GitLab

Add support for “AVS reduction” feature at this mode for
7040 Dual Cluster operation mode at CPU=1600MHz

Change-Id: Ia72b10e0ccfad07568bf4c089ea3990173ae24b2
Signed-off-by: Alex Evraev <alexev@marvell.com>

the twin-die combined memory device should be treated as
X8 device and not as X16 one. This patch is required to
re-enable compilation after BLE (mv-ddr-marvell) firmware upgrade.

Change-Id: I41257ff2825164ebca85a84bbb8462d7b3447b97
Signed-off-by: Moti Buskila <motib@marvell.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

There is no need to open tree different IO window when there is
possibility of having one covering required range.

Change-Id: I9feae1fc583df1f7d97d28161cf7601f43513856
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

The LLC SRAM will be enabled in OP-TEE OS for usage as secure storage.
The CCU have to prepare SRAM window, but point to the DRAM-0 target
until the SRAM is actually enabled.
This patch changes CCU SRAM window target to DRAM-0
Remove dependence between LLC_SRAM and LLC_ENABLE and update the
build documentation.
The SRAМ base moved to follow the OP-TEE SHMEM area (0x05400000)

Change-Id: I85c2434a3d515ec37da5ae8eb729e3280f91c456
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Area used as trusted DRAM is 12MB in Marvell OP-TEE OS module.
It is followed by 4MB of shared memory.

Change-Id: If8edeeec5861b529408baca25f78c06a0a440d8c
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Implement function which will allow to start AP FW.

Change-Id: Ie0fc8ad138bf56b10809cdc92d1e5e96a2aaf33f
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Add support for the iEi Puzzle-M801 board that is based on
the Marvell Armada 88F8040 SoC.

It supports 1 x 288-pin DIMM, DDR4 2400MHz up to 16 GB (ECC).

The iEi Puzzle-M801 board is using a custom MCU to handle board
power management. The MCU is managing the boards power LEDs, fans
and some other periferals. It's using UART for communication.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Change-Id: I0826ef8bf651b69aad5803184f20930ac7212ef8

Use the BOARD_DIR variable instead of PLAT_FAMILY_BASE variable for
determening the path of the system_power.c file.

The variable was not updated, when it was deprecated in a8k_common.mk
in commit 613bbde0

.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Change-Id: I9b4659a19ba3cd5c869d44c5d834b220f49136e8

Adjust the latest OP-TEE memory definitions to the
newest TF-A baseline.

Change-Id: Ib9c82b85f868adaf3c7285eb340486bda9c59c36
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Extend the CCU tables with secure SRAM window in all board
setups that uses SoCs based on AP806/AP807 North Bridges

Change-Id: I4dc315e4ea847562ac8648d8a8739244b548c70e
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

It is not needed to reserve 64MB for FIP. Limit this to 4MB
for both supported Armada SoC families.

Change-Id: I58a8ce4408a646fe1afd3c1ea1ed54007c8d205d
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
[Extract from bigger commit]
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

- Remove
    TRUSTED_DRAM_BASE
    TRUSTED_DRAM_SIZE
    MARVELL_TRUSTED_SRAM_BASE
- Rename
    PLAT_MARVELL_TRUSTED_DRAM_* -> PLAT_MARVELL_TRUSTED_RAM_*
    PLAT_MARVELL_TRUSTED_SRAM_* -> MARVELL_TRUSTED_DRAM_*
    MARVELL_MAP_SHARED_RAM -> MARVELL_MAP_SECURE_RAM
- Move
    MARVELL_TRUSTED_DRAM_SIZE to marvell_def.h
- Enable MARVELL_MAP_SECURE_RAM region in BL2U memory map
- Add dependency of MARVELL_MAP_SHARED_RAM on LLC_SRAM
- Add minor style improvents

Change-Id: Iebc03361e4f88489af1597f54e137b27c241814c
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
[Improve patch after rebase]
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

Make sure the current CCU window is not in use before adding
a new address map during MSS BL2 image load preparations.
At BL2 stage the CCU Win-2 points to DRAM. If additional mapping is
added to MSS BL2 stage initialization, the DDR entry will be destroyed
and lead to the system hang.

