Skip to content

GitLab

Switch branch/tag
  1. 14 Mar, 2018 1 commit
    • Dimitris Papastamos's avatar
      Fixup `SMCCC_ARCH_FEATURES` semantics · a205a56e
      Dimitris Papastamos authored 
      

When querying `SMCCC_ARCH_WORKAROUND_1` through `SMCCC_ARCH_FEATURES`,
return either:
  * -1 to indicate the PE on which `SMCCC_ARCH_FEATURES` is called
    requires firmware mitigation for CVE-2017-5715 but the mitigation
    is not compiled in.
  * 0 to indicate that firmware mitigation is required, or
  * 1 to indicate that no firmware mitigation is required.

This patch complies with v1.2 of the firmware interfaces
specification (ARM DEN 0070A).

Change-Id: Ibc32d6620efdac6c340758ec502d95554a55f02a
Signed-off-by: default avatarDimitris Papastamos <dimitris.papastamos@arm.com>
      a205a56e
  3. 02 Mar, 2018 1 commit
  5. 01 Mar, 2018 3 commits
  7. 28 Feb, 2018 1 commit
  9. 27 Feb, 2018 2 commits
    • Jeenu Viswambharan's avatar
      TSPD: Register preempted SMC error code with EHF · 472be0f7
      Jeenu Viswambharan authored 
      

An earlier patch extended ehf_allow_ns_preemption() API to also register
an error code to offer to Non-secure when a Yielding SMC is preempted by
SDEI interrupt. In TSPD's case, register the error code TSP_PREEMPTED.

Change-Id: I31992b6651f80694e83bc5092b044ef7a3eda690
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      472be0f7
    • Jeenu Viswambharan's avatar
      SDEI: Pop dispatch context only after error checking · 8e3032f9
      Jeenu Viswambharan authored 
      

Currently, when the client attempts to do SDEI_EVENT_COMPLETE or
SDEI_EVENT_COMPLETE_AND_RESUME, the dispatcher pops off the outstanding
dispatch context for sanity check. There are however other checks
following this, which could potentially return failure. If that happens,
by popping the context, the dispatcher has inadvertently discarded a
valid context.

This patch fixes this bug by inspecting (not actually popping) the
outstanding context. The context is popped only after all error checks
are completed.

Change-Id: Ie199f6442f871a8177a8247a0c646543bad76d21
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      8e3032f9
  11. 22 Feb, 2018 1 commit
  13. 21 Feb, 2018 1 commit
  15. 14 Feb, 2018 1 commit
    • Antonio Nino Diaz's avatar
      Remove URLs from comments · fb1198b1
      Antonio Nino Diaz authored 
      

This fixes all defects according to MISRA Rule 3.1: "The character
sequences /* and // shall not be used within a comment". This affects
all URLs in comments, so they have been removed:

- The link in `sdei_state.c` can also be found in the documentation file
  `docs/sdei.rst`.

- The bug that the file `io_fip.c` talks about doesn't affect the
  currently supported version of GCC, so it doesn't make sense to keep
  the comment. Note that the version of GCC officially supported is the
  one that comes with Linaro Release 17.10, which is GCC 6.2.

- The link in `tzc400.c` was broken, and it didn't correctly direct to
  the Technical Reference Manual it should. The link has been replaced
  by the title of the document, which is more convenient when looking
  for the document.

Change-Id: I89f60c25f635fd4c008a5d3a14028f814c147bbe
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      fb1198b1
  17. 06 Feb, 2018 2 commits
    • Jeenu Viswambharan's avatar
      TSPD: Require NS preemption along with EL3 exception handling · 6027796f
      Jeenu Viswambharan authored 
      

At present, the build option TSP_NS_INTR_ASYNC_PREEMPT controls how
Non-secure interrupt affects TSPs execution. When TSP is executing:

  1. When TSP_NS_INTR_ASYNC_PREEMPT=0, Non-secure interrupts are received
     at the TSP's exception vector, and TSP voluntarily preempts itself.

  2. When TSP_NS_INTR_ASYNC_PREEMPT=1, Non-secure interrupts causes a
     trap to EL3, which preempts TSP execution.

When EL3 exception handling is in place (i.e.,
EL3_EXCEPTION_HANDLING=1), FIQs are always trapped to EL3. On a system
with GICv3, pending NS interrupts while TSP is executing will be
signalled as FIQ (which traps to EL3). This situation necessitates the
same treatment applied to case (2) above.

Therefore, when EL3 exception handling is in place, additionally
require that TSP_NS_INTR_ASYNC_PREEMPT is set to one 1.

Strictly speaking, this is not required on a system with GICv2, but the
same model is uniformly followed regardless, for simplicity.

Relevant documentation updated.

Change-Id: I928a8ed081fb0ac96e8b1dfe9375c98384da1ccd
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      6027796f
    • Jeenu Viswambharan's avatar
      TSPD: Explicitly allow NS preemption for Yielding SMCs · 1dd022ca
      Jeenu Viswambharan authored 
      

When EL3 exception handling is in effect (i.e.,
EL3_EXCEPTION_HANDLING=1), Non-secure interrupts can't preempt Secure
execution. However, for yielding SMCs, preemption by Non-secure
interupts is intended.

