GitLab

The intention of this patch is to leverage the existing el3_exit() return
routine for smc_unknown return path rather than a custom set of instructions.
In order to leverage el3_exit(), the necessary counteraction (i.e., saving the
system registers apart from GP registers) must be performed. Hence a series of
instructions which save system registers( like SPSR_EL3, SCR_EL3 etc) to stack
are moved to the top of group of instructions which essentially decode the OEN
from the smc function identifier and obtain the specific service handler in
rt_svc_descs_array. This ensures that the control flow for both known and
unknown smc calls will be similar.

Change-Id: I67f94cfcba176bf8aee1a446fb58a4e383905a87
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Change-Id: I33c1bf49aa10867e1a2ca4c167112b99bf756dda
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

* changes:
  N1SDP: Initialise CNTFRQ in Non Secure CNTBaseN
  N1SDP: Fix DRAM2 start address
  Add option for defining platform DRAM2 base
  Disable speculative loads only if SSBS is supported

N1SDP exhibits the behavior similar to Juno wherein CNTBaseN.CNTFRQ
can be written but does not reflect the value of the CNTFRQ register
in CNTCTLBase frame. This doesn't follow ARM ARM in that the value
updated in CNTCTLBase.CNTFRQ is not reflected in CNTBaseN.CNTFRQ.

Hence enable the workaround (applied to Juno) for N1SDP that updates
the CNTFRQ register in the Non Secure CNTBaseN frame.

Change-Id: Id89ee1bca0f25c9d62f8f794f2c4f4e618cdf092
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>

The default DRAM2 start address for Arm platforms
is 0x880000000. However, for N1SDP platform this is
0x8080000000.

Fix the DRAM2 start address by initialising
PLAT_ARM_DRAM2_BASE.

Without this fix there is a mismatch of the System
memory region view as seen by the BL31 runtime
firmware (PSCI) versus the view of the OS (which
is based on the description provided by UEFI. In
this case UEFI is correctly describing the DRAM2
start address).

This implicates in secondary cores failing to start
on some Operating Systems if the OS decides to place
the secondary start address in the mismatched region.

Change-Id: I57220e753219353dda429868b4c5e1a69944cc64
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>

The default DRAM2 base address for Arm platforms
is 0x880000000. However, on some platforms the
firmware may want to move the start address to
a different value.

To support this introduce PLAT_ARM_DRAM2_BASE that
defaults to 0x880000000; but can be overridden by
a platform (e.g. in platform_def.h).

Change-Id: I0d81195e06070bc98f376444b48ada2db1666e28
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>

Examine the ID_AA64PFR1_EL1 bits 7:4 to see if speculative
loads (SSBS) is implemented, before disabling speculative
loads.

Change-Id: I7607c45ed2889260d22a94f6fd9af804520acf67
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>

We've seen issues with some THG based UFS chips, where
after reset the LUNs don't always enumerate properly.

After some debugging, we found that extending the mdelay
here seems to resolve the issue by giving the chips enough
time to complete reset.

Change-Id: I848f810b2438ed6ad3d33db614c61d2cef9ac400
Signed-off-by: John Stultz <john.stultz@linaro.org>

Remove duplicated linker symbols, resue the symbols
defined in bl_common.h

Change-Id: I10de450eccc78c09b61a8ae7126bf4f4029fa682
Signed-off-by: Jacky Bai <ping.bai@nxp.com>

This patch removes .arch "arm8.1-a" and "armv8-a"
directives which overwrite ASFLAGS_aarch64 option based
on ARM_ARCH_MINOR passed to Makefile and cause
translation errors like
"selected processor does not support `bti jc'"
for armv8.5-a targets when BTI support is enabled.

Change-Id: Idca5b66ed1e5d86e2188b0c0f16c3819990957c4
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

For security DMA should be blocked at the SMMU by default
unless explicitly enabled for a device. SMMU is disabled
after reset with all streams bypassing the SMMU, and
abortion of all incoming transactions implements a default
deny policy on reset.
This patch also moves "bl1_platform_setup()" function from
arm_bl1_setup.c to FVP platforms' fvp_bl1_setup.c and
fvp_ve_bl1_setup.c files.

Change-Id: Ie0ffedc10219b1b884eb8af625bd4b6753749b1a
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

- Add basic platform setup
- Add generic CPU helper functions
- Add delay timer platform implementation
- Use TI 16550 uart driver

Change-Id: I1c29569c68fe9fca5e10e88a22a29690bab7141f
Signed-off-by: kenny liang <kenny.liang@mediatek.com>

The IMX_SIP_BUILDINFO call was implemented for imx8qm and imx8qx but
it's also applicable to imx8m.

