GitLab

This implementation is no longer deprecated.

Change-Id: I68552d0fd5ba9f08fad4345e4657e8e3c5362a36
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Permit unaligned accesses while executing the secure partition
payload, so that we don't have to modify existing code that we
will host there. (The UEFI spec explicitly permits unaligned
accesses)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Expose the timer registers that are accessible at EL0 per the
architecture to the SPM payload running in secure EL0. Note
that this requires NS_TIMER_SWITCH to be enable for all users
of this code.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Update some asserts that refer to #defines that only occur in
ARM platforms, preventing this code to be used on other platforms.
Instead, use a platform agnostic name, and update all the existing
users.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca339

 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Rename files prefixed by sp_ to spm_.

Change-Id: Ie3016a4c4ac5987fe6fdd734c6b470c60954e23d
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The current SPM is a prototype that only supports one secure partition
in EL0. The objective of SPM is to have multiple partitions. The current
MM interface isn't adequate for this, so it is needed to modify heavily
the code to add proper support for it.

However, there are platforms which are already using this (like SGI) and
removing the code would break it.  For this reason, the current SPM code
has been duplicated in order to temporarily preserve compatibility. All
new improvements/changes to SPM will be done in the non-deprecated copy,
that may change without notice.

The new build option SPM_DEPRECATED has been introduced to select the SPM
implementation. It defaults to 1, that selects the deprecated SPM.

Change-Id: Ic9f80b53b450e97b4d3f47e4ef4a138ee8d87443
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Instead of having a different initialization routine than the rest of
the codebase, use the common implementation.

Change-Id: I27c03b9905f3cf0af8810aad9e43092005387a1a
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The function xlat_arch_is_granule_size_supported() can be used to check
if a specific granule size is supported. In Armv8, AArch32 only supports
4 KiB pages. AArch64 supports 4 KiB, 16 KiB or 64 KiB depending on the
implementation, which is detected at runtime.

The function xlat_arch_get_max_supported_granule_size() returns the max
granule size supported by the implementation.

Even though right now they are only used by SPM, they may be useful in
other places in the future. This patch moves the code currently in SPM
to the xlat tables lib so that it can be reused.

Change-Id: If54624a5ecf20b9b9b7f38861b56383a03bbc8a4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

In the context management library, cm_setup_context() takes the
information in ep_info to fill the registers x0-x7. This patch replaces
the current code that sets them manually by the correct initialization
code.

Change-Id: Id1fdf4681b154026c2e3af1f9b05b19582b7d16d
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The current internal names are too long, which makes it hard to write
code as many lines overflow the limit and need to be split, which may
not help the reader.

Change-Id: I072bdc8f3dd125255063ffa7f02500e5228fc9a1
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Move all information related to a Secure Partition to the struct
secure_partition_context_t.

This requires an in-depth refactor because most of the previous code of
SPM relied on global information.

Change-Id: I0a23e93817dcc191ce1d7506b8bc671d376123c4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This allows secure partitions to access these registers. This is
needed in some cases. For example, it has been reported that in order
to implement secure storage services, a secure partition needs to
encrypt/decrypt some authentication variables, which requires FP/SIMD
support.

Note that SPM will not do any saving/restoring of these registers on
behalf of the SP. This falls under the SP's responsibility.

Also note that if the SP gets preempted, it might not get a chance to
save/restore FP/SIMD registers first. This patch does not address this
problem. It only serves as a temporary solution to unblock development
on the secure partition side.

Change-Id: I3b8ccdebdac0219f6ac96ad66ab2be0be8374ad3
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

After executing a TLBI a DSB is needed to ensure completion of the
TLBI.

rk3328: The MMU is allowed to load TLB entries for as long as it is
enabled. Because of this, the correct place to execute a TLBI is right
after disabling the MMU.

Change-Id: I8280f248d10b49a8c354a4ccbdc8f8345ac4c170
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

A new platform define, `PLAT_SP_IMAGE_XLAT_SECTION_NAME`, has been
introduced to select the section where the translation tables used by
the S-EL1/S-EL0 are placed.

This define has been used to move the translation tables to DRAM secured
by TrustZone.

Most of the extra needed space in BL31 when SPM is enabled is due to the
large size of the translation tables. By moving them to this memory
region we can save 44 KiB.

A new argument has been added to REGISTER_XLAT_CONTEXT2() to specify the
region where the translation tables have to be placed by the linker.

Change-Id: Ia81709b4227cb8c92601f0caf258f624c0467719
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Common code mustn't include ARM platforms headers.

Change-Id: Ib6e4f5a77c2d095e6e8c3ad89c89cb1959cd3043
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The code was incorrectly reading from ID_AA64PRF0_EL1 instead of
ID_AA64MMFR0_EL1 causing the supported granularity sizes returned by the
code to be wrong.

This wasn't causing any problem because it's just used to check the
alignment of the base of the buffer shared between Non-secure and Secure
worlds, and it was aligned to more than 64 KiB, which is the maximum
granularity supported by the architecture.

Change-Id: Icc0d949d9521cc0ef13afb753825c475ea62d462
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The MP info struct is placed right after the boot info struct. However,
when calculating the address of the MP info, the size of the boot info
struct was being multiplied by the size of the MP boot info. This left
a big gap of empty space between the structs.

This didn't break any code because the boot info struct has a pointer to
the MP info struct. It was just wasting space.

Change-Id: I1668e3540d9173261968f6740623549000bd48db
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

A Secure Partition is a software execution environment instantiated in
S-EL0 that can be used to implement simple management and security
services. Since S-EL0 is an unprivileged exception level, a Secure
Partition relies on privileged firmware e.g. ARM Trusted Firmware to be
granted access to system and processor resources. Essentially, it is a
software sandbox that runs under the control of privileged software in
the Secure World and accesses the following system resources:

- Memory and device regions in the system address map.
- PE system registers.
- A range of asynchronous exceptions e.g. interrupts.
- A range of synchronous exceptions e.g. SMC function identifiers.

A Secure Partition enables privileged firmware to implement only the
absolutely essential secure services in EL3 and instantiate the rest in
a partition. Since the partition executes in S-EL0, its implementation
cannot be overly complex.

The component in ARM Trusted Firmware responsible for managing a Secure
Partition is called the Secure Partition Manager (SPM). The SPM is
responsible for the following:

- Validating and allocating resources requested by a Secure Partition.
- Implementing a well defined interface that is used for initialising a
  Secure Partition.
- Implementing a well defined interface that is used by the normal world
  and other secure services for accessing the services exported by a
  Secure Partition.
- Implementing a well defined interface that is used by a Secure
  Partition to fulfil service requests.
- Instantiating the software execution environment required by a Secure
  Partition to fulfil a service request.

Change-Id: I6f7862d6bba8732db5b73f54e789d717a35e802f
Co-authored-by: Douglas Raillard <douglas.raillard@arm.com>
Co-authored-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Co-authored-by: Achin Gupta <achin.gupta@arm.com>
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>