GitLab

cpu_idx is used as mix of `unsigned int` and `signed int` in code
with typecasting at some places. This change is to unify the
cpu_idx as `unsigned int` as underlying API;s `plat_my_core_pos`
returns `unsigned int`

It was discovered via coverity issue CID 354715
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I4f0adb0c596ff1177210c5fe803bff853f2e54ce

This patch fixes an issue when secure world timing information
can be leaked because Secure Cycle Counter is not disabled.
For ARMv8.5 the counter gets disabled by setting MDCR_El3.SCCD
bit on CPU cold/warm boot.
For the earlier architectures PMCR_EL0 register is saved/restored
on secure world entry/exit from/to Non-secure state, and cycle
counting gets disabled by setting PMCR_EL0.DP bit.
'include\aarch64\arch.h' header file was tided up and new
ARMv8.5-PMU related definitions were added.

Change-Id: I6f56db6bc77504634a352388990ad925a69ebbfa
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

ISB instruction was removed from the N1 1043202 Errata Workaround [1], this
fix is adding the ISB instruction back in.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html

Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I74eac7f6ad38991c36d423ad6aa44558033ad388

GCC diagnostics were added to ignore array boundaries, instead
of ignoring GCC warning current code will check for array boundaries
and perform and array update only for valid elements.

Resolves: `CID 246574` `CID 246710` `CID 246651`
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: I7530ecf7a1707351c6ee87e90cc3d33574088f57

This patch fixes FVP_Base_AEMv8A model hang issue with
ARMv8.4+ with cache modelling enabled configuration.
Incorrect L1 cache flush operation to PoU, using CLIDR_EL1
LoUIS field, which is required by the architecture to be
zero for ARMv8.4-A with ARMv8.4-S2FWB feature is replaced
with L1 to L2 and L2 to L3 (if L3 is present) cache flushes.
FVP_Base_AEMv8A model can be configured with L3 enabled by
setting `cluster0.l3cache-size` and `cluster1.l3cache-size`
to non-zero values, and presence of L3 is checked in
`aem_generic_core_pwr_dwn` function by reading
CLIDR_EL1.Ctype3 field value.

Change-Id: If3de3d4eb5ed409e5b4ccdbc2fe6d5a01894a9af
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

Coverity has identified that the __aeabi_imod function will loop forever
if the denominator is not a power of 2, which is probably not the
desired behaviour.

The functions in the rest of the file are compiler implementations of
division if ARMv7 does not implement division which is permitted by the
spec. However, while most of the functions in the file are documented
and referenced in other places online, __aeabi_uimod and __aeabi_imod
are not. For this reason, these functions have been removed from the
code base, which also removes the Coverity error.

Change-Id: I20066d72365329a8b03a5536d865c4acaa2139ae
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

This patch simply splits off the increment of next_xlat into a separate
statement to ensure consistent behaviour if the assert was to ever be
removed.

Change-Id: I827f601ccea55f4da9442048419c9b8cc0c5d22e
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

This ensures that probe_data starts with a reasonable default, as
opposed to whatever was left on the stack.

Change-Id: I5550efea5e2bec7717f9fa063cb11e6a7005cce5
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

NOTE: AARCH32/AARCH64 macros are now deprecated in favor of __aarch64__.

All common C compilers pre-define the same macros to signal which
architecture the code is being compiled for: __arm__ for AArch32 (or
earlier versions) and __aarch64__ for AArch64. There's no need for TF-A
to define its own custom macros for this. In order to unify code with
the export headers (which use __aarch64__ to avoid another dependency),
let's deprecate the AARCH32 and AARCH64 macros and switch the code base
over to the pre-defined standard macro. (Since it is somewhat
unintuitive that __arm__ only means AArch32, let's standardize on only
using __aarch64__.)

Change-Id: Ic77de4b052297d77f38fc95f95f65a8ee70cf200
Signed-off-by: Julius Werner <jwerner@chromium.org>

NOTE: __ASSEMBLY__ macro is now deprecated in favor of __ASSEMBLER__.

All common C compilers predefine a macro called __ASSEMBLER__ when
preprocessing a .S file. There is no reason for TF-A to define it's own
__ASSEMBLY__ macro for this purpose instead. To unify code with the
export headers (which use __ASSEMBLER__ to avoid one extra dependency),
let's deprecate __ASSEMBLY__ and switch the code base over to the
predefined standard.

Change-Id: Id7d0ec8cf330195da80499c68562b65cb5ab7417
Signed-off-by: Julius Werner <jwerner@chromium.org>

Change-Id: Ie0a94783d0c8e111ae19fd592304e6485f04ca29
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>

The features of the previously existing gentbl, genvar and genwrappers
scripts were reimplemented in the romlib_generator.py Python script.
This resulted in more readable and maintainable code and the script
introduces additional features that help dependency handling in
makefiles. The assembly templates were separated from the script logic
and were collected in the 'templates' directory.

