GitLab

This would enable us to write semantically sensible code.

Change-Id: Ie7c75f9c024f671a037448f5c0922174fff3f0ce
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Fix defects of MISRA C-2012 rules 8.13, 10.1, 10.3, 10.4, 10.8, 11.6,
14.4, 15.7, 17.8, 20.10, 20.12, 21.1 and Directive 4.9.

Change-Id: I7ff61e71733908596dbafe2e99d99b4fce9765bd
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

MISRA C-2012 Rules 10.1, 10.3, 17.8 and 20.7.

Change-Id: I3980bd2a1d845559af4bbe2887a0250d0506a064
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Also change header guards to fix defects of MISRA C-2012 Rule 21.1.

Change-Id: Ied0d4b0e557ef6119ab669d106d2ac5d99620c57
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Fix instances of MISRA C-2012 Rule 10.1 and 21.1.

Change-Id: I5676edede0703481e3635be0bc4a635df8e48f5e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Fix MISRA C-2012 Rules 8.2 and 21.1.

Change-Id: I7f41fe76fe16399734d11847ab601ad8eb78df1a
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Fix MISRA C-2012 Directive 4.9 and Rule 21.1 defects.

Change-Id: I96c216317d38741ee632d2640cd7b36e6723d5c2
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Add missing parentheses to fix MISRA C-2012 Rule 12.1.

Also, the result of a comparison is an essentially boolean value, it
isn't needed to return 1 or 0 depending on it.

Also, fix header guards (MISRA C-2012 Rule 21.1).

Change-Id: I90c0bcdeb2787c1ca659fc9a981808ece7958de3
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

utils_def.h already has U() and ULL(), but not UL(), which is needed for
types like uinptr_t and u_register_t.

Also added L() and LL() for signed values.

Change-Id: I0654df80d57149ff49507c52f1b27f3d500486a0
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Uncontainable errors are the most severe form of errors, which typically
mean that the system state can't be trusted any more. This further means
that normal error recovery process can't be followed, and an orderly
shutdown of the system is often desirable.

This patch allows for the platform to define a handler for Uncontainable
errors received. Due to the nature of Uncontainable error, the handler
is expected to initiate an orderly shutdown of the system, and therefore
is not expected to return. A default implementation is added which falls
back to platform unhandled exception.

Also fix ras_arch.h header guards.

Change-Id: I072e336a391a0b382e77e627eb9e40729d488b55
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Add definition of EL1 L2 Auxilary Control register to
Cortex A72 library headers.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>

Change-Id: I98f23f6cebcf984b57efc5449b75ff702e1984a0
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Define the values as unsigned int or unsigned long long based on the
actual size of the register. This prevents subtle issues caused by
having a type that is too small. For example:

    #define OPTION_ENABLE 0x3
    #define OPTION_SHIFT  32

    uint64_t mask = OPTION_ENABLE << OPTION_SHIFT;

Because OPTION_ENABLE fits in an int, the value is considered an int.
This means that, after shifting it 32 places to the left, the final
result is 0. The correct way to define the values is:

    #define OPTION_ENABLE ULL(0x3)
    #define OPTION_SHIFT  U(32)

In this case, the compiler is forced to use a 64 bit value from the
start, so shifting it 32 places to the left results in the expected
value.

Change-Id: Ieaf2ffc2d8caa48c622db011f2aef549e713e019
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: Ifea46da46d1bfd01b341acfad75df5bcab48a204
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This library can be used in other projects. All comments that talk about
the Trusted Firmware should be talking about the library itself.

Change-Id: I3b98d42f7132be72c1f8a4900acfaa78dbd2daa2
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This allows other parts of the code to reuse it. No functional changes.

Change-Id: Ib052ae235c422d9179958bd3016c3e678779ae9b
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Most registers are 64-bit wide, even in AArch32 mode:

- MAIR_ELx is equivalent to MAIR0 and MAIR1.
- TTBR is 64 bit in both AArch64 and AArch32.

The only difference is the TCR register, which is 32 bit in AArch32 and
in EL3 in AArch64. For consistency with the rest of ELs in AArch64, it
makes sense to also have it as a 64-bit value.

Change-Id: I2274d66a28876702e7085df5f8aad0e7ec139da9
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

The Exception Level is now detected at runtime. This means that it is not
needed to hardcode the EL used by each image.

This doesn't result in a substantial increase of the image size because
the initialization functions that aren't used are garbage-collected by
the linker.

In AArch32 the current EL has been changed from EL3 to EL1 because the
the AArch32 PL1&0 translation regime behaves more like the AArch64 EL1&0
translation regime than the EL3 one.

