GitLab

Makefile for fiptool already prints verbose line when is (re)building
fiptool, so there is no need to print it also from top level Makefile.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I6936a508702f1bf796d17578bb1f043f06365319

Calling 'make clean' in 'all' target is causing recompilation of binary
at every 'make' call, which is wrong.

Also building a new target via 'make TARGET' can cause infinite loop as
it is not defined as explicit make dependency. Dependent targets must be
specified after colon when defining target, which also prevents infinite
loops as make is able to detect these circular dependencies.

Moreover calling 'make clean' is supposed to be done by user when
configuration is changing.

So remove calling 'make clean' in 'all' target and define dependency for
'${PROJECT}' at correct place.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I70e7fd2b04b02f6a0650c82df91d58c9a4cb24d9

* changes:
  drivers: marvell: comphy-a3700: Set TXDCLK_2X_SEL bit during PCIe initialization
  drivers: marvell: comphy-a3700: Set mask parameter for every reg_set call
  drivers: marvell: comphy-a3700: Fix configuring polarity invert bits

* changes:
  plat: imx8mm: Add image load logic for TBBR FIP booting
  plat: imx8mm: Add initial defintions to facilitate FIP layout
  plat: imx8mm: Add image io-storage logic for TBBR FIP booting
  plat: imx8mm: Add imx8mm_private.h to the build

Since there is a secure and non-secure version of the timer registers
there is no need to preserve their context in EL3.
With that, following registers were removed from EL3 save/restore
routine:
	cnthps_ctl_el2
	cnthps_tval_el2
	cnthps_cval_el2
	cnthvs_ctl_el2
	cnthvs_tval_el2
	cnthvs_cval_el2
	cnthp_ctl_el2
	cnthp_cval_el2
	cnthp_tval_el2
	cnthv_ctl_el2
	cnthv_cval_el2
	cnthv_tval_el2
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: I6e2fc09c74a7375c4fccc11f12af4e39e6dc616b

* changes:
  plat/arm/arm_image_load: refine plat_add_sp_images_load_info
  plat/arm/arm_image_load: fix bug of overriding the last node

Marvell Armada 3700 Functional Specifications, section 52.2 PCIe Link
Initialization says that TXDCLK_2X_SEL bit needs to be enabled for PCIe
Root Complex mode. Both U-Boot and Linux kernel support only Root Complex
mode. Set this bit.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Id2a538c379b911b62597f9463b4842b7b5c24df7

The third argument of the reg_set() function has name 'mask', which
indicates that it is a mask applied to the register value which is
going to be updated. But the implementation of this function uses
this argument to clear prior value of the register, i.e. instead of
  new_val = (old_val & ~mask) | (data & mask);
it does
  new_val = (new_val & ~mask) | data;

(The more proper name for this function should be reg_clrsetbits(),
 since internally it calls mmio_clrsetbits_32().)

To make code more readable set 'mask' argument to real mask, i.e. bits
of register values which are going to be updated.

This patch does not make any functional change, only cosmetic, due to
how 'mask' is interpreted.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ifa0339e79c07d1994c7971b65d966b92cb735f65

TXD_INVERT_BIT or RXD_INVERT_BIT needs to be set only in case when
appropriate polarity is inverted. Otherwise these bits should be
cleared.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I8b09fab883a7b995fd72a7d8ae6233f0fa07011b

Refine the function plat_add_sp_images_load_info() by saving the
previous node and only setting its next link when the current node is
valid. This can reduce the check for the next node and simply the
total logic.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I4061428bf49ef0c3816ac22aaeb2e50315531f88

The traverse flow in function plat_add_sp_images_load_info() will find
the last node in the main load info list, with its
next_load_info==NULL. However this node is still useful and should not
be overridden with SP node info.

