Skip to content

GitLab

Switch branch/tag
  1. 01 Apr, 2021 1 commit
  3. 26 Mar, 2021 1 commit
    • Bharat Gooty's avatar
      driver: brcm: add i2c driver · 48c6a6b6
      Bharat Gooty authored 
      

Broadcom I2C controller driver. Follwoing API's are supported:-
- i2c_init() Intialize ethe I2C controller
- i2c_probe()
- i2c_set_bus_speed() Set the I2C bus speed
- i2c_get_bus_speed() Get the current bus speed
- i2c_recv_byte() Receive one byte of data.
- i2c_send_byte() Send one byteof data
- i2c_read_byte() Read single byte of data
- i2c_read() Read multiple bytes of data
- i2c_write_byte Write single byte of data
- i2c_write() Write multiple bytes of data

This driver is verified by reading the DDR SPD data.
Signed-off-by: default avatarBharat Gooty <bharat.gooty@broadcom.com>
Change-Id: I2d7fe53950e8b12fab19d0293020523ff8b74e13
      48c6a6b6
  5. 24 Mar, 2021 8 commits
  7. 23 Mar, 2021 1 commit
    • Yann Gautier's avatar
      tzc400: add support for interrupts · 34c1a1a4
      Yann Gautier authored 
      

A new function tzc400_it_handler() is created to manage TZC400
interrupts. The required helpers to read and clear interrupts are added
as well.
In case DEBUG is enabled, more information about the faulty access
(address, NSAID, type of access) is displayed.

Change-Id: Ie9ab1c199a8f12b2c9472d7120efbdf35711284a
Signed-off-by: default avatarYann Gautier <yann.gautier@st.com>
      34c1a1a4
  9. 18 Mar, 2021 1 commit
  11. 15 Mar, 2021 1 commit
  13. 10 Mar, 2021 1 commit
  15. 08 Mar, 2021 1 commit
  17. 01 Mar, 2021 1 commit
  19. 25 Feb, 2021 1 commit
  21. 15 Feb, 2021 1 commit
    • Andre Przywara's avatar
      plat/arm: juno: Condition Juno entropy source with CRC instructions · eb18ce32
      Andre Przywara authored 
      

The Juno Trusted Entropy Source has a bias, which makes the generated
raw numbers fail a FIPS 140-2 statistic test.

To improve the quality of the numbers, we can use the CPU's CRC
instructions, which do a decent job on conditioning the bits.

This adds a *very* simple version of arm_acle.h, which is typically
provided by the compiler, and contains the CRC instrinsics definitions
we need. We need the original version by using -nostdinc.

Change-Id: I83d3e6902d6a1164aacd5060ac13a38f0057bd1a
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      eb18ce32
  23. 11 Feb, 2021 2 commits
  25. 09 Feb, 2021 1 commit
    • Heyi Guo's avatar
      tzc400: fix logical error in FILTER_BIT definitions · 3d66ca6d
      Heyi Guo authored 
      

The filters parameter passed to tzc400_configure_region() is supposed
to be filter bit flag without bit shift, so the macros
TZC_400_REGION_ATTR_FILTER_BIT and TZC_400_REGION_ATTR_FILTER_BIT_ALL
should always construct the value without any shift.

It is not a functional issue for TZC_REGION_ATTR_F_EN_SHIFT is lucky
to be 0.
Signed-off-by: default avatarHeyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I5d363c462b8517256523f637e670eefa56722afd
      3d66ca6d
  27. 05 Feb, 2021 1 commit
  29. 04 Feb, 2021 1 commit
  31. 03 Feb, 2021 4 commits
  33. 29 Jan, 2021 1 commit
    • Madhukar Pappireddy's avatar
      Fix exception handlers in BL31: Use DSB to synchronize pending EA · c2d32a5f
      Madhukar Pappireddy authored 
      For SoCs which do not implement RAS, use DSB as a barrier to
synchronize pending external aborts at the entry and exit of
exception handlers. This is needed to isolate the SErrors to
appropriate context.

