GitLab

The size of debug binaries of SCP has increased beyond the current
limit of 80kB set in platform. Hence, increase it to 128kB.

Change-Id: I5dbcf87f8fb35672b39abdb942c0691fb339444a
Signed-off-by: Usama Arif <usama.arif@arm.com>

This change replaces hdlcd with DPU in dts file for TC0

Change-Id: If25dfd3ddffc07279ab487f65e1bb82b27a26604
Signed-off-by: Avinash Mehta <avinash.mehta@arm.com>

Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I69365d4aed1160af41e291f6e4b1dd31cbd12e02

The API can be used to invoke a 'stop_func' callback for all
other cores from any initiating core. Optionally it can also
wait for other cores to power down. There may be various use
of such API by platform. Ex: Platform may use this to power
down all other cores from a crashed core.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Change-Id: I4f9dc8a38d419f299c021535d5f1bcc6883106f9

The DSU contains system control registers in the SCU and L3 logic to
control the functionality of the cluster. If "DIRECT CONNECT" L3
memory system variant is used, there won't be any L3 cache,
snoop filter, and SCU logic present hence no system control register
will be present. Hence check SCU presence before accessing DSU register
for DSU_936184 errata.
Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Change-Id: I1ffa8afb0447ae3bd1032c9dd678d68021fe5a63

At the moment BL31 dynamically discovers the CPU topology of an FPGA
system at runtime, but does not export it to the non-secure world.
Any BL33 user would typically looks at the devicetree to learn about
existing CPUs.

This patch exports a minimum /cpus node in a devicetree to satisfy
the binding. This means that no cpumaps or caches are described.
This could be added later if needed.

An existing /cpus node in the DT will make the code bail out with a
message.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I589a2b3412411a3660134bdcef3a65e8200e1d7e

* changes:
  Tegra: common: disable GICC after domain off
  cpus: denver: skip DCO enable/disable for recent SKUs

This patch creates and populates the /cpus node in a device tree
based on the existing topology. It uses the minimum required nodes
and properties to satisfy the binding as specified in
https://www.kernel.org/doc/Documentation/devicetree/bindings/arm/cpus.txt

Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I03bf4e9a6427da0a3b8ed013f93d7bc43b5c4df0

* changes:
  Tegra: platform specific BL31_SIZE
  Tegra186: sanity check power state type
  Tegra: fixup CNTPS_TVAL_EL1 delay timer reads
  Tegra: add platform specific 'runtime_setup' handler
  Tegra: remove ENABLE_SVE_FOR_NS = 0
  lib: cpus: denver: add MIDR PN9 variant
  cpus: denver: introduce macro to declare cpu_ops

This patch implements support for the 64-bit and 32-bit versions of
0xBF00FF01 SMC function ID, as documented by the SMCCC, to allow
non-secure world clients to query SPD's UUID.

In order to service this FID, the Trusty SPD now increases the range
of SMCs that it services. To restrict Trusty from receiving the extra
SMC FIDs, this patch drops any unsupported FID.

Verified with TFTF tests for UID query and internal gtest for Trusty.

Change-Id: If96fe4993f7e641595cfe67cc6b4210a0d52403f
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

If the CPU doesn't run from BL31_BASE, the firmware needs to be
copied from load address to BL31_BASE during cold boot. The size
should be the actual size of the code, which is indicated by the
__RELA_END__ linker variable.

This patch updates the copy routine to use this variable as a
result.
Signed-off-by: anzhou <anzhou@nvidia.com>
Change-Id: Ie3a48dd54cda1dc152204903d609da3117a0ced9

The the GIC CPU interface should be disabled after cpu off. The
Tegra power management code should mark the connected core as asleep
as part of the CPU off sequence.

This patch disables the GICC after CPU off as a result.
Signed-off-by: anzhou <anzhou@nvidia.com>
Change-Id: Ib1a3d8903f5e6d55bd2ee0c16134dbe2562235ea

DCO is not supported by the SKUs released after MIDR_PN4. This
patch skips enabling or disabling the DCO on these SKUs.

