Skip to content

GitLab

Switch branch/tag
  1. 25 Feb, 2020 9 commits
  3. 07 Feb, 2020 3 commits
    • Aditya Angadi's avatar
      drivers/arm/scmi: allow use of multiple SCMI channels · 31e703f9
      Aditya Angadi authored 
      

On systems that have multiple platform components that can interpret the
SCMI messages, there is a need to support multiple SCMI channels (one
each to those platform components). Extend the existing SCMI interface
that currently supports only a single SCMI channel to support multiple
SCMI channels.

Change-Id: Ice4062475b903aef3b5e5bc37df364c9778a62c5
Signed-off-by: default avatarAditya Angadi <aditya.angadi@arm.com>
      31e703f9
    • Aditya Angadi's avatar
      drivers/mhu: derive doorbell base address · f8931606
      Aditya Angadi authored 
      

In order to allow the MHUv2 driver to be usable with multiple MHUv2
controllers, use the base address of the controller from the platform
information instead of the MHUV2_BASE_ADDR macro.

Change-Id: I4dbab87b929fb0568935e6c8b339ce67937f8cd1
Signed-off-by: default avatarAditya Angadi <aditya.angadi@arm.com>
      f8931606
    • Louis Mayencourt's avatar
      fconf: Move platform io policies into fconf · 0a6e7e3b
      Louis Mayencourt authored 
      

Use the firmware configuration framework to store the io_policies
information inside the configuration device tree instead of the static
structure in the code base.

The io_policies required by BL1 can't be inside the dtb, as this one is
loaded by BL1, and only available at BL2.

This change currently only applies to FVP platform.

Change-Id: Ic9c1ac3931a4a136aa36f7f58f66d3764c1bfca1
Signed-off-by: default avatarLouis Mayencourt <louis.mayencourt@arm.com>
      0a6e7e3b
  5. 30 Jan, 2020 1 commit
    • Grzegorz Jaszczyk's avatar
      plat: marvell: armada: add support for loading MG CM3 images · 81646055
      Grzegorz Jaszczyk authored 
      

In order to access MG SRAM, the amb bridge needs to be configured which is
done in bl2 platform init.

For MG CM3, the image is only loaded to its SRAM and the CM3 itself is
left in reset. It is because the next stage bootloader (e.g. u-boot)
will trigger action which will take it out of reset when needed. This
can happen e.g. when appropriate device-tree setup (which has enabled
802.3 auto-neg) will be chosen. In other cases the MG CM3 should not be
running.

Change-Id: I816ea14e3a7174eace068ec44e3cc09998d0337e
Signed-off-by: default avatarGrzegorz Jaszczyk <jaz@semihalf.com>
      81646055
  7. 28 Jan, 2020 1 commit
  9. 20 Jan, 2020 7 commits
  11. 10 Jan, 2020 1 commit
  13. 03 Jan, 2020 1 commit
    • Vishnu Banavath's avatar
      drivers: add a driver for snoop control unit · c20c0525
      Vishnu Banavath authored 
      

The SCU connects one to four Cortex-A5/Cortex-A9 processors
to the memory system through the AXI interfaces.

The SCU functions are to:
- maintain data cache coherency between the Cortex-A5/Cortex-A9
  processors
- initiate L2 AXI memory accesses
- arbitrate between Cortex-A5/Cortex-A9 processors requesting
  L2 accesses
- manage ACP accesses.

Snoop Control Unit will enable to snoop on other CPUs caches.
This is very important when it comes to synchronizing data between
CPUs. As an example, there is a high chance that data might be
cache'd and other CPUs can't see the change. In such cases,
if snoop control unit is enabled, data is synchoronized immediately
between CPUs and the changes are visible to other CPUs.

This driver provides functionality to enable SCU as well as enabling
user to know the following
- number of CPUs present
- is a particular CPU operating in SMP mode or AMP mode
- data cache size of a particular CPU
- does SCU has ACP port
- is L2CPRESENT

Change-Id: I0d977970154fa60df57caf449200d471f02312a0
Signed-off-by: default avatarVishnu Banavath <vishnu.banavath@arm.com>
      c20c0525
  15. 30 Dec, 2019 1 commit
    • Andre Przywara's avatar
      console: 16550: Prepare for skipping initialisation · cd50ffd2
      Andre Przywara authored 
      

On some platforms the UART might have already been initialised, for
instance by firmware running before TF-A or by a separate management
processor. In this case it would not be need to initialise it again
(doing so could create spurious characters). But more importantly this
saves us from knowing the right baudrate and the right base clock rate
for the UART. This can lead to more robust and versatile firmware builds.