The targets and their dependencies were reorganized in the makefile and
the dependency handling of included index files is possible now.
Incremental build is available in case of modifying the index files.
Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: I79f65fab9dc5c70d1f6fc8f57b2a3009bf842dc5

This patch adds some common helper code to support a lightweight
platform parameter passing framework between BLs that has already been
used on Rockchip platforms but is more widely useful to others as well.
It can be used as an implementation for the SoC firmware configuration
file mentioned in the docs, and is primarily intended for platforms
that only require a handful of values to be passed and want to get by
without a libfdt dependency. Parameters are stored in a linked list and
the parameter space is split in generic and vendor-specific parameter
types. Generic types will be handled by this code whereas
vendor-specific types have to be handled by a vendor-specific handler
function that gets passed in.

Change-Id: If3413d44e86b99d417294ce8d33eb2fc77a6183f
Signed-off-by: Julius Werner <jwerner@chromium.org>

Change-Id: Iab767e9937f5c6c8150953fcdc3b37e8ee83fa63
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

This patch enables MTE for Normal world if the CPU suppors it. Enabling
MTE for secure world will be done later.

Change-Id: I9ef64460beaba15e9a9c20ab02da4fb2208b6f7d
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

This consists of ensuring that the left operand of each shift is
unsigned when the operation might overflow into the sign bit.

Change-Id: Iddd6f38139a4c6e500468b4fc48d04e0939f574e
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

Change-Id: I755e4c42242d9a052570fd1132ca3d937acadb13
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>

Replacing ISB instructions in each Errata workaround with a single ISB
instruction before the RET in the reset handler.

Change-Id: I08afabc5b98986a6fe81664cd13822b36cab786f
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>

Neoverse N1 erratum 1275112 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUACTLR_EL1 system register, which delays instruction fetch after
branch misprediction.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html



Change-Id: If7fe55fe92e656fa6aea12327ab297f2e6119833
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>

Neoverse N1 erratum 1262888 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUECTLR_EL1 system register, which disables the MMU hardware prefetcher.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html



Change-Id: Ib733d748e32a7ea6a2783f3d5a9c5e13eee01105
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>

Neoverse N1 erratum 1262606 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUACTLR_EL1 system register, which delays instruction fetch after
branch misprediction.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html



Change-Id: Idd980e9d5310232d38f0ce272862e1fb0f02ce9a
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>

Neoverse N1 erratum 1257314 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUACTLR3_EL1 system register, which prevents parallel
execution of divide and square root instructions.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html



Change-Id: I54f0f40ff9043efee40d51e796b92ed85b394cbb
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>

Neoverse N1 erratum 1220197 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set two bits in the implementation defined
CPUECTLR_EL1 system register, which disables write streaming to the L2.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html



Change-Id: I9c3373f1b6d67d21ee71b2b80aec5e96826818e8
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>

Neoverse N1 erratum 1207823 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUACTLR2_EL1 system register.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html



Change-Id: Ia932337821f1ef0d644db3612480462a8d924d21
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>

Neoverse N1 erratum 1165347 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set two bits in the implementation defined
CPUACTLR2_EL1 system register.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html



Change-Id: I163d0ea00578245c1323d2340314cdc3088c450d
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>

Neoverse N1 erratum 1130799 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUACTLR2_EL1 system register.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html



Change-Id: I252bc45f9733443ba0503fefe62f50fdea61da6d
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>

Neoverse N1 erratum 1073348 is a Cat B erratum [1],
present in older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined
CPUACTLR_EL1 system register, which disables static prediction.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdoc-466751330-10325/index.html



Change-Id: I674126c0af6e068eecb379a190bcf7c75dcbca8e
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>

The previous implementation could behave incorrectly because of the sign
extension of the char when compared to the int.

Change-Id: I397838b0ec87a6f1af6972d022a8c19a5184b447
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

Change-Id: Idd08914bcb945ad6aa0621e594c95df88ee8f9c8
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

When acquiring or releasing the power domain locks for a given CPU the
parent nodes are looked up by walking the up the PD tree list on both the
acquire and release path, only one set of lookups is needed. Fetch the
parent nodes first and pass this list into both the acquire and release
functions to avoid the double lookup.