This fixes U-Boot not printing commit hash on 8m with upstream TF-A.

Change-Id: Idcfd9729eaaccf329c24e241da325f1f6cd3c880
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

I'm giving full maintainership of the Raspberry Pi 3 platform port to
Paul. I'm also leaving the GXBB maintainership to Andre, who is also
happy to pass it on to someone else who is more interested in it.

Change-Id: Ieb2212f5fc11ebde9fc0c857e9e305d691d4ee3f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Pointer authentication is supported only in AArch64. A relevant check is
added for that in the Makefile.

Change-Id: I021ba65a9bd5764fd33292bee42617015e04a870
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

* changes:
  plat: imx8mq: Only keep IRQ 32 unmasked
  plat: imx8mq: gpc: Enable all power domain by default

1) One space was missing from the indentation and, hence, rendering error
was generated in the user guide.
2) Partially reword Pointer Authentication related info.

Change-Id: Id5e65d419ec51dd7764f24d1b96b6c9942d63ba4
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

Only IRQ 32 (SPI 0) needs to be kept unmasked, not everything divisible
by 32.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Change-Id: I286b925eead89218cfeddd82f53a634f3447d212

This is similar to imx8mm and allows uboot to run fastboot over USB otg.

There is a different set of power domains on 8mq but same bits covers
all off them.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Change-Id: I1151c2bc2d32b1e02b4db16285b3d30cabc0d64d

* changes:
  Workaround for cortex-A76 errata 1286807
  Cortex-A76: workarounds for errata 1257314, 1262606, 1262888, 1275112

The workaround for Cortex-A76 errata #1286807 is implemented
in this patch.

Change-Id: I6c15af962ac99ce223e009f6d299cefb41043bed
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

The workarounds for errata 1257314, 1262606, 1262888 and 1275112 are
added to the Cortex-A76 cpu specific file. The workarounds are disabled
by default and have to be explicitly enabled by the platform integrator.

Change-Id: I70474927374cb67725f829d159ddde9ac4edc343
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This patch fixes this issue:
https://github.com/ARM-software/tf-issues/issues/660



The introduced changes are the following:

1) Some cores implement cache coherency maintenance operation on the
hardware level. For those cores, such as - but not only - the DynamIQ
cores, it is mandatory that TF-A is compiled with the
HW_ASSISTED_COHERENCY flag. If not, the core behaviour at runtime is
unpredictable. To prevent this, compile time checks have been added and
compilation errors are generated, if needed.

2) To enable this change for FVP, a logical separation has been done for
the core libraries. A system cannot contain cores of both groups, i.e.
cores that manage coherency on hardware and cores that don't do it. As
such, depending on the HW_ASSISTED_COHERENCY flag, FVP includes the
libraries only of the relevant cores.

3) The neoverse_e1.S file has been added to the FVP sources.

Change-Id: I787d15819b2add4ec0d238249e04bf0497dc12f3
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

This patch is a preparation for the subsequent changes in
SMMUv3 driver. It introduces a new "smmuv3_poll" function
and replaces inline functions for accessing SMMU registers
with mmio read/write operations. Also the infinite loop
for the poll has been replaced with a counter based timeout.

Change-Id: I7a0547beb1509601f253e126b1a7a6ab3b0307e7
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

* changes:
  rockchip: Disable binary generation for all SoCs.
  build_macros: Add mechanism to prevent bin generation.

All supported Rockchip SoCs (RK3288, RK3328, RK3368 and RK3399)
have non-continuous memory areas in the linker script with a huge
gap between them. This results in extremely padded binary images
with a size of about 4 GiB.

E.g. on the RK3399 we have the following memory areas (and base addresses):
RAM (0x1000), SRAM (0xFF8C0000), and PMUSRAM (0xFF3B0000).

Consumers of the TF-A project (e.g. coreboot or U-Boot) therefore
use the ELF image instead, which has a size of a few hundred kBs.

In order to prevent the generation of a huge and useless file,
this patch disables the binary generation for all affected Rockchip
SoCs.
Signed-off-by: Christoph Müllner <christophm30@gmail.com>
Change-Id: I4ac65bdf1e598c3e1a59507897d183aee9a36916

On certain platforms it does not make sense to generate
TF-A binary images. For example a platform could make use of serveral
memory areas, which are non-continuous and the resulting binary
therefore would suffer from the padding-bytes.
Typically these platforms use the ELF image.

This patch introduces a variable DISABLE_BIN_GENERATION, which
can be set to '1' in the platform makefile to prevent the binary
generation.
Signed-off-by: Christoph Müllner <christophm30@gmail.com>
Change-Id: I62948e88bab685bb055fe6167d9660d14e604462