Allow to skip the 16550 UART initialisation and baud rate divisor
programming, by interpreting an input clock rate of "0" to signify this
case. This will just skip the call to console_16550_core_init, but still
will register the console properly.

Users should just pass 0 as the second parameter, the baudrate (third
parameter) will then be ignored as well.

Fix copy & paste typos in comments for the console_16550_register()
function on the way.
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
Change-Id: I9f8fca5b358f878fac0f31dc411358fd160786ee
      cd50ffd2
  17. 14 Dec, 2019 2 commits
    • Samuel Holland's avatar
      allwinner: Convert AXP803 regulator setup code into a driver · 0bc752c9
      Samuel Holland authored 
      

Previously, the A64/H5 and H6 platforms' PMIC setup code was entirely
independent. However, some H6 boards also need early regulator setup.

Most of the register interface and all of the device tree traversal code
can be reused between the AXP803 and AXP805. The main difference is the
hardware bus interface, so that part is left to the platforms. The
remainder is moved into a driver.

I factored out the bits that were obviously specific to the AXP803;
additional changes for compatibility with other PMICs can be made as
needed.

The only functional change is that rsb_init() now checks the PMIC's chip
ID register against the expected value. This was already being done in
the H6 version of the code.
Signed-off-by: default avatarSamuel Holland <samuel@sholland.org>
Change-Id: Icdcf9edd6565f78cccc503922405129ac27e08a2
      0bc752c9
    • Samuel Holland's avatar
      drivers: allwinner: axp: Add AXP805 support · f6d9c4ca
      Samuel Holland authored 
      

This adds the new regulator list, as well as changes to make the switch
(equivalent to DC1SW on the AXP803) work on both PMICs.
Signed-off-by: default avatarSamuel Holland <samuel@sholland.org>
Change-Id: I9a1eac8ddfc54b27096c10a8eebdd51aaf9b8311
      f6d9c4ca
  19. 11 Dec, 2019 1 commit
  21. 11 Nov, 2019 1 commit
  23. 08 Oct, 2019 1 commit
  25. 03 Oct, 2019 2 commits
  27. 26 Sep, 2019 1 commit
    • Madhukar Pappireddy's avatar
      GICv3: Enable multi socket GIC redistributor frame discovery · ec834925
      Madhukar Pappireddy authored 
      

This patch provides declaration and definition of new GICv3 driver
API: gicv3_rdistif_probe().This function delegates the responsibility
of discovering the corresponding Redistributor base frame to each CPU
itself. It is a modified version of gicv3_rdistif_base_addrs_probe()
and is executed by each CPU in the platform unlike the previous
approach in which only the Primary CPU did the discovery of all the
Redistributor frames for every CPU.

The flush operations as part of gicv3_driver_init() function are
made necessary even for platforms with WARMBOOT_ENABLE_DCACHE_EARLY
because the GICv3 driver data structure contents are accessed by CPU
with D-Cache turned off during power down operations.

Change-Id: I1833e81d3974b32a3e4a3df4766a33d070982268
Signed-off-by: default avatarMadhukar Pappireddy <madhukar.pappireddy@arm.com>
      ec834925
  29. 20 Sep, 2019 2 commits
  31. 18 Sep, 2019 1 commit
  33. 13 Sep, 2019 2 commits
  35. 12 Sep, 2019 1 commit
    • Justin Chadwell's avatar
      Support larger RSA key sizes when using MBEDTLS · aacff749
      Justin Chadwell authored 
      

Previously, TF-A could not support large RSA key sizes as the
configuration options passed to MBEDTLS prevented storing and performing
calculations with the larger, higher-precision numbers required. With
these changes to the arguments passed to MBEDTLS, TF-A now supports
using 3072 (3K) and 4096 (4K) keys in certificates.

Change-Id: Ib73a6773145d2faa25c28d04f9a42e86f2fd555f
Signed-off-by: default avatarJustin Chadwell <justin.chadwell@arm.com>
      aacff749
  37. 05 Sep, 2019 2 commits