GitLab

This patch organizes the platform memory/mmio map, so that the base
addresses for the apertures line up in ascending order. This makes
it easier for the xlat_tables_v2 library to create mappings for each
mmap_add_region call.

Change-Id: Ie1938ba043820625c9fea904009a3d2ccd29f7b3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

PCIE0R1 does not program stream IDs, so allow the stream ID to be
overriden by the MC.

Change-Id: I4dbd71e1ce24b11e646de421ef68c762818c2667
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

The previous bootloader is not able to pass boot params wider than
32-bits due to an oversight in the scratch register being used. A
new secure scratch register #75 has been assigned to pass the higher
bits.

This patch adds support to parse the higher bits from scratch #75
and use them in calculating the base address for the location of
the boot params.

Scratch #75 format
====================
31:16 - bl31_plat_params high address
15:0 - bl31_params high address

Change-Id: Id53c45f70a9cb370c776ed7c82ad3f2258576a80
Signed-off-by: Steven Kao <skao@nvidia.com>

HW bug in third party PCIE IP - PCIE datapath hangs when there are
more than 28 outstanding requests on data backbone for x1 controller.

Suggested SW WAR is to limit reorder_depth_limit to 16 for
PCIE 1W/2AW/3W clients.

Change-Id: Id5448251c35d2a93f66a8b5835ae4044f5cef067
Signed-off-by: Puneet Saxena <puneets@nvidia.com>

-PTCR is ISO client so setting it to FORCE_NON_COHERENT.
-MPCORER, MPCOREW and MIU0R/W to MIU7R/W clients itself will provide
ordering so no need to override from mc.
-MIU0R/W to MIU7R/W clients registers are not implemented in tegrasim
so skipping it for simulation.
-All the clients need to set CGID_TAG_ADR to maintain request ordering
within a 4K boundary.

Change-Id: Iaa3189a1f3e40fb4cef28be36bc4baeb5ac8f9ca
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

- All SoC clients should use CGID_TAG_ADR to improve perf
- Remove tegra194_txn_override_cfgs array that is not getting used.

Change-Id: I9130ef5ae8659ed5f9d843ab9a0ecf58b5ce9c74
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>

Memory clients are divided in to ISO/NonISO/Order/Unordered/Low
BW/High BW. Based on the client types, HW team recommends, different
memory ordering settings, IO coherency settings and SMMU register settings
for optimized performance of the MC clients.

For example ordered ISO clients should be set as strongly ordered and
should bypass SCF and directly access MC hence set as
FORCE_NON_COHERENT. Like this there are multiple recommendations
for all of the MC clients.

This change sets all these MC registers as per HW spec file.

Change-Id: I8a8a0887cd86bf6fe8ac7835df6c888855738cd9
Signed-off-by: Puneet Saxena <puneets@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

Due to a hardware bug PVA may perform memory transactions which
cause coalescer faults. This change works around the issue by
disabling coalescer for PVA0RDC and PVA1RDC.

Change-Id: I27d1f6e7bc819fb303dae98079d9277fa346a1d3
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>

Force memory transactions from seswr and sesrd as coherent_snoop from
no-override. This is necessary as niso clients should use coherent
path.

Presently its set as FORCE_COHERENT_SNOOP. Once SE+TZ is enabled
with SMMU, this needs to be replaced by FORCE_COHERENT.

Change-Id: I8b50722de743b9028129b4715769ef93deab73b5
Signed-off-by: Puneet Saxena <puneets@nvidia.com>

- SC7 requires all the cluster groups to be in CG7 state, else
  is_sc7_allowed will get denied
- As a WAR while requesting CC6, request CG7 as well
- CG7 request will not be honored if it is not last core in Cluster
  group
- This is just to satisfy MCE for now as CG7 is going to be defeatured

Change-Id: Ibf2f8a365a2e46bd427abd563da772b6b618350f
Signed-off-by: Vignesh Radhakrishnan <vigneshr@nvidia.com>

This patch adds support to toggle SE clock, using the bpmp_ipc
interface, to enable SE context save/restore. The SE sequence mostly
gets called during System Suspend/Resume.

Change-Id: I9cee12a9e14861d5e3c8c4f18b4d7f898b6ebfa7
Signed-off-by: steven kao <skao@nvidia.com>

This patch fixes the header file paths to include debug.h
from the right location.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: If303792d2169158f436ae6aa5b6d7a4f88e28f7b

This reverts commit d433bbdd.

Change-Id: I46c69dce704a1ce1b50452dd4d62425c4a67f7f0

Setting errata workarounds for N1 1043202 and 1315703 to 0 since
they should be turned off by default.
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I116673a4ddcf64436e90d70133f035a133989ed9

Out of two possible implementation of Secure Partition Manager(SPM)
currently only Management mode (MM) design is supported and the support
for SPM based on SPCI Alpha 1 prototype has been removed.

Earlier both implementation used common build flag "ENABLE_SPM" but it
has since been decoupled and MM uses a separate build FLAG "SPM_MM".

Instructions to build it for FVP was still using "ENABLE_SPM", which has
beend corrected in this patch.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I505b98173d6051816436aa602ced6dbec4efc776

This reverts commit 76d84cbc.