Change-Id: I941404299ebe7666ca17619207c923b49a55cb73
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Change-Id: Ic0486131c493632eadf329f80b0b5904aed5e4ef
Signed-off-by: Joel Hutton <joel.hutton@arm.com>
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Change-Id: I2c4b06423fcd96af9351b88a5e2818059f981f1b
Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

This check was added to ensure the correct behaviour of fill_constants
macro. This macro has been verified and it is known his correct
behaviour. The check generates an error when the clang assembler is
used, so it is better to remove the check.

Change-Id: I3447ff9e9e5ee5cf0502f65e53c3d105d9396b8b
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

This directive is not implemented by clang assembler. The traditional
way to implement structs in assembly is using two macros for every field,
one for the offset, and another one for the size. For every field, the
offset can be calculated using the size and offset of the previous field.

Change-Id: Iacc6781e8f302fb925898737b8e85ab4e88a51cc
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

Rule 8.3: All declarations of an object or function shall
              use the same names and type qualifiers.

Fixed for:
	make DEBUG=1 PLAT=juno ARCH=aarch32 AARCH32_SP=sp_min RESET_TO_SP_MIN=1 JUNO_AARCH32_EL3_RUNTIME=1 bl32

Change-Id: Ia34f5155e1cdb67161191f69e8d1248cbaa39e1a
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

Casting a pointer to a struct uuid into a pointer to uint32_t may
result in a pointer that is not correctly aligned, which constitutes
an undefined behaviour. In the case of TF, this also generates a data
abort because alignment fault checking is enabled (through the SCTLR.A
bit).

This patch modifies the SMC_UUID_RET() macro to read the uuid
structure without any pointer aliasing. A helper function then
combines every set of 4 bytes into a 32-bit value suitable to be
returned through the x0-x3 registers.

This fixes a violation of MISRA rule 11.3.

Change-Id: I53ee73bb4cb332f4d8286055ceceb6f347caa080
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>

Instead of having one big file with all the code, it's better to have
a few smaller files that are more manageable:

- xlat_tables_core.c: Code related to the core functionality of the
  library (map and unmap regions, initialize xlat context).
- xlat_tables_context.c: Instantiation of the active image context
  as well as APIs to manipulate it.
- xlat_tables_utils.c: Helper code that isn't part of the core
  functionality (change attributes, debug print messages).

Change-Id: I3ea956fc1afd7473c0bb5e7c6aab3b2e5d88c711
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

At present, the function provided by the translation library to enable
MMU constructs appropriate values for translation library, and programs
them to the right registers. The construction of initial values,
however, is only required once as both the primary and secondaries
program the same values.

Additionally, the MMU-enabling function is written in C, which means
there's an active stack at the time of enabling MMU. On some systems,
like Arm DynamIQ, having active stack while enabling MMU during warm
boot might lead to coherency problems.

This patch addresses both the above problems by:

  - Splitting the MMU-enabling function into two: one that sets up
    values to be programmed into the registers, and another one that
    takes the pre-computed values and writes to the appropriate
    registers. With this, the primary effectively calls both functions
    to have the MMU enabled, but secondaries only need to call the
    latter.

  - Rewriting the function that enables MMU in assembly so that it
    doesn't use stack.

This patch fixes a bunch of MISRA issues on the way.

Change-Id: I0faca97263a970ffe765f0e731a1417e43fbfc45
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

The values defined in this type are used in logical operations, which
goes against MISRA Rule 10.1: "Operands shall not be of an inappropriate
essential type".

Now, `unsigned int` is used instead. This also allows us to move the
dynamic mapping bit from 30 to 31. It was an undefined behaviour in the
past because an enum is signed by default, and bit 31 corresponds to the
sign bit. It is undefined behaviour to modify the sign bit. Now, bit 31
is free to use as it was originally meant to be.

mmap_attr_t is now defined as an `unsigned int` for backwards
compatibility.

Change-Id: I6b31218c14b9c7fdabebe432de7fae6e90a97f34
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

This patch introduces setjmp() and ongjmp() primitives to enable
standard setjmp/longjmp style execution. Both APIs parameters take a
pointer to struct jmpbuf type, which hosts CPU registers saved/restored
during jump.

As per the standard usage:

  - setjmp() return 0 when a jump is setup; and a non-zero value when
    returning from jump.

  - The caller of setjmp() must not return, or otherwise update stack
    pointer since.

Change-Id: I4af1d32e490cfa547979631b762b4cba188d0551
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

Currently TF-A doesn't initialise CNTFRQ register in CNTCTLBase
frame of the system timer. ARM ARM states that "The instance of
the register in the CNTCTLBase frame must be programmed with this
value as part of system initialization."

The psci_arch_setup() updates the CNTFRQ system register but
according to the ARM ARM, this instance of the register is
independent of the memory mapped instance. This is only an issue
for Normal world software which relies on the memory mapped
instance rather than the system register one.

This patch resolves the issue for ARM platforms.

