Skip to content

GitLab

Switch branch/tag
  1. 11 Jun, 2019 1 commit
  3. 06 Jun, 2019 1 commit
  5. 04 Jun, 2019 1 commit
    • John Tsichritzis's avatar
      Apply compile-time check for AArch64-only cores · 629d04f5
      John Tsichritzis authored 
      

Some cores support only AArch64 mode. In those cores, only a limited
subset of the AArch32 system registers are implemented. Hence, if TF-A
is supposed to run on AArch64-only cores, it must be compiled with
CTX_INCLUDE_AARCH32_REGS=0.

Currently, the default settings for compiling TF-A are with the AArch32
system registers included. So, if we compile TF-A the default way and
attempt to run it on an AArch64-only core, we only get a runtime panic.

Now a compile-time check has been added to ensure that this flag has the
appropriate value when AArch64-only cores are included in the build.

Change-Id: I298ec550037fafc9347baafb056926d149197d4c
Signed-off-by: default avatarJohn Tsichritzis <john.tsichritzis@arm.com>
      629d04f5
  7. 28 May, 2019 1 commit
  9. 24 May, 2019 1 commit
    • Alexei Fedorov's avatar
      Add support for Branch Target Identification · 9fc59639
      Alexei Fedorov authored 
      

This patch adds the functionality needed for platforms to provide
Branch Target Identification (BTI) extension, introduced to AArch64
in Armv8.5-A by adding BTI instruction used to mark valid targets
for indirect branches. The patch sets new GP bit [50] to the stage 1
Translation Table Block and Page entries to denote guarded EL3 code
pages which will cause processor to trap instructions in protected
pages trying to perform an indirect branch to any instruction other
than BTI.
BTI feature is selected by BRANCH_PROTECTION option which supersedes
the previous ENABLE_PAUTH used for Armv8.3-A Pointer Authentication
and is disabled by default. Enabling BTI requires compiler support
and was tested with GCC versions 9.0.0, 9.0.1 and 10.0.0.
The assembly macros and helpers are modified to accommodate the BTI
instruction.
This is an experimental feature.
Note. The previous ENABLE_PAUTH build option to enable PAuth in EL3
is now made as an internal flag and BRANCH_PROTECTION flag should be
used instead to enable Pointer Authentication.
Note. USE_LIBROM=1 option is currently not supported.

Change-Id: Ifaf4438609b16647dc79468b70cd1f47a623362e
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      9fc59639
  11. 14 May, 2019 1 commit
  13. 07 May, 2019 2 commits
  15. 03 May, 2019 1 commit
    • John Tsichritzis's avatar
      Add compile-time errors for HW_ASSISTED_COHERENCY flag · 076b5f02
      John Tsichritzis authored 
      This patch fixes this issue:
https://github.com/ARM-software/tf-issues/issues/660



The introduced changes are the following:

1) Some cores implement cache coherency maintenance operation on the
hardware level. For those cores, such as - but not only - the DynamIQ
cores, it is mandatory that TF-A is compiled with the
HW_ASSISTED_COHERENCY flag. If not, the core behaviour at runtime is
unpredictable. To prevent this, compile time checks have been added and
compilation errors are generated, if needed.

2) To enable this change for FVP, a logical separation has been done for
the core libraries. A system cannot contain cores of both groups, i.e.
cores that manage coherency on hardware and cores that don't do it. As
such, depending on the HW_ASSISTED_COHERENCY flag, FVP includes the
libraries only of the relevant cores.

3) The neoverse_e1.S file has been added to the FVP sources.

Change-Id: I787d15819b2add4ec0d238249e04bf0497dc12f3
Signed-off-by: default avatarJohn Tsichritzis <john.tsichritzis@arm.com>
      076b5f02
  17. 25 Apr, 2019 1 commit
  19. 18 Apr, 2019 1 commit
  21. 17 Apr, 2019 3 commits
  23. 12 Apr, 2019 1 commit
  25. 08 Apr, 2019 1 commit
  27. 14 Mar, 2019 4 commits
  29. 13 Mar, 2019 4 commits
  31. 08 Mar, 2019 1 commit
    • Heiko Stuebner's avatar
      Fixup register handling in aarch32 reset_handler · c6c10b02
      Heiko Stuebner authored 
      The BL handover interface stores the bootloader arguments in
registers r9-r12, so when the reset_handler stores the lr pointer
in r10 it clobers one of the arguments.

Adapt to use r8 and adapt the comment about registers allowed
to clober.

I've checked aarch32 reset_handlers and none seem to use higher
registers as far as I can tell.

Fixes: a6f340fe

 ("Introduce the new BL handover interface")
Cc: Soby Mathew <soby.mathew@arm.com>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
      c6c10b02
  33. 28 Feb, 2019 9 commits
  35. 27 Feb, 2019 1 commit
    • Varun Wadekar's avatar
      Tegra: Support for scatterfile for the BL31 image · c2ad38ce
      Varun Wadekar authored 
      

This patch provides support for using the scatterfile format as
the linker script with the 'armlink' linker for Tegra platforms.

In order to enable the scatterfile usage the following changes
have been made:

* provide mapping for ld.S symbols in bl_common.h
* include bl_common.h from all the affected files
* update the makefile rules to use the scatterfile and armlink
  to compile BL31
* update pubsub.h to add sections to the scatterfile

NOTE: THIS CHANGE HAS BEEN VERIFIED WITH TEGRA PLATFORMS ONLY.

Change-Id: I7bb78b991c97d74a842e5635c74cb0b18e0fce67
Signed-off-by: default avatarVarun Wadekar <vwadekar@nvidia.com>
      c2ad38ce
  37. 26 Feb, 2019 5 commits