Skip to content

GitLab

Switch branch/tag
  1. 11 Sep, 2019 2 commits
  3. 05 Sep, 2019 23 commits
  5. 20 Aug, 2019 1 commit
    • Manish Pandey's avatar
      plat/arm: Introduce corstone700 platform. · 7bdc4698
      Manish Pandey authored 
      

This patch adds support for Corstone-700 foundation IP, which integrates
both Cortex-M0+ and Cortex-A(Host) processors in one handy, flexible
subsystem.
This is an example implementation of Corstone-700 IP host firmware.

Cortex-M0+ will take care of boot stages 1 and 2(BL1/BL2) as well as
bringing Host out RESET. Host will start execution directly from BL32 and
then will jump to Linux.

It is an initial port and additional features are expected to be added
later.

Change-Id: I7b5c0278243d574284b777b2408375d007a7736e
Signed-off-by: default avatarManish Pandey <manish.pandey2@arm.com>
      7bdc4698
  7. 19 Aug, 2019 3 commits
  9. 16 Aug, 2019 3 commits
    • Alexei Fedorov's avatar
      FVP: Add Delay Timer driver to BL1 and BL31 · 1b597c22
      Alexei Fedorov authored 
      

SMMUv3 driver functions which are called from BL1 and BL31
currently use counter-based poll method for testing status
bits. Adding Delay Timer driver to BL1 and BL31 is required
for timeout-based implementation using timer delay functions
for SMMU and other drivers.
This patch adds new function `fvp_timer_init()` which
initialises either System level generic or SP804 timer based on
FVP_USE_SP804_TIMER build flag.
In BL2U `bl2u_early_platform_setup()` function the call to
`arm_bl2u_early_platform_setup()` (which calls
`generic_delay_timer_init()` ignoring FVP_USE_SP804_TIMER flag),
is replaced with `arm_console_boot_init()` and `fvp_timer_init()`.

Change-Id: Ifd8dcebf4019e877b9bc5641551deef77a44c0d1
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      1b597c22
    • Marek Vasut's avatar
      rcar_gen3: plat: Rename RCAR_PRODUCT_* to PRR_PRODUCT_* · df51d8fe
      Marek Vasut authored 
      

Rename RCAR_PRODUCT_* to PRR_PRODUCT_* and drop the duplicate
RCAR_PRODUCT_* macro.
Signed-off-by: default avatarMarek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: I6b2789790b85edb79c026f0860d70f323d113d96
      df51d8fe
    • Marek Vasut's avatar
      rcar_gen3: plat: Factor out PRR_ macros into rcar_def.h · 7c103d60
      Marek Vasut authored 
      

Pull out the PRR_* macros into rcar_def.h and remove multiple copies of
it. Now that there are still RCAR_* macros in rcar_def.h too and they
have the exact same meaning as the PRR_* macros, but that's for another
patch.
Signed-off-by: default avatarMarek Vasut <marek.vasut+renesas@gmail.com>
Change-Id: Icb7f61b971b1a23102bd1b9f58cda580660a55fc
      7c103d60
  11. 15 Aug, 2019 2 commits
  13. 14 Aug, 2019 1 commit
  15. 13 Aug, 2019 2 commits
  17. 09 Aug, 2019 2 commits
    • Heiko Stuebner's avatar
      rockchip: rk3399: store actual debug uart information on suspend · 0eb7fa91
      Heiko Stuebner authored 
      

The rk3399 suspend code saves and restores the debug uart settings, but
right now always does this for the default uart. Right now this works
only by chance for the majority of rk3399 boards, which do not deviate
from that default.

But both Coreboot as well as U-Boot-based platforms can actually use
different uarts for their output, which can be configured from either
devicetree or Coreboot-variables.

To fix this, just use the stored uart-base information instead of the
default constant.
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
Change-Id: I1ea059d59a1126f6f8702315df7e620e632b686e
      0eb7fa91
    • Heiko Stuebner's avatar
      rockchip: move dt-coreboot uart distinction into param handling code · dd4a0d16
      Heiko Stuebner authored 
      

Rockchip platforms can be booted from either u-boot or coreboot.

So far the Coreboot-console was initizalized from a coreboot data struct
in the early_param2 callbacks and dt-based consoles with data from the
rockchip_get_uart_* functions.

But later code may also need this console information for example for
special suspend handling. To make this easy follow a suggestion from
Julius Werner and move the coreboot<->dt distinction into the
rockchip_get_uart_* functions, thus making correct data about the used
uart available to all Rockchip platform code at all times.

This includes a new rockchip_get_uart_clock as well, because while the
dt-platforms right now always just default the rate defined in a constant
Coreboot provides its own field for the clock rate and we don't want to
loose that information for the console init. Similarly the rk_uart_*
variables should move into the non-Coreboot code, to prevent them from
being marked as unused, which also requires the rk_get_uart_* functions
to move below the actual dt-parsing.
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
Change-Id: I278d595d2aa6c6864187fc8979a9fbff9814feac
      dd4a0d16
  19. 07 Aug, 2019 1 commit