This also allows us to not have to do this lookup after coherency has
been exited during the core power down sequence. The shared struct
psci_cpu_pd_nodes is not placed in coherent memory like is done
for psci_non_cpu_pd_nodes and doing so would negatively affect
performance. With this patch we remove the need to have it in coherent
memory by moving the access out of psci_release_pwr_domain_locks().
Signed-off-by: Andrew F. Davis <afd@ti.com>
Change-Id: I7b9cfa9d31148dea0f5e21091c8b45ef7fe4c4ab

Neoverse N1 erratum 1315703 is a Cat A (rare) erratum [1], present in
older revisions of the Neoverse N1 processor core.
The workaround is to set a bit in the implementation defined CPUACTLR2_EL1
system register, which will disable the load-bypass-store feature.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.pjdocpjdoc-466751330-1032/index.html



Change-Id: I5c708dbe0efa4daa0bcb6bd9622c5efe19c03af9
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

We previously left our caches on during power-down to prevent any
non-caching accesses to memory that is cached by other cores. Now with
the last accessed areas all being marked as non-cached by
USE_COHERENT_MEM we can rely on that to workaround our interconnect
issues. Remove the old workaround.

Change-Id: Idadb7696d1449499d1edff4f6f62ab3b99d1efb7
Signed-off-by: Andrew F. Davis <afd@ti.com>

Some cores support only AArch64 mode. In those cores, only a limited
subset of the AArch32 system registers are implemented. Hence, if TF-A
is supposed to run on AArch64-only cores, it must be compiled with
CTX_INCLUDE_AARCH32_REGS=0.

Currently, the default settings for compiling TF-A are with the AArch32
system registers included. So, if we compile TF-A the default way and
attempt to run it on an AArch64-only core, we only get a runtime panic.

Now a compile-time check has been added to ensure that this flag has the
appropriate value when AArch64-only cores are included in the build.

Change-Id: I298ec550037fafc9347baafb056926d149197d4c
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

The workaround is added to the Cortex-A55 cpu specific file. The
workaround is disabled by default and have to be explicitly enabled by
the platform integrator.

Change-Id: I3e6fd10df6444122a8ee7d08058946ff1cc912f8
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>

This patch adds the functionality needed for platforms to provide
Branch Target Identification (BTI) extension, introduced to AArch64
in Armv8.5-A by adding BTI instruction used to mark valid targets
for indirect branches. The patch sets new GP bit [50] to the stage 1
Translation Table Block and Page entries to denote guarded EL3 code
pages which will cause processor to trap instructions in protected
pages trying to perform an indirect branch to any instruction other
than BTI.
BTI feature is selected by BRANCH_PROTECTION option which supersedes
the previous ENABLE_PAUTH used for Armv8.3-A Pointer Authentication
and is disabled by default. Enabling BTI requires compiler support
and was tested with GCC versions 9.0.0, 9.0.1 and 10.0.0.
The assembly macros and helpers are modified to accommodate the BTI
instruction.
This is an experimental feature.
Note. The previous ENABLE_PAUTH build option to enable PAuth in EL3
is now made as an internal flag and BRANCH_PROTECTION flag should be
used instead to enable Pointer Authentication.
Note. USE_LIBROM=1 option is currently not supported.

Change-Id: Ifaf4438609b16647dc79468b70cd1f47a623362e
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

When TF-A is compiled with BTI enabled, the branches in the ROMLIB
jumptable must be preceded by a "bti j" instruction.

Moreover, when the additional "bti" instruction is inserted, the
jumptable entries have a distance of 8 bytes between them instead of 4.
Hence, the wrappers are also modified accordinly.

If TF-A is compiled without BTI enabled, the ROMLIB jumptable and
wrappers are generated as before.

Change-Id: Iaa59897668f8e59888d39046233300c2241d8de7
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

* Optimization flags were only provided for debug build.
* Set optimisation level to -O1
* Remove CFLAGS which is never used for romlib
* Remove the ignored -g flag from LDFLAGS

Change-Id: Id4b69026d8a322ed4cb0acf06c350f13d31571ad
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>

Examine the ID_AA64PFR1_EL1 bits 7:4 to see if speculative
loads (SSBS) is implemented, before disabling speculative
loads.

Change-Id: I7607c45ed2889260d22a94f6fd9af804520acf67
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>

This patch removes .arch "arm8.1-a" and "armv8-a"
directives which overwrite ASFLAGS_aarch64 option based
on ARM_ARCH_MINOR passed to Makefile and cause
translation errors like
"selected processor does not support `bti jc'"
for armv8.5-a targets when BTI support is enabled.

Change-Id: Idca5b66ed1e5d86e2188b0c0f16c3819990957c4
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

The workaround for Cortex-A76 errata #1286807 is implemented
in this patch.

Change-Id: I6c15af962ac99ce223e009f6d299cefb41043bed
Signed-off-by: Soby Mathew <soby.mathew@arm.com>