Change-Id: I867af7af3d9f5e568101f79b9ebea578e5cb2a4b

* changes:
  plat: xilinx: Move pm_client.h to common directory
  plat: xilinx: versal: Make silicon default build target
  xilinx: versal: Wire silicon default setup
  versal: Increase OCM memory size for DEBUG builds
  plat: xilinx: versal: Dont set IOU switch clock
  arm64: versal: Adjust cpu clock for versal virtual
  xilinx: versal: Add support for PM_GET_OPERATING_CHARACTERISTIC EEMI call
  plat: versal: Add Get_ChipID API
  plat: xilinx: versal: Add load Pdi API support
  xilinx: versal: Add feature check API
  xilinx: versal: Implement set wakeup source for client
  plat: xilinx: versal: Add GET_CALLBACK_DATA function
  xilinx: versal: Add PSCI APIs for system shutdown & reset
  xilinx: versal: Add PSCI APIs for suspend/resume
  xilinx: versal: Remove no_pmc ops to ON power domain
  xilinx: versal: Add set wakeup source API
  xilinx: versal: Add client wakeup API
  xilinx: versal: Add query data API
  xilinx: versal: Add request wakeup API
  xilinx: versal: Add PM_INIT_FINALIZE API for versal
  xilinx: versal: Add support of PM_GET_TRUSTZONE_VERSION API
  xilinx: versal: enable ipi mailbox service
  xilinx: move ipi mailbox svc to xilinx common
  plat: xilinx: versal: Implement PM IOCTL API
  xilinx: versal: Implement power down/restart related EEMI API
  xilinx: versal: Add SMC handler for EEMI API
  xilinx: versal: Implement PLL related PM APIs
  xilinx: versal: Implement clock related PM APIs
  xilinx: versal: Implement pin control related PM APIs
  xilinx: versal: Implement reset related PM APIs
  xilinx: versal: Implement device related PM APIs
  xilinx: versal: Add support for suspend related APIs
  xilinx: versal: Add get_api_version support
  xilinx: Add support to send PM API to PMC using IPI for versal
  plat: xilinx: versal: Move versal_def.h to include directory
  plat: xilinx: versal: Move versal_private.h to include directory
  plat: xilinx: zynqmp: Use GIC framework for warm restart

Moving the FDT helper functions to the common/ directory exposed the file
to MISRA checking, which is mandatory for common code.

Fix the complaints that the test suite reported.

Change-Id: Ica8c8a95218bba5a3fd92a55407de24df58e8476
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

In order to support SEPARATE_NOBITS_REGION for Arm platforms, we need to load
BL31 PROGBITS into secure DRAM space and BL31 NOBITS into SRAM. Hence mandate
the build to require that ARM_BL31_IN_DRAM is enabled as well.

Naturally with SEPARATE_NOBITS_REGION enabled, the BL31 initialization code
cannot be reclaimed to be used for runtime data such as secondary cpu stacks.

Memory map for BL31 NOBITS region also has to be created.

Change-Id: Ibd480f82c1dc74e9cbb54eec07d7a8fecbf25433
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Since BL31 PROGBITS and BL31 NOBITS sections are going to be
in non-adjacent memory regions, potentially far from each other,
some fixes are needed to support it completely.

1. adr instruction only allows computing the effective address
of a location only within 1MB range of the PC. However, adrp
instruction together with an add permits position independent
address of any location with 4GB range of PC.

2. Since BL31 _RW_END_ marks the end of BL31 image, care must be
taken that it is aligned to page size since we map this memory
region in BL31 using xlat_v2 lib utils which mandate alignment of
image size to page granularity.

Change-Id: Ic745c5a130fe4239fa2742142d083b2bdc4e8b85
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

* changes:
  plat: imx: Correct the SGIs that used for secure interrupt
  plat: imx8mm: Add the support for opteed spd on imx8mq/imx8mm

* changes:
  Tegra194: platform handler for entering CPU standby state
  Tegra194: memctrl: force viw and vifalr/w transactions as non-coherent
  Tegra194: memctrl: fix bug in client order id reg value generation
  Tegra194: memctrl: enable mc coalescer
  Tegra194: update scratch registers used to read boot parameters
  Tegra194: implement system shutdown/reset handlers
  Tegra194: mce: support for shutdown and reboot
  Tegra194: request CG7 before checking if SC7 is allowed
  Tegra194: config to enable/disable strict checking mode
  Tegra194: remove unused platform configs
  Tegra194: restore XUSB stream IDs on System Resume

Remove the general BL31 mmap region: it duplicates the existing static
mapping for the entire SRAM region. Use the helper definitions when
applicable to simplify the code and add the MT_EXECUTE_NEVER flag.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: I7a6b79e50e4b5c698774229530dd3d2a89e94a6d

* changes:
  doc: stm32mp1: Update build command line
  fdts: stm32mp1: remove second QSPI flash instance
  stm32mp1: Add support for SPI-NOR boot device
  stm32mp1: Add support for SPI-NAND boot device
  spi: stm32_qspi: Add QSPI support
  fdts: stm32mp1: update for FMC2 pin muxing
  stm32mp1: Add support for raw NAND boot device
  fmc: stm32_fmc2_nand: Add FMC2 driver support
  stm32mp1: Reduce MAX_XLAT_TABLES to 4
  io: stm32image: fix device_size type
  stm32mp: add DT helper for reg by name
  stm32mp1: add compilation flags for boot devices
  lib: utils_def: add CLAMP macro
  compiler_rt: Import popcountdi2.c and popcountsi2.c files
  Add SPI-NOR framework
  Add SPI-NAND framework
  Add SPI-MEM framework
  Add raw NAND framework

Add new flags for storage support that must be used in the build
command line. Add the complete build steps for an OP-TEE configuration.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Change-Id: I0c682f6eb0aab83aa929f4ba734d3151c264aeed