GitLab

* changes:
  feat(plat/mediatek/apu): add mt8192 APU device apc driver
  feat(plat/mediatek/apu): add mt8192 APU SiP call support
  feat(plat/mediatek/apu): add mt8192 APU iommap regions
  feat(plat/mediatek/apu): setup mt8192 APU_S_S_4 and APU_S_S_5 permission

Add APU device apc driver and setup permission.
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
Change-Id: I2bbdb69d11267e4252b2138b5c5ac8faf752740f

Add APU SiP call support for start/stop mcu.
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
Change-Id: Ibf93d8ccf22c414de3093cee9e13f7668588f69e
Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@mediatek.com>

Two issues in documentation were identified after the release.
This patch fixes these typos.

1. Matternhorn ELP CPU was made available through v2.5 release, not
   Matternhorn CPU
2. We had upgraded TF-A to use GCC 10.2 toolchain family and used this
   toolchain for release testing

Change-Id: I33e59bb5a6d13f4d40dbb3352004d5b133431d65
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Use proper offset for IPI data based on offset for IPI0
channel.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
Change-Id: I3070517944dd353c3733aa595df0da030127751a

Add APU iommap settings for reviser, apu_ao and
devapc control wrapper.
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
Change-Id: Ie8e6a197c0f440f9e4ee8101202283a2dbf501a6

Setup APU_S_S_4/APU_S_S_5 permission as SEC_RW_ONLY.
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
Change-Id: I6c50b2913bf34270a1b0ffaf0e0c435fee192a4c

Added support for HW computed CRC using Arm ACLE intrinsics.
These are built-in intrinsics available for ARMv8.1-A, and
onwards.
These intrinsics are enabled via '-march=armv8-a+crc' compile
switch for ARMv8-A (supports CRC instructions optionally).

HW CRC support is enabled unconditionally in BL2 for all Arm
platforms.

HW CRC calculation is verified offline to ensure a similar
result as its respective ZLib utility function.

HW CRC calculation support will be used in the upcoming
firmware update patches.

Change-Id: Ia2ae801f62d2003e89a9c3e6d77469b5312614b3
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>

Disable non-invasive debug of secure state for Juno
in release builds. This makes sure that PMU counts
only Non-secure events.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I0d1c3f96f3b4e48360a7211ae55851d65d291025

* changes:
  docs(prerequisites): add `--no-save` to `npm install`
  fix(hooks): downgrade `package-lock.json` version

To avoid the mistake fixed by the previous commit, ensure users install
the Node.js dependencies without polluting the lock file by passing
`--no-save` to the `npm install` line.

Change-Id: I10b5cc17b9001fc2e26deee02bf99ce033a949c1
Signed-off-by: Chris Kay <chris.kay@arm.com>

The NPM lock file was accidentally updated using a later version of
Node.js than required by the prerequisites. This upgraded the lock file
to the v2 format, which causes a warning on Node.js 14 (the
prerequisites version). This moves the lock file back to v1 by
installing the dependencies with Node.js 14.

Change-Id: I382d599fd2b67b07eb9234d14e7b631db6b11453
Signed-off-by: Chris Kay <chris.kay@arm.com>

Clean up instructions for building/running TF-A on the
Juno platform and add correct link to SCP binaries.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I536f98082e167edbf45f29ca23cc0db44687bb3b

Updated the minor version in the makefile

Change-Id: Ie2b3ce5b36a105a0e2fff52c3740cc9702ca3108
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

An indirect dependency of Commitizen (`merge`) is currently failing the
NPM.js auditor due to vulnerability CVE-2020-28499. This commit moves
the minimum version of Commitizen to 4.2.4, which has resolved this
vulnerability.

Change-Id: Ia9455bdbe02f7406c1a106f173c4095943a201ed
Signed-off-by: Chris Kay <chris.kay@arm.com>

General refresh of the SPM document.

Change-Id: I2f8e37c3f34bc8511b115f00b9a53b6a6ff41bea
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>

Change log for trusted-firmware-a v2.5 release

Change-Id: I6ffc8a40d2cc3a18145b87f895acdc1400db485a
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Removing the "Upcoming" change log due to the change in change log
processing.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I6d2cc095dca3e654bd7e6fec2077c58bfbc48bb5

In the comment in the ARM FPGA DT we promise a generous 100 MB initrd,
but actually describe only a size of 20 MB.

As initrds are the most common and easy userland option for the boards,
let's increase the maximum size to the advertised 100 MB, to avoid
unpacking errors when an initrd exceeds the current limit of 20 MB.

Change-Id: If08ba3fabdad27b2c2aff93b18c3f664728b4348
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Reverting FVP versions to previous version 11.12.38 for Cortex-A32x4
and Neoverse-N2x4.

Change-Id: I81e8ad24794dd425a9e9a66dc8bb02b42191abf1
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>

Standard Secure Services, complying to the SMCCC specification, are
discoverable: Any user can do the SMC call, and derive from the return
value (-1) if the service is implemented. Consequently we should not
*warn* if BL31 does not implement a service, as some services (TRNG, for
instance) might never be implemented for devices, as they are lacking
hardware.

Short of dropping the existing warning message altogether, change the
level to VERBOSE, which should prevent it actually being printed in
normal situations.

This removes the pointless TF-A messages on the console when booting
Linux, as modern kernels now call the SOCID and the TRNG service
unconditionally.

Change-Id: I08b0b02e0f46322ebe0b40b3991c3c9b5bed4f97
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

AMU counters are used for monitoring the CPU performance. RD-V1-MC
platform has architected AMU available for each core. Enable the use of
AMU by non-secure OS for supporting the use of counters for processor
performance control (ACPI CPPC).

Change-Id: I33be594cee669e7f4031e5e5a371eec7c7451030
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>

This is the first release of the public Trusted
Firmware A class threat model. This release
provides the baseline for future updates to be
applied as required by developments to the
TF-A code base.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: I3c9aadc46196837679f0b1377bec9ed4fc42ff11

Updated the list of supported FVP platforms as per the latest FVP
release.

Change-Id: I1abd0a7885b1133715062ee1b176733556a4820e
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>