The patch also solves a related issue on Juno, wherein
CNTBaseN.CNTFRQ can be written and does not reflect the value of
the register in CNTCTLBase frame. Hence this patch additionally
updates CNTFRQ register in the Non Secure frame of the CNTBaseN.

Fixes ARM-Software/tf-issues#593

Change-Id: I09cebb6633688b34d5b1bc349fbde4751025b350
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

When applying some MISRA rules, lots of issues are raised with BIT macro
on AARCH32, and cast on uint32_t would be required (Rule 10.3).
The macros BIT_32 and BIT_64 are then created for 32bit and 64bit.
Then the BIT macro defaults on BIT_64 on AARCH64,
and on BIT_32 on AARCH32.
Signed-off-by: Yann Gautier <yann.gautier@st.com>

Import GENMASK_32 and GENMASK_64 macros from optee-os (permissive license).
And default GENMASK is set to GENMASK_32 for AARCH32,
and to GENMASK_64 for 64bit arch.

fixes arm-software/tf-issues#596
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>

RFC4122 defines that fields are stored in network order (big endian),
but TF-A stores them in machine order (little endian by default in TF-A).
We cannot change the future UUIDs that are already generated, but we can store
all the bytes using arrays and modify fiptool to generate the UUIDs with
the correct byte order.

Change-Id: I97be2d3168d91f4dee7ccfafc533ea55ff33e46f
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>

The function xlat_arch_is_granule_size_supported() can be used to check
if a specific granule size is supported. In Armv8, AArch32 only supports
4 KiB pages. AArch64 supports 4 KiB, 16 KiB or 64 KiB depending on the
implementation, which is detected at runtime.

The function xlat_arch_get_max_supported_granule_size() returns the max
granule size supported by the implementation.

Even though right now they are only used by SPM, they may be useful in
other places in the future. This patch moves the code currently in SPM
to the xlat tables lib so that it can be reused.

Change-Id: If54624a5ecf20b9b9b7f38861b56383a03bbc8a4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

Use a _ prefix for Macro arguments to prevent that argument from
hiding variables of the same name in the outer scope

Rule 5.3: An identifier declared in an inner scope shall not
          hide an identifier declared in an outer scope

Fixed For:
    make LOG_LEVEL=50 PLAT=fvp

Change-Id: I67b6b05cbad4aeca65ce52981b4679b340604708
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>

When dynamic mitigation is used, the SDEI handler is required to
execute with the mitigation enabled by default, regardless of the
mitigation state for lower ELs.  This means that if the kernel or
hypervisor explicitly disables the mitigation and then later when the
event is dispatched, the dispatcher will remember the mitigation state
for the lower ELs but force the mitigation to be on during the SDEI
handler execution.  When the SDEI handler returns, it will restore the
mitigation state.

This behaviour is described in "Firmware interfaces for mitigating
cache speculation vulnerabilities System Software on Arm Systems"[0].

[0] https://developer.arm.com/cache-speculation-vulnerability-firmware-specification



Change-Id: I8dd60b736be0aa9e832b0f92d67a401fdeb417f4
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

The Cortex-A76 implements SMCCC_ARCH_WORKAROUND_2 as defined in
"Firmware interfaces for mitigating cache speculation vulnerabilities
System Software on Arm Systems"[0].

Dynamic mitigation for CVE-2018-3639 is enabled/disabled by
setting/clearning bit 16 (Disable load pass store) of `CPUACTLR2_EL1`.

NOTE: The generic code that implements dynamic mitigation does not
currently implement the expected semantics when dispatching an SDEI
event to a lower EL.  This will be fixed in a separate patch.

[0] https://developer.arm.com/cache-speculation-vulnerability-firmware-specification



Change-Id: I8fb2862b9ab24d55a0e9693e48e8be4df32afb5a
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

The workaround uses the instruction patching feature of the Ares cpu.

Change-Id: I868fce0dc0e8e41853dcce311f01ee3867aabb59
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Change-Id: Ia170c12d3929a616ba80eb7645c301066641f5cc
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>

Both Cortex-Ares and Cortex-A76 CPUs use the ARM DynamIQ Shared Unit
(DSU).  The power-down and power-up sequences are therefore mostly
managed in hardware, and required software operations are simple.

Change-Id: I3a9447b5bdbdbc5ed845b20f6564d086516fa161
Signed-off-by: Isla Mitchell <isla.mitchell@arm.com>

This function can be currently accessed through the wrappers
cm_init_context_by_index() and cm_init_my_context(). However, they only
work on contexts that are associated to a CPU.

By making this function public, it is possible to set up a context that
isn't associated to any CPU. For consistency, it has been renamed to
cm_setup_context().

Change-Id: Ib2146105abc8137bab08745a8adb30ca2c4cedf4
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>