GitLab

Instead of having a single version of the MMU setup functions for all
bootloader images that can execute either in EL3 or in EL1, provide
separate functions for EL1 and EL3. Each bootloader image can then
call the appropriate version of these functions. The aim is to reduce
the amount of code compiled in each BL image by embedding only what's
needed (e.g. BL1 to embed only EL3 variants).

Change-Id: Ib86831d5450cf778ae78c9c1f7553fe91274c2fa

Previously exception handlers in BL3-1, X19-X29 were not saved
and restored on every SMC/trap into EL3. Instead these registers
were 'saved as needed' as a side effect of the A64 ABI used by the C
compiler.

That approach failed when world switching but was not visible
with the TSP/TSPD code because the TSP is 64-bit, did not
clobber these registers when running and did not support pre-emption
by normal world interrupts. These scenarios showed
that the values in these registers can be passed through a world
switch, which broke the normal and trusted world assumptions
about these registers being preserved.

The Ideal solution saves and restores these registers when a
world switch occurs - but that type of implementation is more complex.
So this patch always saves and restores these registers on entry and
exit of EL3.

Fixes ARM-software/tf-issues#141

Change-Id: I9a727167bbc594454e81cf78a97ca899dfb11c27

Instead of using the system register helper functions to read
or write system registers, assembler coded functions should
use MRS/MSR instructions. This results in faster and more
compact code.

This change replaces all usage of the helper functions with
direct register accesses.

Change-Id: I791d5f11f257010bb3e6a72c6c5ab8779f1982b3

The current code does not always use data and instruction
barriers as required by the architecture and frequently uses
barriers excessively due to their inclusion in all of the
write_*() helper functions.

Barriers should be used explicitly in assembler or C code
when modifying processor state that requires the barriers in
order to enable review of correctness of the code.

This patch removes the barriers from the helper functions and
introduces them as necessary elsewhere in the code.

PORTING NOTE: check any port of Trusted Firmware for use of
system register helper functions for reliance on the previous
barrier behaviour and add explicit barriers as necessary.

Fixes ARM-software/tf-issues#92

Change-Id: Ie63e187404ff10e0bdcb39292dd9066cb84c53bf

Update code base to remove variables from the .data section,
mainly by using const static data where possible and adding
the const specifier as required. Most changes are to the IO
subsystem, including the framework APIs. The FVP power
management code is also affected.

Delay initialization of the global static variable,
next_image_type in bl31_main.c, until it is realy needed.
Doing this moves the variable from the .data to the .bss
section.

Also review the IO interface for inconsistencies, using
uintptr_t where possible instead of void *. Remove the
io_handle and io_dev_handle typedefs, which were
unnecessary, replacing instances with uintptr_t.

Fixes ARM-software/tf-issues#107.

Change-Id: I085a62197c82410b566e4698e5590063563ed304

Reduce the number of header files included from other header
files as much as possible without splitting the files. Use forward
declarations where possible. This allows removal of some unnecessary
"#ifndef __ASSEMBLY__" statements.

Also, review the .c and .S files for which header files really need
including and reorder the #include statements alphabetically.

Fixes ARM-software/tf-issues#31

Change-Id: Iec92fb976334c77453e010b60bcf56f3be72bd3e

Add tag names to all unnamed structs in header files. This
allows forward declaration of structs, which is necessary to
reduce header file nesting (to be implemented in a subsequent
commit).

Also change the typedef names across the codebase to use the _t
suffix to be more conformant with the Linux coding style. The
coding style actually prefers us not to use typedefs at all but
this is considered a step too far for Trusted Firmware.

Also change the IO framework structs defintions to use typedef'd
structs to be consistent with the rest of the codebase.

Change-Id: I722b2c86fc0d92e4da3b15e5cab20373dd26786f

Move the PSCI global functions out of psci_private.h and into
psci.h to allow the standard service to only depend on psci.h.

