GitLab

Update build manual
- remove irrelevant platforms and environemnt variables
- add links to BLE and mv_ddr Github repositories

Change-Id: Ie389c61f014751cdc0459b3f78c70ede694d27b8
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

maintainers: Update maintainer for sgi/sgm platforms

K3 PSCI Support

maintainers: add drivers folders for STM32MP1

Remove unnecessary casts

DSU erratum 936184 workaround: bug fix

plat: marvell: bl31: Update the early platform setup API

Folders drivers/st/ and include/drivers/st/ are added in maintainers.rst,
under STM32MP1 platform port.
This will allow notifications for the files modified there.
Signed-off-by: Yann Gautier <yann.gautier@st.com>

The initial implementation was corrupting registers that it shouldn't.
Now this is fixed.

Change-Id: Iaa407c18e668b2d9381391bf10d6876fe936aded
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

Small patch which removes some redundant casts to (void *).

Change-Id: If1cfd68f2989bac1d39dbb3d1c31d4119badbc21
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

Use TI-SCI messages to request reset from system controller firmware.
Signed-off-by: Andrew F. Davis <afd@ti.com>

Use TI-SCI messages to request core start from system controller
firmware.
Signed-off-by: Andrew F. Davis <afd@ti.com>

TI-SCI message protocol provides support for controlling of various
physical cores available in the SoC. In order to control which host is
capable of controlling a physical processor core, there is a processor
access control list that needs to be populated as part of the board
configuration data.

Introduce support for the set of TI-SCI message protocol APIs that
provide us with this capability of controlling physical cores.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>

Since system controller now has control over SoC power management, core
operation such as reset need to be explicitly requested to reboot the SoC.
Add support for this here.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>

TI-SCI message protocol provides support for management of various
hardware entities within the SoC.

In general, we expect to function at a device level of abstraction,
however, for proper operation of hardware blocks, many clocks directly
supplying the hardware block needs to be queried or configured.

Introduce support for the set of TI-SCI message protocol support that
provide us with this capability.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>

TI-SCI message protocol provides support for management of various
hardware entitites within the SoC.

We introduce the fundamental device management capability support to
the driver protocol as part of this change.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>

Texas Instrument's System Control Interface (TI-SCI) Message Protocol
is used in Texas Instrument's System on Chip (SoC) such as those
in K3 family AM654x SoCs to communicate between various compute
processors with a central system controller entity.

TI-SCI message protocol provides support for management of various
hardware entities within the SoC. Add support driver to allow
communication with system controller entity within the SoC.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>

Secure Proxy module manages hardware threads that are meant
for communication between the processor entities. Add support
for this here.
Signed-off-by: Andrew F. Davis <afd@ti.com>

libc: Cleanup library

armclang replaces calls to printf by calls to one of the symbols
__0printf, __1printf or __2printf. This patch adds new functions with
these names that internally call printf so that the Trusted Firmware can
be compiled with this compiler.

Change-Id: I06a0e3e5001232fe5b2577615666ddd66e81eef0
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

tf_printf and tf_snprintf are now called printf and snprintf, so the
code needs to be updated.

Change-Id: Iffeee97afcd6328c4c2d30830d4923b964682d71
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change their names to printf and snprintf. They are much smaller than
the previous versions we had, which makes them better suited for the
Trusted Firmware.

Change-Id: Ia872af91b7b967c47fce012eccecede7873a3daf
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The C standard says that printf() has to return the number of characters
it has printed.

Change-Id: I0ef50b1d6766d140724ac0a2fa2c5d023431f984
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The codebase was using non-standard headers. It is needed to replace
them by the correct ones so that we can use the new libc headers.

Change-Id: I530f71d9510cb036e69fe79823c8230afe890b9d
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Only leave the parts relevant to the Trusted Firmware.

Change-Id: I0444c16e402f6c1629211d03bf6cb32ca3dbcf59
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: I4f58bb4660078c9bc76d2826c90b2fa711719a3e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Taken from http://git.simple-cc.org/scc/

 from the following commit:

67508ad14af314cea2229783d3c084f28c41daf0

Permission has been granted from the author to use them under the
license BSD-3-Clause instead of ISC.

Change-Id: I65c0ce3ab60c49d34a57533af12a74bd7bde88e5
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Remove code specific to FreeBSD so that they can be used in this
repository.

Change-Id: I5c11eb5b3c05a7fb91aed08371a1f7a0e6122a94
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

From commit aafd1cf4235d78ce85b76d7da63e9589039344b3:

- sys/sys/endian.h
- sys/arm/include/endian.h
- sys/arm64/include/endian.h
- sys/sys/errno.h
- lib/libc/strchr.c
- lib/libc/strcmp.c
- lib/libc/strncmp.c
- lib/libc/strnlen.c

strcasecmp() hasn't been imported.

Change-Id: I8a0787aec9ba8960a008fb5c66f7a73c84919b93
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: I76091d52571f1950111c4b1670d5fc3883607715
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The existing files had some style problems that this patch fixes.

Change-Id: I794e0d96e52f8da0ffa0d70a41f36c4432b4e563
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

They are too big for the Trusted Firmware, and it can be confusing to
have two versions of the same functions with different names. tf_printf
and tf_snprintf will replace them in the next patch.

Change-Id: I978414ac169cc3156e249549ef101a70eb31a295
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

sscanf() is unused and it doesn't work, so it doesn't make sense to
keep it.

timingsafe_bcmp() isn't used anywhere.

Change-Id: Ib5d28ff21d0f3ccc36c5c0fb5474b3384105cf80
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Remove all files that don't have only Arm copyright. This is the first
step to cleanup the C library in this repository. They will be re-added
in the following patches.

Change-Id: I72c40a1620d1df3228fc397ec695d569a20245fd
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

MISRA fixes

AArch64: Enable MPAM for lower ELs

rpi3: Migrate from deprecated APIs

memprotect: Move files to specific platform makefiles

All the arm platforms were including the files related to
mem-protect. This configuration generates some problems
with new platforms that don't support such functionality,
and for that reason this patch moves these files to the
platform specific makefiles.

Change-Id: I6923e5224668b76667795d8e11723cede7979b1e
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>