Change-Id: I215e83508acc37d54dab6954d791b9a74cc883ca
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

The configuration space of each standalone CP was updated in BL31.
Loading FW procedure take places earlier in SCP_BL2.
It needs to be done after access to each CP is provided.
Moving the proper configuration from BL31 to BL2 solves it.

Change-Id: I44cf88dfd4ebf09130544332bfdd3d16ef2674ea
Signed-off-by: Ben Peled <bpeled@marvell.com>

As a preparation to support proper loading the OPTEE OS image,
enable the BL32 specific defines in case the SPD is used.

On the occasion move two BL32-related macros to marvell_def.h
and fix BL32_LIMIT definition.

Change-Id: Id4e2d81833bc1895650cca8b0fc0bfc341cf77f3
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>

The phy porting layer uses defaults defined in
"phy-default-porting-layer.h" when board specific file
"phy-porting-layer.h" is not found. Because of the regression the board
specific directory was not included, therefore all boards used default
parameters.

Change-Id: I66e5e6eb8a39cca5aeeb4de6dab2ceddc39c1e31
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Before this patch the configuration took place only for CP0 and CP1, but
since new platforms can contains up to 3 CPs update is required.

Change-Id: Iebd50bbe7b9772063e2c4efb3a7ecbfd593e950d
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Change a topology map from internal database
to SPD based for 32bit bus width mode

Change-Id: I803166893ddc2fd916fc8a1c27fffd34b6ec0c72
Signed-off-by: Alex Leibovich <alexl@marvell.com>

Remove pll powerdown from pll configuration sequence to improve
stability. Remove redundant cases, which no longer exist.
Also get rid of irrelevant definition of CPU_2200_DDR_1200_RCLK_1200,
which is not used by 806/807.

Change-Id: If911e7dee003dfb9a42fafd7ffe34662f026fd23
Signed-off-by: Alex Leibovich <alexl@marvell.com>

This commit introduces 32-bit DDR topology map initialization.
For that purpose a new DDR32 build flag is added, with
according documentation update.

Change-Id: I169ff358c2923afd984e27bc126dc551dcaefc01
Signed-off-by: Alex Leibovich <alexl@marvell.com>

This commit introduces two changes:
- remove hardcoded references to mci0 from the driver
- perform mci optimization for all mci interfaces

It fixes performance issues observed on cn9132 CP2.

Change-Id: I4e040cd54ff95c9134035ac89b87d8feb28e9eba
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

The mci_initialize function name was misleading. The function itself
doesn't initialize MCI in general but performs MCI link tuning for
performance improvement.

Change-Id: I13094ad2235182a14984035bbe58013ebde84a7e
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Change-Id: Id702c070c433f8439faad115830e71b2873ab70a
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Snoop filter needs to be enabled once per cluster.

Change-Id: I241e72f21982142ba290c7547df6f434e6a6a98d
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

By default all external CPs start with configuration address space set to
0xf200_0000. To overcome this issue, go in the loop and initialize the
CP one by one, using temporary window configuration which allows to access
each CP and update its configuration space according to decoding
windows scheme defined for each platform.

In case of cn9130 after this procedure bellow addresses will be used:
CP0 - f2000000
CP1 - f4000000
CP2 - f6000000

When the re-configuration is done there is need to restore previous
decoding window configuration(init_io_win).

Change-Id: I1a652bfbd0bf7106930a7a4e949094dc9078a981
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

Change-Id: Icb8fe14417665d6aadd5a5ee2b77547b4ef78773
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

As a preparation for upcoming support for CN9130 platform, which is
classified as OcteonTx2 product but inherits functionality from a8k,
allow to use a8k_common.mk and mss_common.mk from outside of
PLAT_FAMILY_BASE.
Above is done by introducing BOARD_DIR which needs to be set by each
platform, before including a8k_common.mk and mss_common.mk. This will
allow to use mentioned mk files not only for platforms located under
previously defined PLAT_FAMILY_BASE.

Change-Id: I22356c99bc0419a40ae11e42f37acd50943ea134
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>

This commit is a preparation for upcoming support for OcteonTX and
OcteonTX2 product families. Armada platform related files (docs,
plat, include/plat) are moved to the new "armada" sub-folder.

Change-Id: Icf03356187078ad6a2e56c9870992be3ca4c9655
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>