Change-Id: I8306924a3814b46e70c1dcc12524c7aefe06eed1

Move the BL function prototypes out of arch.h and into the
appropriate header files to allow more efficient header file
inclusion. Create new BL private header files where there is no
sensible existing header file.

Change-Id: I45f3e10b72b5d835254a6f25a5e47cf4cfb274c3

Separate out the CASSERT macro out of bl_common.h into its own
header to allow more efficient header inclusion.

Change-Id: I291be0b6b8f9879645e839a8f0dd1ec9b3db9639

Remove all usage of the vpath keyword in makefiles as it was prone
to mistakes. Specify the relative paths to source files instead.

Also reorder source files in makefiles alphabetically.

Fixes ARM-software/tf-issues#121

Change-Id: Id15f60655444bae60e0e2165259efac71a50928b

Make codebase consistent in its use of #include "" syntax for
user includes and #include <> syntax for system includes.

Fixes ARM-software/tf-issues#65

Change-Id: If2f7c4885173b1fd05ac2cde5f1c8a07000c7a33

Move almost all system include files to a logical sub-directory
under ./include. The only remaining system include directories
not under ./include are specific to the platform. Move the
corresponding source files to match the include directory
structure.

Also remove pm.h as it is no longer used.

Change-Id: Ie5ea6368ec5fad459f3e8a802ad129135527f0b3

This patch saves the 'power_state' parameter prior to suspending
a cpu and invalidates it upon its resumption. The 'affinity level'
and 'state id' fields of this parameter can be read using a set of
public and private apis. Validation of power state parameter is
introduced which checks for SBZ bits are zero.
This change also takes care of flushing the parameter from the cache
to main memory. This ensures that it is available after cpu reset
when the caches and mmu are turned off. The earlier support for
saving only the 'affinity level' field of the 'power_state' parameter
has also been reworked.

Fixes ARM-Software/tf-issues#26
Fixes ARM-Software/tf-issues#130

Change-Id: Ic007ccb5e39bf01e0b67390565d3b4be33f5960a

This extends the --gc-sections behaviour to the many assembler
support functions in the firmware images by placing each function
into its own code section. This is achieved by creating a 'func'
macro used to declare each function label.

Fixes ARM-software/tf-issues#80

Change-Id: I301937b630add292d2dec6d2561a7fcfa6fec690

This patch fixes a build failure when TSPD support is included. The failure was
due to a missing semi-colon at the end of a C statement in tspd_common.c

Change-Id: I8fbd0d500bd9145b15f862b8686e570b80fcce8c

This patch fixes a regression failure due to the use of functions by the 
TSPD code which access system registers with partially qualified names. 
These functions had been removed in an earlier patch. The relevant code 
has been updated to access these registers with their fully qualified 
names.

Fixes ARM-software/tf-issues#119

Change-Id: Ide1bc5036e1b8164a42f7b7fe86186ad860e0ef9

This patch adds support in the generic PSCI implementation to call a
platform specific function to enter a standby state using an example
implementation in ARM FVP port

Fixes ARM-software/tf-issues#94
Change-Id: Ic1263fcf25f28e09162ad29dca954125f9aa8cc9

Each ARM Trusted Firmware image should know in which EL it is running
and it should use the corresponding register directly instead of reading
currentEL and knowing which asm register to read/write

Change-Id: Ief35630190b6f07c8fbb7ba6cb20db308f002945

This patch adds call count, UID and version information SMC calls for
the Trusted OS, as specified by the SMC calling convention.

Change-Id: I9a3e84ac1bb046051db975d853dcbe9612aba6a9

This patch implements ARM Standard Service as a runtime service and adds
support for call count, UID and revision information SMCs. The existing
PSCI implementation is subsumed by the Standard Service calls and all
PSCI calls are therefore dispatched by the Standard Service to the PSCI
handler.

At present, PSCI is the only specification under Standard Service. Thus
call count returns the number of PSCI calls implemented. As this is the
initial implementation, a revision number of 0.1 is returned for call
revision.

