- 20 Jun, 2019 2 commits
-
-
John Tsichritzis authored
-
Soby Mathew authored
-
- 19 Jun, 2019 1 commit
-
-
John Tsichritzis authored
* changes: fdts: stm32mp1: realign device tree files with internal devs stm32mp1: increase device tree size to 20kB stm32mp1: make dt_get_stdout_node_offset() static stm32mp1: use unsigned values for SDMMC defines stm32mp1: remove useless LIBFDT_SRCS from PLAT_BL_COMMON_SOURCES stm32mp1: update doc for U-Boot compilation stm32mp1: add general SYSCFG management stm32mp1: move stm32_get_gpio_bank_clock() to private file clk: stm32mp1: correctly handle Clock Spreading Generator clk: stm32mp1: use defines for mask values in stm32mp1_clk_sel array clk: stm32mp1: move oscillator functions to generic file arch: add some defines for generic timer registers
-
- 17 Jun, 2019 37 commits
-
-
John Tsichritzis authored
* changes: rcar_gen3: drivers: qos: Move QoS drivers out of staging rcar_gen3: drivers: qos: V3M: Configure DBSC QoS from a table rcar_gen3: drivers: qos: E3: Configure DBSC QoS from a table rcar_gen3: drivers: qos: D3: Configure DBSC QoS from a table rcar_gen3: drivers: qos: M3N: Configure DBSC QoS from a table rcar_gen3: drivers: qos: M3W: Configure DBSC QoS from a table rcar_gen3: drivers: qos: H3: Configure DBSC QoS from a table rcar_gen3: drivers: qos: Add function to configure DBSC QoS settings from a table rcar_gen3: drivers: qos: Fix checkpatch issues rcar_gen3: drivers: qos: V3M: Drop useless comments rcar_gen3: drivers: qos: V3M: Convert mstat table to uint64_t rcar_gen3: drivers: qos: V3M: Factor out mstat fix into separate file rcar_gen3: drivers: qos: V3M: Use common register definition rcar_gen3: drivers: qos: E3: Drop extra level of nesting rcar_gen3: drivers: qos: E3: Use common register definition rcar_gen3: drivers: qos: D3: Replace ad-hoc register addresses with macros rcar_gen3: drivers: qos: D3: Drop MD pin check rcar_gen3: drivers: qos: D3: Make DBSC settings local to dbsc_setting() rcar_gen3: drivers: qos: D3: Drop useless comments rcar_gen3: drivers: qos: D3: Convert mstat table to uint64_t rcar_gen3: drivers: qos: D3: Factor out mstat fix into separate file rcar_gen3: drivers: qos: D3: Use common register definition rcar_gen3: drivers: qos: M3N: Fix checkpatch issues rcar_gen3: drivers: qos: M3N: Drop MD pin check rcar_gen3: drivers: qos: M3N: Drop useless comments rcar_gen3: drivers: qos: M3N: Drop extra level of nesting rcar_gen3: drivers: qos: M3N: Use common register definition rcar_gen3: drivers: qos: M3W: Fix checkpatch issues rcar_gen3: drivers: qos: M3W: Drop MD pin check rcar_gen3: drivers: qos: M3W: Drop useless comments rcar_gen3: drivers: qos: M3W: Drop extra level of nesting rcar_gen3: drivers: qos: M3W: Convert mstat table to uint64_t rcar_gen3: drivers: qos: M3W: Factor out mstat fix into separate file rcar_gen3: drivers: qos: M3W: Use common register definition rcar_gen3: drivers: qos: H3: Fix checkpatch issues rcar_gen3: drivers: qos: H3: Drop MD pin check rcar_gen3: drivers: qos: H3: Drop useless comments rcar_gen3: drivers: qos: H3: Drop extra level of nesting rcar_gen3: drivers: qos: H3: Convert mstat table to uint64_t rcar_gen3: drivers: qos: H3: Factor out mstat fix into separate file rcar_gen3: drivers: qos: H3: Use common register definition rcar_gen3: console: Convert to multi-console API
-
Marek Vasut authored
Now that QoS drivers are cleaned up , move them out of staging. Signed-off-by:Marek Vasut <marek.vasut+renesas@gmail.com> Change-Id: If61ab2157c30b8f5a6b91d2c56ddbb9098ef99e8
-
Marek Vasut authored
Convert the DBSC QoS setting function to a simple table of register-value pairs and pass it to common rcar_qos_dbsc_setting() to write those values to matching registers. Signed-off-by: -
Marek Vasut authored
Convert the DBSC QoS setting function to a simple table of register-value pairs and pass it to common rcar_qos_dbsc_setting() to write those values to matching registers. Signed-off-by: -
Marek Vasut authored
Convert the DBSC QoS setting function to a simple table of register-value pairs and pass it to common rcar_qos_dbsc_setting() to write those values to matching registers. Signed-off-by: -
Marek Vasut authored
Convert the DBSC QoS setting function to a simple table of register-value pairs and pass it to common rcar_qos_dbsc_setting() to write those values to matching registers. Signed-off-by: -
Marek Vasut authored
Convert the DBSC QoS setting function to a simple table of register-value pairs and pass it to common rcar_qos_dbsc_setting() to write those values to matching registers. Signed-off-by: -
Marek Vasut authored
Convert the DBSC QoS setting function to a simple table of register-value pairs and pass it to common rcar_qos_dbsc_setting() to write those values to matching registers. Signed-off-by: -
Marek Vasut authored
