GitLab

This reverts commit fdae60b6.

The commit fdae60b6

 changed the
parameter encoding for the hikey960.  However that implies a DT change
in the kernel side.  After submitting the DT change for upstreaming,
the backward compatibility issue and the interface change raise some
concerns from the Linux community about the issues related to kernel <->
ATF alignment.  There is no way to detect a mis-alignment of those
without a deep knowledge of the ATF and the kernel.  Furthermore, the
failing calls to PSCI in the idle path (because of bad parameters), will
lead to busy looping, implying: thermal issues and extra energy
consumption.

In regard of the Linux community concerns, the potential issues when the
ATF and the kernel are not aligned, it is preferable to revert the
commit.

Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Kevin Wang <jean.wangtao@linaro.org>
Co-authored-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>

ARM platforms: Allow platforms to define SDEI events

Add Secure Partition Manager (SPM) design document

Add support to left-pad with zeroes in tf_printf

Disable PIE compilation option

io: block: fix block_read/write may read/write overlap buffer

SPM: Fix MM_COMMUNICATE_AARCH32/64 parameters

With this patch, ARM platforms are expected to define the macros
PLAT_ARM_SDEI_PRIVATE_EVENTS and PLAT_ARM_SDEI_SHARED_EVENTS as a list
of private and shared events, respectively. This allows for individual
platforms to define their own events.

Change-Id: I66851fdcbff83fd9568c2777ade9eb12df284b49
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

poplar: Add BL32 (OP-TEE) support and misc updates

Add support to formats %i, %d, %p, %x and %u for left-padding numbers
with zeroes (e.g. `%08x`).

Change-Id: Ifd4795a82a8d83da2c00b44b9e482a2d9be797e3
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This patch adds documentation that describes the design of the Secure
Partition Manager and the specific choices in their current
implementation.

The document "SPM User Guide" has been integrated into the design
document.

Change-Id: I0a4f21a2af631c8aa6c739d97a5b634f3cb39991
Co-authored-by: Achin Gupta <achin.gupta@arm.com>
Co-authored-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

ARM TF does not work correctly if built with a version of gcc
that is configured to use PIE by default (e.g. Debian Stretch).

This patch identifies when such a version of gcc is being used
(by searching for --enable-default-pie) and adds -fno-PIE option
to TF_CFLAGS.

fixes arm-software/tf-issues#519

Change-Id: I2322122c49841746d35d152694e14f6f73beb0fd
Signed-off-by: David Cunado <david.cunado@arm.com>
Co-Authored-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Steve Capper <steve.capper@arm.com>
Tested-by: Alexei Fedorov <alexei.fedorov@arm.com>

Makefile: Add ability to build dtb (v2)

The block operations were trying to optimize the number of memory
copies, and it tried to use directly the buffer supplied by the user
to them. This was a mistake because it created too many corner cases:

	1- It was possible to generate unaligned
	   operations to unaligned buffers. Drivers that were using
	   DMA transfer failed in that case.

	2- It was possible to generate read operations
	   with sizes that weren't a multiple of the block size. Some
	   low level drivers assumed that condition and they calculated
	   the number of blocks dividing the number of bytes by the
	   size of the block, without considering the remaining bytes.

	3- The block_* operations didn't control the
	   number of bytes actually copied to memory, because the
	   low level drivers were writing directly to the user buffer.

This patch rewrite block_read and block_write to use always the device
buffer, which the platform ensures that has the correct aligment and
the correct size.

Change-Id: I5e479bb7bc137e6ec205a8573eb250acd5f40420
Signed-off-by: Qixiang Xu <qixiang.xu@arm.com>
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

This partially reverts commit d6b532b5

, keeping only the fixes to
the assertions. The changes related to the order of arguments passed
to the secure partition were not correct and violated the
specification of the SP_EVENT_COMPLETE SMC.

This patch also improves the MM_COMMUNICATE argument validation.  The
cookie argument, as it comes from normal world, can't be trusted and thus
needs to always be validated at run time rather than using an assertion.

Also validate the communication buffer address and return
INVALID_PARAMETER if it is zero, as per the MM specification.

Fix a few typos in comments and use the "secure partition" terminology
rather than "secure payload".

