- 18 Jan, 2019 2 commits
-
-
Bryan O'Donoghue authored
This patch defines the expected DTB overlay address in the memory map for this platform. Its important that all points in the boot process agree on this memory map even if not all elements utilize it. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
-
Bryan O'Donoghue authored
Recently upstreamed changes to OP-TEE mean that it is possible for OP-TEE to provide a DTB overlay directly to subsequent boot stages thus negating the requirement to bundle a DTB in the FIP. This patch switches off the dependency on the DTB in the FIP descriptor instead we will provide the necessary data as an overlay from OP-TEE. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
-
- 04 Jan, 2019 1 commit
-
-
Antonio Nino Diaz authored
Enforce full include path for includes. Deprecate old paths. The following folders inside include/lib have been left unchanged: - include/lib/cpus/${ARCH} - include/lib/el3_runtime/${ARCH} The reason for this change is that having a global namespace for includes isn't a good idea. It defeats one of the advantages of having folders and it introduces problems that are sometimes subtle (because you may not know the header you are actually including if there are two of them). For example, this patch had to be created because two headers were called the same way: e0ea0928 ("Fix gpio includes of mt8173 platform to avoid collision."). More recently, this patch has had similar problems: 46f9b2c3 ("drivers: add tzc380 support"). This problem was introduced in commit 4ecca339 ("Move include and source files to logical locations"). At that time, there weren't too many headers so it wasn't a real issue. However, time has shown that this creates problems. Platforms that want to preserve the way they include headers may add the removed paths to PLAT_INCLUDES, but this is discouraged. Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 10 Dec, 2018 1 commit
-
-
Yann Gautier authored
This is used as a table index, and already compared with an unsigned int: block_dev_count. Signed-off-by: Yann Gautier <yann.gautier@st.com>
-
- 08 Nov, 2018 1 commit
-
-
Antonio Nino Diaz authored
All identifiers, regardless of use, that start with two underscores are reserved. This means they can't be used in header guards. The style that this project is now to use the full name of the file in capital letters followed by 'H'. For example, for a file called "uart_example.h", the header guard is UART_EXAMPLE_H. The exceptions are files that are imported from other projects: - CryptoCell driver - dt-bindings folders - zlib headers Change-Id: I50561bf6c88b491ec440d0c8385c74650f3c106e Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 30 Oct, 2018 1 commit
-
-
Antonio Nino Diaz authored
include/plat/arm/common isn't needed by them, and is removed to avoid dependency on Arm platform code. Change-Id: Id9fccba33326fd075b3d1029bf1e4b012dfa0483 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 25 Oct, 2018 1 commit
-
-
Antonio Nino Diaz authored
Even though at this point plat_crash_console_flush is optional, it will stop being optional in a following patch. The console driver of warp7 doesn't support flush, so the implementation is a placeholder. TI had ``plat_crash_console_init`` and ``plat_crash_console_putc``, but they weren't global so they weren't actually used. Also, they were calling the wrong functions. imx8_helpers.S only has placeholders for all of the functions. Change-Id: I8d17bbf37c7dad74e134c61ceb92acb9af497718 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 28 Sep, 2018 1 commit
-
-
Antonio Nino Diaz authored
- Fix reference to bl2_el3_early_platform_setup() - Remove references to removed build options. Change-Id: I9733bec64fc28db15716ddf481c05bdc30700b4a Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
-
- 04 Sep, 2018 9 commits
-
-
Bryan O'Donoghue authored
Previous changes in this series made the necessary driver additions and updates. With those changes in-place we can add the platform.mk and bl2_el3_setup.c to drive the boot process. After this commit its possible to build a fully-functional TF-A for the WaRP7 and boot from the BootROM to the Linux command prompt in secure or non-secure mode. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
-
Bryan O'Donoghue authored
This patch adds a callback into the BootROM's provided High Assurance Boot (HAB) failsafe function when panicking i.e. the call is done without making use of stack. The HAB failsafe function allows a piece of software to call into the BootROM and place the processor into failsafe mode. Failsafe mode is a special mode which presents a serial download protocol interface over UART or USB at the time of writing. If the board has been set into secure mode, then only a signed binary can be used to recover the board. Thus failsafe gives a putatively secure method of performing a secure recovery over UART or USB. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>
-
Bryan O'Donoghue authored
This patch adds entries to the mem params array for - BL32 - BL32_EXTRA1 - BL32_EXTRA2 - BL33 - HW_CONFIG_ID BL32 is marked as bootable to indicate that OPTEE is the thing that should be booted next. In our model OPTEE chain-loads onto u-boot so only BL32 is bootable. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
-
Bryan O'Donoghue authored
This commit adds support for parsing a FIP pre-loaded by a previous boot-phase such as u-boot or via ATF reading directly from eMMC. [bod: squashing several patches from Rui, Jun and bod] Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
-
Bryan O'Donoghue authored
This patch defines a platform_def.h describing - FIP layout and location - eMMC device select - UART identity select - System clock frequency - Operational memory map Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
-
Bryan O'Donoghue authored
In order to link even a basic image we need to declare REGISTER_BL_IMAGE_DESCS. This patch declares an empty structure which is passed to REGISTER_BL_IMAGE_DESCS(). Later patches will add in some meaningful data. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
-
Bryan O'Donoghue authored
Internal declarations for the WaRP7 port will go here. For now just include sys/types.h. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
-
Bryan O'Donoghue authored
This commit adds warp7_image_load.c with the functions - plat_flush_next_bl_params() - plat_get_bl_image_load_info() - plat_get_next_bl_params() Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
-
Bryan O'Donoghue authored
This commit adds a warp7_helpers.S which contains a implementation of: - platform_mem_init - plat_get_my_entrypoint - plat_crash_console_init - plat_crash_console_putc Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
-