However, this introduces an unintended side effect as discussed
in the https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3440


A summary of the side effect and a quick workaround is provided as
part of this patch and summarized here:

The explicit DSB at the entry of various exception vectors in BL31
for handling exceptions from lower ELs can inadvertently trigger an
SError exception in EL3 due to pending asyncrhonouus aborts in lower
ELs. This will end up being handled by serror_sp_elx in EL3 which will
ultimately panic and die.

The way to workaround is to update a flag to indicate if the exception
truly came from EL3. This flag is allocated in the cpu_context
structure. This is not a bullet proof solution to the problem at hand
because we assume the instructions following "isb" that help to update
the flag (lines 100-102 & 139-141) execute without causing further
exceptions.

Change-Id: I4d345b07d746a727459435ddd6abb37fda24a9bf
Signed-off-by: default avatarMadhukar Pappireddy <madhukar.pappireddy@arm.com>
      c2d32a5f
  35. 20 Jan, 2021 1 commit
  37. 18 Jan, 2021 2 commits
    • Pali Rohár's avatar
      marvell: uart: a3720: Fix macro name for 6th bit of Status Register · b8e637f4
      Pali Rohár authored 
      

This patch does not change code, it only updates comments and macro name
for 6th bit of Status Register. So TF-A binary stay same.

6th bit of the Status Register is named TX EMPTY and is set to 1 when both
Transmitter Holding Register (THR) or Transmitter Shift Register (TSR) are
empty. It is when all characters were already transmitted.

There is also TX FIFO EMPTY bit in the Status Register which is set to 1
only when THR is empty.

In both console_a3700_core_init() and console_a3700_core_flush() functions
we should wait until both THR and TSR are empty therefore we should check
6th bit of the Status Register.

So current code is correct, just had misleading macro names and comments.
This change fixes this "documentation" issue, fixes macro name for 6th bit
of the Status Register and also updates comments.
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: I19e4e7f53a90bcfb318e6dd1b1249b6cbf81c4d3
      b8e637f4
    • Pali Rohár's avatar
      marvell: uart: a3720: Implement console_a3700_core_getc · 74867756
      Pali Rohár authored 
      

Implementation is simple, just check if there is a pending character in
RX FIFO via RXRDY bit of Status Register and if yes, read it from
UART_RX_REG register.
Signed-off-by: default avatarPali Rohár <pali@kernel.org>
Change-Id: I226b6e336f44f5d0ca8dcb68e49a68e8f2f49708
      74867756
  39. 15 Jan, 2021 1 commit
  41. 13 Jan, 2021 1 commit
  43. 12 Jan, 2021 1 commit
  45. 11 Jan, 2021 1 commit
    • Michal Simek's avatar
      cadence: Change logic in uart driver · 0b3d4273
      Michal Simek authored 
      

Write char if fifo is empty. If this is done like this all chars are
printed. Because origin code just put that chars to fifo and in case of
reset messages were missing.

Before this change chars are put to fifo and only check before adding if
fifo is full. The patch is changing this logic that it is adding char only
when fifo is empty to make sure that in case of reset (by another SW for
example) all chars are printed. Maybe one char can be missed but for IP
itself it is much easier to send just one char compare to full fifo.
Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
Change-Id: Ic24c2c1252bce24be2aed68ee29477ca4a549e5f
      0b3d4273
  47. 14 Dec, 2020 2 commits
  49. 11 Dec, 2020 1 commit
    • Javier Almansa Sobrino's avatar
      Add support for FEAT_MTPMU for Armv8.6 · 0063dd17
      Javier Almansa Sobrino authored 
      

If FEAT_PMUv3 is implemented and PMEVTYPER<n>(_EL0).MT bit is implemented
as well, it is possible to control whether PMU counters take into account
events happening on other threads.

If FEAT_MTPMU is implemented, EL3 (or EL2) can override the MT bit
leaving it to effective state of 0 regardless of any write to it.

This patch introduces the DISABLE_MTPMU flag, which allows to diable
multithread event count from EL3 (or EL2). The flag is disabled
by default so the behavior is consistent with those architectures
that do not implement FEAT_MTPMU.
Signed-off-by: default avatarJavier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: Iee3a8470ae8ba13316af1bd40c8d4aa86e0cb85e
      0063dd17
  51. 02 Dec, 2020 1 commit
  53. 30 Nov, 2020 1 commit