Fixes ARM-software/tf-issues#62

Change-Id: I6d4273f72ad6502636efa0f872e288b191a64bc1

This change requires all platforms to now specify a list of source files
rather than object files.

New source files should preferably be specified by using the path as
well and we should add this in the future for all files so we can remove
use of vpath. This is desirable because vpath hides issues like the fact
that BL2 currently pulls in a BL1 file bl1/aarch64/early_exceptions.S
and if in the future we added bl2/aarch64/early_exceptions.S then it's
likely only one of the two version would be used for both bootloaders.

This change also removes the 'dump' build target and simply gets
bootloaders to always generate a dump file. At the same time the -x
option is added so the section headers and symbols table are listed.

Fixes ARM-software/tf-issues#11

Change-Id: Ie38f7be76fed95756c8576cf3f3ea3b7015a18dc
Signed-off-by: Jon Medhurst <tixy@linaro.org>

At present SPD power management hooks and BL3-2 entry are implemented
using weak references. This would have the handlers bound and registered
with the core framework at build time, but leaves them dangling if a
service fails to initialize at runtime.

This patch replaces implementation by requiring runtime handlers to
register power management and deferred initialization hooks with the
core framework at runtime. The runtime services are to register the
hooks only as the last step, after having all states successfully
initialized.

Change-Id: Ibe788a2a381ef39aec1d4af5ba02376e67269782

This patch reworks the service provided by the TSP to perform common
arithmetic operations on a set of arguments provided by the non-secure
world. For a addition, division, subtraction & multiplication operation
requested on two arguments in x0 and x1 the steps are:

1. TSPD saves the non-secure context and passes the operation and its
   arguments to the TSP.

2. TSP asks the TSPD to return the same arguments once again. This
   exercises an additional SMC path.

3. TSP now has two copies of both x0 and x1. It performs the operation
   on the corresponding copies i.e. in case of addition it returns x0+x0
   and x1+x1.

4. TSPD receives the result, saves the secure context, restores the
   non-secure context and passes the result back to the non-secure
   client.

Change-Id: I6eebfa2ae0a6f28b1d2e11a31f575c7a4b96724b
Co-authored-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

This patch implements a set of handlers in the SPD which are called by
the PSCI runtime service upon receiving a power management
operation. These handlers in turn pass control to the Secure Payload
image if required before returning control to PSCI. This ensures that
the Secure Payload has complete visibility of all power transitions in
the system and can prepare accordingly.

Change-Id: I2d1dba5629b7cf2d53999d39fe807dfcf3f62fe2

This patch adds the TSPD service which is responsible for managing
communication between the non-secure state and the Test Secure Payload
(TSP) executing in S-EL1.

The TSPD does the following:

1. Determines the location of the TSP (BL3-2) image and passes control
   to it for initialization. This is done by exporting the 'bl32_init()'
   function.

2. Receives a structure containing the various entry points into the TSP
   image as a response to being initialized. The TSPD uses this
   information to determine how the TSP should be entered depending on
   the type of operation.

3. Implements a synchronous mechanism for entering into and returning
   from the TSP image. This mechanism saves the current C runtime
   context on top of the current stack and jumps to the TSP through an
   ERET instruction. The TSP issues an SMC to indicate completion of the
   previous request. The TSPD restores the saved C runtime context and
   resumes TSP execution.

This patch also introduces a Make variable 'SPD' to choose the specific
SPD to include in the build. By default, no SPDs are included in the
build.

Change-Id: I124da5695cdc510999b859a1bf007f4d049e04f3
Co-authored-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

This patch creates a 'services' directory and moves the PSCI under
it. Other runtime services e.g. the Secure Payload Dispatcher service
will be placed under the same directory in the future.

Also fixes issue ARM-software/tf-issues#12

Change-Id: I187f83dcb660b728f82155d91882e961d2255068