The bug will cause below error on RDN2 for spmd enabled:

ERROR:   Invalid NT_FW_CONFIG DTB passed

Fix the bug by only setting the next_load_info of the last node in the
original main node list.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: Icaee5da1f2d53b29fdd6085a8cc507446186fd57

Cortex A77 erratum 1946167 is a Cat B erratum that applies to revisions
<= r1p1. This erratum is avoided by inserting a DMB ST before acquire
atomic instructions without release semantics through a series of
writes to implementation defined system registers.

SDEN can be found here:
https://documentation-service.arm.com/static/600057a29b9c2d1bb22cd1be?token=

Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I53e3b4fb7e7575ec83d75c2f132eda5ae0b4f01f

Add basic support for Cortex_A78C CPU.
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com>
Change-Id: Id9e41cbe0580a68c6412d194a5ee67940e8dae56

* changes:
  allwinner: H616: Add reserved-memory node to DT
  allwinner: Add Allwinner H616 SoC support
  allwinner: Add H616 SoC ID
  allwinner: Express memmap more dynamically
  allwinner: Move sunxi_cpu_power_off_self() into platforms
  allwinner: Move SEPARATE_NOBITS_REGION to platforms
  doc: allwinner: Reorder sections, document memory mapping

* changes:
  plat/sgi: allow usage of secure partions on rdn2 platform
  board/rdv1mc: initialize tzc400 controllers
  plat/sgi: allow access to TZC controller on all chips
  plat/sgi: define memory regions for multi-chip platforms
  plat/sgi: allow access to nor2 flash and system registers from s-el0
  plat/sgi: define default list of memory regions for dmc620 tzc
  plat/sgi: improve macros defining cper buffer memory region
  plat/sgi: refactor DMC-620 error handling SMC function id
  plat/sgi: refactor SDEI specific macros

Add the secure partition mmap table and the secure partition boot
information to support secure partitions on RD-N2 platform. In addition
to this, add the required memory region mapping for accessing the
SoC peripherals from the secure partition.
Signed-off-by: Omkar Anand Kulkarni <omkar.kulkarni@arm.com>
Change-Id: I2c75760d6c8c3da3ff4885599be420e924aeaf3c

* changes:
  stm32mp1: add TZC400 interrupt management
  stm32mp1: use TZC400 macro to describe filters
  tzc400: add support for interrupts

A TZC400 controller is placed inline on DRAM channels and regulates
the secure and non-secure accesses to both secure and non-secure
regions of the DRAM memory. Configure each of the TZC controllers
across the Chips.

For use by secure software, configure the first chip's trustzone
controller to protect the upper 16MB of the memory of the first DRAM
block for secure accesses only. The other regions are configured for
non-secure read write access. For all the remote chips, all the DRAM
regions are allowed for non-secure read and write access.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I809f27eccadfc23ea0ef64e2fd87f95eb8f195c1

On a multi-chip platform, the boot CPU on the first chip programs the
TZC controllers on all the remote chips. Define a memory region map for
the TZC controllers for all the remote chips and include it in the BL2
memory map table.

In addition to this, for SPM_MM enabled multi-chip platforms, increase
the number of mmap entries and xlat table counts for EL3 execution
context as well because the shared RAM regions and GIC address space of
remote chips are accessed.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: I6f0b5fd22f9f28046451e382eef7f1f9258d88f7

For multi-chip platforms, add a macro to define the memory regions on
chip numbers >1 and its associated access permissions. These memory
regions are marked with non-secure access.
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
Change-Id: If3d6180fd8ea61f45147c39d3140d694abf06617

Allow the access of system registers and nor2 flash memory region
from s-el0. This allows the secure parititions residing at s-el0
to access these memory regions.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I3887a86770de806323fbde0d20fdc96eec6e0c3c

Define a default DMC-620 TZC memory region configuration and use it to
specify the TZC memory regions on sgi575, rdn1edge and rde1edge
platforms. The default DMC-620 TZC memory regions are defined
considering the support for secure paritition as well.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: Iedee3e57d0d3de5b65321444da51ec990d3702db

