do some bookkeeping. The TSPD exports
tspd_system_off() and tspd_system_reset() for that purpose.

Versatile Express shutdown and reset methods have been removed
from the FDT as new PSCI sys_poweroff and sys_reset services
have been added. For those kernels that do not support yet these
PSCI services (i.e. GICv3 kernel), the original dtsi files have
been renamed to *-no_psci.dtsi.

Fixes ARM-software/tf-issues#218

Change-Id: Ic8a3bf801db979099ab7029162af041c4e8330c8

This patch uses stacks allocated in normal memory to enable the MMU early in the
warm boot path thus removing the dependency on stacks allocated in coherent
memory. Necessary cache and stack maintenance is performed when a cpu is being
powered down and up. This avoids any coherency issues that can arise from
reading speculatively fetched stale stack memory from another CPUs cache. These
changes affect the warm boot path in both BL3-1 and BL3-2.

The EL3 system registers responsible for preserving the MMU state are not saved
and restored any longer. Static values are used to program these system
registers when a cpu is powered on or resumed from suspend.

Change-Id: I8357e2eb5eb6c5f448492c5094b82b8927603784

Many of the interfaces internal to PSCI pass the current CPU
MPIDR_EL1 value from function to function. This is not required,
and with inline access to the system registers is less efficient
than requiring the code to read that register whenever required.

This patch remove the mpidr parameter from the affected interfaces
and reduces code in FVP BL3-1 size by 160 bytes.

Change-Id: I16120a7c6944de37232016d7e109976540775602

The array of affinity nodes is currently allocated for 32 entries
with the PSCI_NUM_AFFS value defined in psci.h. This is not enough
for large systems, and will substantially over allocate the array
for small systems.

This patch introduces an optional platform definition
PLATFORM_NUM_AFFS to platform_def.h. If defined this value is
used for PSCI_NUM_AFFS, otherwise a value of two times the number
of CPU cores is used.

The FVP port defines PLATFORM_NUM_AFFS to be 10 which saves
nearly 1.5KB of memory.

Fixes ARM-software/tf-issues#192

Change-Id: I68e30ac950de88cfbd02982ba882a18fb69c1445

psci_suspend_context is an array of cache-line aligned structures
containing the single power_state integer per cpu. This array is
the only structure indexed by the aff_map_node.data integer.

This patch saves 2KB of BL3-1 memory by placing the CPU
power_state value directly in the aff_map_node structure. As a
result, this value is now never cached and the cache clean when
writing the value is no longer required.

Fixes ARM-software/tf-issues#195

Change-Id: Ib4c70c8f79eed295ea541e7827977a588a19ef9b

Consolidate all BL3-1 CPU context initialization for cold boot, PSCI
and SPDs into two functions:
*  The first uses entry_point_info to initialize the relevant
   cpu_context for first entry into a lower exception level on a CPU
*  The second populates the EL1 and EL2 system registers as needed
   from the cpu_context to ensure correct entry into the lower EL

This patch alters the way that BL3-1 determines which exception level
is used when first entering EL1 or EL2 during cold boot - this is now
fully determined by the SPSR value in the entry_point_info for BL3-3,
as set up by the platform code in BL2 (or otherwise provided to BL3-1).

In the situation that EL1 (or svc mode) is selected for a processor
that supports EL2, the context management code will now configure all
essential EL2 register state to ensure correct execution of EL1. This
allows the platform code to run non-secure EL1 payloads directly
without requiring a small EL2 stub or OS loader.

Change-Id: If9fbb2417e82d2226e47568203d5a369f39d3b0f

Some data variables were declared but not used. These have been
removed.

Change-Id: I038632af3c32d88984cd25b886c43ff763269bf9

Function declarations implicitly have external linkage so do not
need the extern keyword.

Change-Id: Ia0549786796d8bf5956487e8996450a0b3d79f32