This patch therefore adds a call to ehf_allow_ns_preemption() before
dispatching a Yielding SMC to TSP.

Change-Id: Ia3a1ae252f3adc0f14e6d7e0502f251bdb349bdf
Signed-off-by: default avatarJeenu Viswambharan <jeenu.viswambharan@arm.com>
      1dd022ca
  19. 01 Feb, 2018 1 commit
  21. 29 Jan, 2018 1 commit
  23. 25 Jan, 2018 5 commits
  25. 10 Jan, 2018 1 commit
  27. 09 Jan, 2018 1 commit
  29. 08 Jan, 2018 2 commits
  31. 12 Dec, 2017 1 commit
    • Sandrine Bailleux's avatar
      SPM: Fix MM_COMMUNICATE_AARCH32/64 parameters · 4d2787ce
      Sandrine Bailleux authored 
      This partially reverts commit d6b532b5

, keeping only the fixes to
the assertions. The changes related to the order of arguments passed
to the secure partition were not correct and violated the
specification of the SP_EVENT_COMPLETE SMC.

This patch also improves the MM_COMMUNICATE argument validation.  The
cookie argument, as it comes from normal world, can't be trusted and thus
needs to always be validated at run time rather than using an assertion.

Also validate the communication buffer address and return
INVALID_PARAMETER if it is zero, as per the MM specification.

Fix a few typos in comments and use the "secure partition" terminology
rather than "secure payload".

Change-Id: Ice6b7b5494b729dd44611f9a93d362c55ab244f7
Signed-off-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
      4d2787ce
  33. 06 Dec, 2017 3 commits
  35. 05 Dec, 2017 2 commits
  37. 20 Nov, 2017 2 commits
  39. 15 Nov, 2017 2 commits
  41. 13 Nov, 2017 3 commits
  43. 10 Nov, 2017 1 commit
    • Antonio Nino Diaz's avatar
      SPM: Fix pointer to MP info in boot info struct · ff7d0805
      Antonio Nino Diaz authored 
      

The MP info struct is placed right after the boot info struct. However,
when calculating the address of the MP info, the size of the boot info
struct was being multiplied by the size of the MP boot info. This left
a big gap of empty space between the structs.

This didn't break any code because the boot info struct has a pointer to
the MP info struct. It was just wasting space.

Change-Id: I1668e3540d9173261968f6740623549000bd48db
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      ff7d0805
  45. 08 Nov, 2017 2 commits
    • Antonio Nino Diaz's avatar
      SPM: Introduce Secure Partition Manager · 2fccb228
      Antonio Nino Diaz authored 
      

A Secure Partition is a software execution environment instantiated in
S-EL0 that can be used to implement simple management and security
services. Since S-EL0 is an unprivileged exception level, a Secure
Partition relies on privileged firmware e.g. ARM Trusted Firmware to be
granted access to system and processor resources. Essentially, it is a
software sandbox that runs under the control of privileged software in
the Secure World and accesses the following system resources:

- Memory and device regions in the system address map.
- PE system registers.
- A range of asynchronous exceptions e.g. interrupts.
- A range of synchronous exceptions e.g. SMC function identifiers.

A Secure Partition enables privileged firmware to implement only the
absolutely essential secure services in EL3 and instantiate the rest in
a partition. Since the partition executes in S-EL0, its implementation
cannot be overly complex.

The component in ARM Trusted Firmware responsible for managing a Secure
Partition is called the Secure Partition Manager (SPM). The SPM is
responsible for the following:

- Validating and allocating resources requested by a Secure Partition.
- Implementing a well defined interface that is used for initialising a
  Secure Partition.
- Implementing a well defined interface that is used by the normal world
  and other secure services for accessing the services exported by a
  Secure Partition.
- Implementing a well defined interface that is used by a Secure
  Partition to fulfil service requests.
- Instantiating the software execution environment required by a Secure
  Partition to fulfil a service request.

Change-Id: I6f7862d6bba8732db5b73f54e789d717a35e802f
Co-authored-by: default avatarDouglas Raillard <douglas.raillard@arm.com>
Co-authored-by: default avatarSandrine Bailleux <sandrine.bailleux@arm.com>
Co-authored-by: default avatarAchin Gupta <achin.gupta@arm.com>
Co-authored-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      2fccb228
    • Antonio Nino Diaz's avatar
      spd: Use `ENABLE_ASSERTIONS` instead of `DEBUG` · 92cad5fa
      Antonio Nino Diaz authored 
      A line in the upstream SPDs is only compiled in in `DEBUG` builds. This
line is used to help with assertions and so assertion failures can
happen in release builds with assertions enabled. Use
`ENABLE_ASSERTIONS` instead of `DEBUG`.

This bug was introduced in commit aa61368e

, which introduced the build
option `ENABLE_ASSERTIONS`.

Change-Id: I7977df9c89c68677b00099b2a1926fa3cb0937c6
Signed-off-by: default avatarAntonio Nino Diaz <antonio.ninodiaz@arm.com>
      92cad5fa