Remove the 'ARM_' prefix from the macros defining the CPER buffer memory
and replace it with 'CSS_SGI_' prefix. These macros are applicable only
for platforms supported within plat/sgi. In addition to this, ensure
that these macros are defined only if the RAS_EXTENSION build option is
enabled.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I44df42cded18d9d3a4cb13e5c990e9ab3194daee

The macros defining the SMC function ids for DMC-620 error handling are
listed in the sgi_base_platform_def.h header file. But these macros are
not applicable for all platforms supported under plat/sgi. So move these
macro definitions to sgi_ras.c file in which these are consumed. While
at it, remove the AArch32 and error injection function ids as these are
unused.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I249b54bf4c1b1694188a1e3b297345b942f16bc9

The macros specific to SDEI defined in the sgi_base_platform_def.h are
not applicable for all the platforms supported by plat/sgi. So refactor
the SDEI specific macros into a new header file and include this file on
only on platforms it is applicable on.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Change-Id: I0cb7125334f02a21cae1837cdfd765c16ab50bf5

Broadcom I2C controller driver. Follwoing API's are supported:-
- i2c_init() Intialize ethe I2C controller
- i2c_probe()
- i2c_set_bus_speed() Set the I2C bus speed
- i2c_get_bus_speed() Get the current bus speed
- i2c_recv_byte() Receive one byte of data.
- i2c_send_byte() Send one byteof data
- i2c_read_byte() Read single byte of data
- i2c_read() Read multiple bytes of data
- i2c_write_byte Write single byte of data
- i2c_write() Write multiple bytes of data

This driver is verified by reading the DDR SPD data.
Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>
Change-Id: I2d7fe53950e8b12fab19d0293020523ff8b74e13

When the BL31 for the Allwinner H616 runs in DRAM, we need to make sure
we tell the non-secure world about the memory region it uses.

Add a reserved-memory node to the DT, which covers the area that BL31
could occupy. The "no-map" property will prevent OSes from mapping
the area, so there would be no speculative accesses.

Change-Id: I808f3e1a8089da53bbe4fc6435a808e9159831e1
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

The new Allwinner H616 SoC lacks the management controller and the secure
SRAM A2, so we need to tweak the memory map quite substantially:
We run BL31 in DRAM. Since the DRAM starts at 1GB, we cannot use our
compressed virtual address space (max 256MB) anymore, so we revert to
the full 32bit VA space and use a flat mapping throughout all of it.

The missing controller also means we need to always use the native PSCI
ops, using the CPUIDLE hardware, as SCPI and suspend depend on the ARISC.

Change-Id: I77169b452cb7f5dc2ef734f3fc6e5d931749141d
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Change-Id: I557fd05401e24204952135cf3ca26479a43ad1f1
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

In preparation for changing the memory map, express the locations of the
various code and data pieces more dynamically, allowing SoCs to override
the memmap later.
Also prepare for the SCP region to become optional.

No functional change.

Change-Id: I7ac01e309be2f23bde2ac2050d8d5b5e3d6efea2
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

The code to power the current core off when SCPI is not available is now
different for the two supported SoC families.
To make adding new platforms easier, move sunxi_cpu_power_off_self()
into the SoC directory, so we don't need to carry definitions for both
methods for all SoCs.

On the H6 we just need to trigger the CPUIDLE hardware, so can get rid
of all the code to program the ARISC, which is now only needed for the
A64 version.

Change-Id: Id2a1ac7dcb375e2fd021b441575ce86b4d7edf2c
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

For the existing SoCs we support, we use SEPARATE_NOBITS_REGION, to move
some parts of the data into separate memory regions (to save on the SRAM
A2 we are loaded into).
For the upcoming H616 platform this is of no concern (we run in DRAM),
so make this flag a platform choice instead.

Change-Id: Ic01d49578c6274660f8f112bd23680d3eca3be7a
Signed-off-by: Andre Przywara <andre.przywara@arm.com>