Change-Id: Ice6b7b5494b729dd44611f9a93d362c55ab244f7
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Signed-off-by: Victor Chong <victor.chong@linaro.org>

The security properties of some IP blocks are configured to secure mode
after reset. This means these IP blocks can only be accessed by cpus
in secure state by default. These should be configured correclty as needed.
Signed-off-by: y00241285 <yyangwei.yangwei@hisilicon.com>
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>

This is currently the maximum allowed without affecting bootup.
Signed-off-by: Victor Chong <victor.chong@linaro.org>

to PLAT_POPLAR_NS_IMAGE_OFFSET
Signed-off-by: Victor Chong <victor.chong@linaro.org>

Per
https://github.com/sdrobertw/Poplar/blob/master/HardwareDocs/Processor_Datasheet_v2XX.pdf


there are 13 groups of GPIO controllers, not 12.
Signed-off-by: Victor Chong <victor.chong@linaro.org>

Enable SVE for Non-secure world

SPM: Move S-EL1/S-EL0 xlat tables to TZC DRAM

fvp: Disable SYSTEM_SUSPEND when ARM_BL31_IN_DRAM 

SDEI: Fix return value of reset calls

poplar: Fix format of documentation

Unify cache flush code path after image load

ARM Platforms: Change the TZC access permissions for EL3 payload

Rename some macros in SPM code

rockchip: Include stdint header in plat_sip_calls.c

Replace magic numbers in linkerscripts by PAGE_SIZE

Hikey960: Change to use recommended power state id format

 Miscellaneous fixes to maintainers.rst

* Update the RockChip sub-maintainer from rkchrome to rockchip-linux
in maintainers.rst.

* Add missing documentation files and change extensions from `md` to `rst`.

* Add sub-maintainer for Socionext UniPhier platform.

Change-Id: I7f498316acb0f7947c6432dbe14988e61a8903fe
Co-Authored-By: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: Dan Handley <dan.handley@arm.com>

A new platform define, `PLAT_SP_IMAGE_XLAT_SECTION_NAME`, has been
introduced to select the section where the translation tables used by
the S-EL1/S-EL0 are placed.

This define has been used to move the translation tables to DRAM secured
by TrustZone.

Most of the extra needed space in BL31 when SPM is enabled is due to the
large size of the translation tables. By moving them to this memory
region we can save 44 KiB.

A new argument has been added to REGISTER_XLAT_CONTEXT2() to specify the
region where the translation tables have to be placed by the linker.

Change-Id: Ia81709b4227cb8c92601f0caf258f624c0467719
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Update Xilinx maintainer details

The document was being rendered incorrectly.

Change-Id: I6e243d17d7cb6247f91698bc195eb0f6efeb7d17
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

After returning from SYSTEM_SUSPEND state, BL31 reconfigures the
TrustZone Controller during the boot sequence. If BL31 is placed in
TZC-secured DRAM, it will try to change the permissions of the memory it
is being executed from, causing an exception.

The solution is to disable SYSTEM_SUSPEND when the Trusted Firmware has
been compiled with ``ARM_BL31_IN_DRAM=1``.

Change-Id: I96dc50decaacd469327c6b591d07964726e58db4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Common code mustn't include ARM platforms headers.

Change-Id: Ib6e4f5a77c2d095e6e8c3ad89c89cb1959cd3043
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

At present, both SDEI_PRIVATE_RESET and SDEI_SHARED_RESET returns
SDEI_PENDING if they fail to unregister an event. The SDEI specification
however requires that the APIs return SDEI_EDENY in these cases. This
patch fixes the return codes for the reset APIs.

Change-Id: Ic14484c91fa8396910387196c256d1ff13d03afd
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

ARM Power State Coordination Interface (ARM DEN 0022D) chapter
6.5 "Recommended StateID Encoding" defines the state ID which can be
used by platforms. The recommended power states can be presented by
below values; and it divides into three fields, every field has 4 bits
to present power states corresponding to core level, cluster level and
system level.

  0: Run
  1: Standby
  2: Retention
  3: Powerdown

This commit changes to use upper recommended power states definition on
Hikey960; and changes the power state validate function to check the
power state passed from kernel side.
Signed-off-by: Leo Yan <leo.yan@linaro.org>