The DBSC QoS settings can be programmed by iterating over a table with register-value pairs and writing those to the registers, add function to do just that. Subsequent patches will convert the DBSC QoS setting functions for each SoC to this new function. Signed-off-by: -
Marek Vasut authored
Fix checkpatch issues, clean up macro indentation. No functional change. Signed-off-by: -
Marek Vasut authored
Drop useless comments in dbsc_setting(). No functional change. Signed-off-by: -
Marek Vasut authored
Convert the mstat table from a complex structure to simple sequence of uint64_t values, since the structure described just that and the loop can operate over incrementing sequence of addresses just fine. Signed-off-by: -
Marek Vasut authored
Pull out the mstat fix array into separate file, to align the structure of the driver with the other SoCs. No functional change. Signed-off-by: -
Marek Vasut authored
Use common qos_regs.h instead of a local copy in the V3M QoS init. Fill missing registers into qos_regs.h . No functional change. Signed-off-by: -
Marek Vasut authored
The extra level of nesting is not necessary, drop it. No functional change. Signed-off-by: -
Marek Vasut authored
Use common qos_regs.h instead of a local copy in the E3 QoS init. No functional change. Signed-off-by: -
Marek Vasut authored
Replace the remaining ad-hoc register addresses with proper macros. Signed-off-by: -
Marek Vasut authored
The DBSC_SCFCTST2 is always written with the same value, no matter what the MD pin value is, drop the entire check and just write the register with the one and only possible value. Signed-off-by: -
Marek Vasut authored
Move the DBSC write enabling and disabling to dbsc_setting() function, to make it local, instead of having it all over the code. Signed-off-by: -
Marek Vasut authored
Drop useless comments in dbsc_setting(). No functional change. Signed-off-by: -
Marek Vasut authored
Convert the mstat table from a complex structure to simple sequence of uint64_t values, since the structure described just that and the loop can operate over incrementing sequence of addresses just fine. Signed-off-by: -
Marek Vasut authored
Pull out the mstat fix array into separate file, to align the structure of the driver with the other SoCs. No functional change. Signed-off-by: -
Marek Vasut authored
Use common qos_regs.h instead of a local copy in the D3 QoS init. Fill missing registers into qos_regs.h . No functional change. Signed-off-by: -
Marek Vasut authored
Fix checkpatch issues, clean up macro indentation. No functional change. Signed-off-by: -
Marek Vasut authored
The DBSC_SCFCTST2 is always written with the same value, no matter what the MD pin value is, drop the entire check and just write the register with the one and only possible value. Signed-off-by: -
Marek Vasut authored
Drop useless comments in dbsc_setting(). No functional change. Signed-off-by: -
Marek Vasut authored
The extra level of nesting is not necessary, drop it. No functional change. Signed-off-by: -
Marek Vasut authored
Use common qos_regs.h instead of a local copy in the M3N QoS init. No functional change. Signed-off-by: -
Marek Vasut authored
Fix checkpatch issues, clean up macro indentation. No functional change. Signed-off-by: -
Marek Vasut authored
The DBSC_SCFCTST2 is always written with the same value, no matter what the MD pin value is, drop the entire check and just write the register with the one and only possible value. Signed-off-by: -
Marek Vasut authored
Drop useless comments in dbsc_setting(). No functional change. Signed-off-by: -
Marek Vasut authored
The extra level of nesting is not necessary, drop it. No functional change. Signed-off-by: -
Marek Vasut authored
Convert the mstat table from a complex structure to simple sequence of uint64_t values, since the structure described just that and the loop can operate over incrementing sequence of addresses just fine. Signed-off-by: -
Marek Vasut authored
Pull out the mstat fix array into separate file, to align the structure of the driver with the other SoCs. No functional change. Signed-off-by: -
Marek Vasut authored
Use common qos_regs.h instead of a local copy in the M3W QoS init. Fill missing registers into qos_regs.h . No functional change. Signed-off-by: -
Yann Gautier authored
Update DDR parameters to version 1.45. Remove useless sdmmc1_dir_pins_b node. Add USART3 and UART7 nodes. Correct a PMIC value for USB regulator. Add TIMER12, TIMER15, CRYP, HASH and USBOTG_HS nodes. Update DTSI file for SDMMC compatible, but overwrite it with the former name. Move BSEC board_id node to boards DTS files, as this OTP is specific to STMicroelectronics boards. Change-Id: If4d2fe090c6a8368afe8e21e5ac70579911d3939 Signed-off-by:Yann Gautier <yann.gautier@st.com>
-
Yann Gautier authored
Change-Id: Idee966b6434aa038e54b6e7176749a7b65bdbe84 Signed-off-by:
-
