GitLab

On Hikey960 if outputs GPIO176 low level, it can tell PMIC to power off
the whole board.  To avoid resetting the board and stay off, it also
requires the SW2201's three switches 1/2/3 need to be all set to 0.

Since current code doesn't contain complete GPIO modules and misses to
support GPIO176.  This patch adds all known GPIO modules and initialize
GPIO in BL31, and adds system power off callback to use GPIO176 for PMIC
power off operation.

Change-Id: Ia88859b8b7c87c061420ef75f0de3e2768667bb0
Signed-off-by: Leo Yan <leo.yan@linaro.org>

* changes:
  board/rddaniel: intialize tzc400 controllers
  plat/arm/tzc: add support to configure multiple tzc400
  plat/arm: allow boards to specify second DRAM Base address
  plat/arm: allow boards to define PLAT_ARM_TZC_FILTERS

MISRA C-2012 Rule 20.7:
Macro parameter expands into an expression without being wrapped by parentheses.

MISRA C-2012 Rule 12.1:
Missing explicit parentheses on sub-expression.

MISRA C-2012 Rule 18.4:
Essential type of the left hand operand is not the same as that of the right
operand.

Include does not provide any needed symbols.

Change-Id: Ie1c6451cfbc8f519146c28b2cf15c50b1f36adc8
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Cortex-A65x4 and Cortex-A65AEx8 is now included in the list of the
supported Arm Fixed Virtual Platforms.
Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: Ibfcaec11bc75549d60455e96858d79b679e71e5e

Modify RSU driver error code for backward-compatibility with
Linux RSU driver
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ib9e38d4017efe35d3aceeee27dce451fbd429fb5

The MAKE_BL macro is invoked for 1, 2, 2u, 31, 32.

Fix the comments.

Change-Id: I35dd25cc2ea13885c184fb9c8229a322b33f7e71
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

It is needed to make it appear in the table of contents. Right now,
all Amlogic documentation pages appear under the "Platform ports"
section, except the AXG one.

Change-Id: Ibcfc3b156888d2a9574953578978b629e185c708
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Change-Id: I6686f172d0c24f6c457a39cdf4debcbf05475540
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

The dts file now contains a CPU map that precisely describes the
topology including thread nodes. The map was also extended to have 16
PEs to be able to test multithreaded FVPs with 8 cores in the same
cluster.
Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: If39559b05d20bfd68d0ecf830ddcbc5233b288a0

The revision register address will be changed in the next SoC.

The LSI revision is needed in order to know where the revision
register is located, but you need to read out the revision
register for that. This is impossible.

We need to know the revision register address by other means.
Use BL_CODE_BASE, where the base address of the TF image that is
currently running. If it is bigger than 0x80000000 (i.e. the DRAM
base is 0x80000000), we assume it is a legacy SoC.

Change-Id: I9d7f4325fe2085a8a1ab5310025e5948da611256
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

* changes:
  marvell: Consolidate console register calls
  uniphier: Use generic console_t data structure
  spe: Use generic console_t data structure
  LS 16550: Use generic console_t data structure
  stm32: Use generic console_t data structure
  rcar: Use generic console_t data structure
  a3700: Use generic console_t data structure
  16550: Use generic console_t data structure
  imx: Use generic console_t data structure

* changes:
  coreboot: Use generic base address
  skeletton: Use generic console_t data structure
  cdns: Use generic console_t data structure

This patch fixes incorrect setting for DEVICE1_SIZE
for FVP platforms with more than 8 PEs.
The current value of 0x200000 supports only 8 PEs
and causes exception for FVP platforms with the greater
number of PEs, e.g. FVP_Base_Cortex_A65AEx8 with 16 PEs
in one cluster.

Change-Id: Ie6391509fe6eeafb8ba779303636cd762e7d21b2
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Now that different UARTs share the same console_t struct, we can
simplify the console selection for the Marvell platforms:
We share the same console_t pointers, just change the name of the
console register functions, depending on the selected platform.

Change-Id: I6fe3e49fd7f208a9b3372c5deef43236a12867bc
Signed-off-by: Andre Przywara <andre.przywara@arm.com>