GitLab

The Tegra simulation environment has limited capabilities. This patch
checks the chip's major and minor versions to decide the features to
enable/disable - MCE firmware version checking is disabled and limited
Memory Controller settings are enabled

Change-Id: I258a807cc3b83cdff14a9975b4ab4f9d1a9d7dcf
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch checks that the system is running with the supported MCE
firmware during boot. In case the firmware version does not match the
interface header version, then the system halts.

Change-Id: Ib82013fd1c1668efd6f0e4f36cd3662d339ac076
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds a new interface to allow for making an ARI call that
will enable LATIC for the chip verification software harness.

LATIC allows some MINI ISMs to be read in the CCPLEX. The ISMs are
used for various measurements relevant ot particular locations in
Silicon. They are small counters which can be polled to determine
how fast a particular location in the Silicon is.

Original change by Guy Sotomayor <gsotomayor@nvidia.com>

Change-Id: Ifb49b8863a009d4cdd5d1ba38a23b5374500a4b3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

This patch adds the chip level support for System Suspend entry
and exit. As part of the entry sequence we first query the MCE
firmware to check if it is safe to enter system suspend. Once
we get a green light, we save hardware block settings and enter
the power state. As expected, all the hardware settings are
restored once we exit the power state.

Change-Id: I6d192d7568d6a555eb10efdfd45f6d79c20f74ea
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

The CPU Complex (CCPLEX) Power Manager (Denver MCE, or DMCE) is an
offload engine for BPMP to do voltage related sequencing and for
hardware requests to be handled in a better latency than BPMP-firmware.

There are two interfaces to the MCEs - Abstract Request Interface (ARI)
and the traditional NVGINDEX/NVGDATA interface.

MCE supports various commands which can be used by CPUs - ARM as well
as Denver, for power management and reset functionality. Since the
linux kernel is the master for all these scenarios, each MCE command
can be issued by a corresponding SMC. These SMCs have been moved to
SiP SMC space as they are specific to the Tegra186 SoC.

Change-Id: I67bee83d2289a8ab63bc5556e5744e5043803e51
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>