GitLab

Remove recursion from xlat_tables_v2 library

drivers: synopsys: Fix synopsys MMC driver

plat/synquacer: enable SCMI support

bl2-el3: Fix exit to bl32 by ensuring full write to SPSR

Update checkpatch options

fdts: stm32mp1: add bsec node

A bug recently fixed in bl2/aarch32/bl2_el3_entrypoint.S relates to
programming the lower-order 16 bits of the SPSR to populate into the CPSR
on eret.

The BL1 smc-handler code is identical and has the same shortfall in
programming the SPSR from the platform defined struct
entry_point_info->spsr.

msr spsr, r1 will only update bits f->[31:24] and c->[7:0] respectively. In
order to ensure the 16 lower-order processor mode bits x->[15:8] and
c->[7:0] this patch changes msr spsr, r1 to msr spsr_xc, r1.

This change ensures we capture the x field, which we are interested in and
not the f field which we are not.

Fixes: f3b4914b

 ('AArch32: Add generic changes in BL1')
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

Prior to entry into BL32 we set the SPSR by way of msr spsr, r1.
This unfortunately only writes the bits f->[31:24] and c->[7:0].

This patch updates the bl2 exit path to write the x->[15:8] and c->[7:0]
fields of the SPSR. For the purposes of initial setup of the SPSR the x and
c fields should be sufficient and importantly will capture the necessary
lower-order control bits that f:c alone do not.

This is important to do to ensure the SPSR is set to the mode the platform
intends prior to performing an eret.

Fixes: b1d27b48

 ("bl2-el3: Add BL2_EL3 image")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

MHU doorbell driver requires arm platform specific
macro "PLAT_CSS_MHU_BASE".
Rename it to "PLAT_MHUV2_BASE", so that platforms other than arm
can use generic MHU doorbell driver.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>

Enable the SCMI protocol support in SynQuacer platform.
Aside from power domain, system power and apcore management protocol,
this commit adds the vendor specific protocol(0x80).
This vendor specific protocol is used to get the dram mapping information
from SCP.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>

There are some issues with synopsys MMC driver:
- CMD8 should not expect data (for SD)
- ACMD51 should expect data (Send SCR for SD)
- dw_prepare should not dictate size to be MMC_BLOCK_SIZE, block size is
now handled in the dw_prepare function
- after the CMD completes, when doing dw_read, we need to invalidate cache
and wait for the data transfer to complete
- Need to set FIFO threshold, otherwise DMA might never get the interrupt
to read or write
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>

mmc: stm32_sdmmc2: fill ocr_voltage

Some checks are ignored as they do not match TF-A coding rules:
PREFER_KERNEL_TYPES, USLEEP_RANGE
or MISRA:
COMPARISON_TO_NULL, UNNECESSARY_PARENTHESES

Change-Id: I335ede89fc872a6169028552d1ba9312fc61a0ba
Signed-off-by: Yann Gautier <yann.gautier@st.com>

It can be handy for example to add --strict option which can detect more
coding issues, even if not mandated by TF-A coding rules.
To use it:
 CHECKPATCH_OPTS="--strict" make checkpatch

Change-Id: I707e4cc2d1250b21f18ff16169b5f1e5ab03a7ed
Signed-off-by: Yann Gautier <yann.gautier@st.com>

MISRA C:2012	Rule 15.6 asks to have braces for the body of an if,
for, or while statement.
This conflicts with checkpatch, and the warning should then be ignored.

Change-Id: I22589b68b03f19a426d3bcbc10a99d4e4c76eced
Signed-off-by: Yann Gautier <yann.gautier@st.com>

This node is added in a new file stm32mp157c-security.dtsi.
This node includes OTPs that should be shadowed and made readable
to non secure world.
Explicitly add status and secure-status, as these OTPs are accessible
by secure and non-secure world.

The stgen node is also moved to this file.

Change-Id: I3c89a01588d2e411fecfc44997e1c5df2fc37cad
Signed-off-by: Yann Gautier <yann.gautier@st.com>

So far the DT node describing the AXP803 PMIC used in many Allwinner A64
boards had only one subnode, so our code just entering the first subnode
to find all regulators worked fine.