Change-Id: Ic31a829de3ae560314d0fb5c5e867689d4ba243b
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch moves the BL31_SIZE to the Tegra SoC specific
tegra_def.h. This helps newer platforms configure the size of
the memory available for BL31.
Signed-off-by: anzhou <anzhou@nvidia.com>
Change-Id: I43c60b82fa7e43d5b05d87fbe7d673d729380d82

This patch sanity checks the power state type before use,
from the platform's PSCI handler.

Verified with TFTF Standard Test Suite.

Change-Id: Icd45faac6c023d4ce7f3597b698d01b91a218124
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The delay_timer driver for Tegra uses the CNTPS_TVAL_EL1 secure, physical,
decrementing timer as the source. The current logic incorrectly marks this
as an incrementing timer, by negating the timer value.

This patch fixes the anomaly and updates the driver to remove this logic.
Signed-off-by: anzhou <anzhou@nvidia.com>
Change-Id: I60490bdcaf0b66bf4553a6de3f4e4e32109017f4

Tegra SoCs would like the flexibility to perform chip specific actions
before we complete cold boot. This patch introduces a platform specific
'runtime_setup' handler to provide that flexibility.

Change-Id: I13b2489f631f775cae6f92acf51a240cd036ef11
Signed-off-by: Kalyani Chidambaram Vaidyanathan <kalyanic@nvidia.com>

The SVE CPU extension library reads the id_aa64pfr0_el1 register to
check if SVE is enabled. Tegra platforms disabled ENABLE_SVE_FOR_NS for
pre-8.2 platforms, but this flag can safely be enabled now that the
library can enable the feature at runtime.

This patch updates the makefile to remove "ENABLE_SVE_FOR_NS = 0"
as a result.

Change-Id: Ia2a89ac90644f8c0d39b41d321e04458ff6be6e1
Signed-off-by: Kalyani Chidambaram Vaidyanathan <kalyanic@nvidia.com>

This patch introduces support for PN9 variant for some
Denver based platforms.

Original change by: Hemant Nigam <hnigam@nvidia.com>
Signed-off-by: Kalyani Chidambaram Vaidyanathan <kalyanic@nvidia.com>
Change-Id: I331cd3a083721fd1cd1b03f4a11b32fd306a21f3

This patch introduces a macro to declare cpu_op for all Denver
SKUs.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: Ibcf88c3256fc5dcaa1be855749ebd2c5c396c977

This reduces the scope of these variables and resolves Misra violations
such as:
    bl1/aarch64/bl1_context_mgmt.c:21:[MISRA C-2012 Rule 8.9 (advisory)]
    "bl1_cpu_context" should be defined at block scope.
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Change-Id: I9b0b26395bce07e10e61d10158c67f9c22ecce44

I am leaving Socionext. Orphan the UniPhier platform until somebody
takes the role.

Change-Id: I54d3da6d49c1ccaaa475431654db578b683db88a
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

* changes:
  Tegra194: remove unused tegra_mc_defs header
  Tegra: memctrl: platform setup handler functions
  Tegra194: memctrl: remove streamid security cfg registers
  Tegra194: memctrl: remove streamid override cfg registers
  Tegra: debug prints indicating SC7 entry sequence completion
  Tegra194: add strict checking mode verification
  Tegra194: memctrl: update TZDRAM base at 1MB granularity
  Tegra194: ras: split up RAS error clear SMC call.
  Tegra: platform specific GIC sources
  Tegra194: add memory barriers during DRAM to SysRAM copy
  Tegra: sip: add VPR resize enabled check
  Tegra194: add redundancy checks for MMIO writes
  Tegra: remove unused cortex_a53.h
  Tegra194: report failure to enable dual execution
  Tegra194: verify firewall settings before resource use