However recent DT updates in the Linux kernel add more subnodes *before*
that, so we need to make sure to explicitly enter the "regulators"
subnode to find the information we are after.

Improve some DT node parsing error handling on the way.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

The BL handover interface stores the bootloader arguments in
registers r9-r12, so when the reset_handler stores the lr pointer
in r10 it clobers one of the arguments.

Adapt to use r8 and adapt the comment about registers allowed
to clober.

I've checked aarch32 reset_handlers and none seem to use higher
registers as far as I can tell.

Fixes: a6f340fe

 ("Introduce the new BL handover interface")
Cc: Soby Mathew <soby.mathew@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Allow EL2 (e.g. U-Boot) to load the configuration object at runtime
into the Xilinx ZynqMP PMU firmware. This allows booting with U-Boot
and U-Boot SPL with PMU FW without hard-coding the configuration
object.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>

STM32MP1 SDMMC device voltage is 3.3V. We should then precise the 2 ranges
3.2 to 3.3V and 3.3 to 3.4V in ocr_voltage field.

Change-Id: I88e479f8f16bfe608a7808eace0df3fdec48deab
Signed-off-by: Yann Gautier <yann.gautier@st.com>

BL31: Enable pointer authentication support in warm boot path

plat: intel: Add MMC OCR voltage information for initialization

drivers: mmc: Fix some issues with MMC stack

MMC stack needs OCR voltage information for the platform to initialize
MMC controller correctly.
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>

MMC stack needs OCR voltage information for the platform to initialize
MMC controller correctly.
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>

intel: Mailbox service un-accessible

plat: intel: Improve ECC scrubbing performance

stm32mp1: zeromem device_info struct

Pb/wiki import

Some files imported from the wiki are missing RST section headers and
other files are using inconsistent characters for the same header level.

Change-Id: I318c843f9bc8fb40074ef90827b9acac06463662
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

Some security advisories did not contain a direct link to the CVE page
on mitre.org.

Change-Id: I80f8f27a25da3a76b564a3e49cafe5e253379f37
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

This patch covers two changes:

- Links that refer to GitHub are updated to point to the
  relevant content on trustedfirmware.org

- Internal links between documents have been updated,
  with the required .rst suffix being added or due
  to a change in the relative locations of the files.

Change-Id: Ibf87da7d2ece726d1c94a9b33a2bbc3129de7779
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

With the TF wiki being migrated from GitHub to trustedfirmware.org,
some documents will be moved into the docs/ directory within the
repository rather than remaining as external content. The
appropriate action has been decided on a per-document basis.

Change-Id: Id0f615f3418369256f30d2e34e354a115389d105
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
Signed-off-by: Paul Beesley <paul.beesley@arm.com>

In the current Pointer Authentication support added in
commit b86048c4


PAuth gets enabled in BL31 cold boot entrypoint only,
(see bl31_entrypoint() in bl31\aarch64\bl31_entrypoint.S)
but not in bl31_warm_entrypoint().
This results in EnIA bit [31] in SCTLR_EL3 not being set
and pointer authentication disabled after CPU wake-up event.

Fixes ARM-software/tf-issues#684

Change-Id: I27a67804764dfba2a6d72ca119ca2bcff4f536d6
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

doc: Remove todo from example code

The change of the structure highlighted the fact that all fields are not
correctly initialized with zeroes.

Replace the other memset in the function with zeromem, as it is faster.

Change-Id: I27f45a64e34637f79fa519f486bf5936721ef396
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Change map region for device 2 from non-secure to secure
Signed-off-by: Muhammad Hadi Asyrafi Abdul Halim <muhammad.hadi.asyrafi.abdul.halim@intel.com>

Some bugs in MMC stack needs to be fixed:
- scr cannot be local as this will cause cache issue when invalidating
after the read DMA transfer is completed
- ACMD41 needs to send voltage information in initialization, otherwise the
command is a query, thus will not initialize the controller
- when checking device state, retry until the retries counter goes to zero
before failing
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>

We should be using zeromem to scrub memory instead of memset. This would
improve the performance by 200x
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>

Keeping that in the docs is a bit untidy

Change-Id: Ia95246208cee48df1536b4317a8c896ab2c84fc2
Signed-off-by: Paul Beesley <paul.beesley@arm.com>