Skip to content

GitLab

Switch branch/tag
  1. 24 Jun, 2020 5 commits
  3. 23 Jun, 2020 1 commit
    • J-Alves's avatar
      FFA Version interface update · 4388f28f
      J-Alves authored 
      

Change handler of FFA version interface:
- Return SPMD's version if the origin of the call is secure;
- Return SPMC's version if origin is non-secure.
Signed-off-by: default avatarJ-Alves <joao.alves@arm.com>
Change-Id: I0d1554da79b72b1e02da6cc363a2288119c32f44
      4388f28f
  5. 22 Jun, 2020 4 commits
  7. 17 Jun, 2020 4 commits
  9. 12 Jun, 2020 2 commits
  11. 11 Jun, 2020 1 commit
  13. 09 Jun, 2020 3 commits
    • Madhukar Pappireddy's avatar
      plat/fvp: Add support for dynamic description of secure interrupts · 452d5e5e
      Madhukar Pappireddy authored 
      

Using the fconf framework, the Group 0 and Group 1 secure interrupt
descriptors are moved to device tree and retrieved in runtime. This
feature is enabled by the build flag SEC_INT_DESC_IN_FCONF.

Change-Id: I360c63a83286c7ecc2426cd1ff1b4746d61e633c
Signed-off-by: default avatarMadhukar Pappireddy <madhukar.pappireddy@arm.com>
      452d5e5e
    • Andre Przywara's avatar
      GICv3: GIC-600: Detect GIC-600 at runtime · b4ad365a
      Andre Przywara authored 
      

The only difference between GIC-500 and GIC-600 relevant to TF-A is the
differing power management sequence.
A certain GIC implementation is detectable at runtime, for instance by
checking the IIDR register. Let's add that test before initiating the
GIC-600 specific sequence, so the code can be used on both GIC-600 and
GIC-500 chips alike, without deciding on a GIC chip at compile time.

This means that the GIC-500 "driver" is now redundant. To allow minimal
platform support, add a switch to disable GIC-600 support.

Change-Id: I17ea97d9fb05874772ebaa13e6678b4ba3415557
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
      b4ad365a
    • Manish Pandey's avatar
      dualroot: add chain of trust for secure partitions · 44f1aa8e
      Manish Pandey authored 
      

A new certificate "sip-sp-cert" has been added for Silicon Provider(SiP)
owned Secure Partitions(SP). A similar support for Platform owned SP can
be added in future. The certificate is also protected against anti-
rollback using the trusted Non-Volatile counter.

To avoid deviating from TBBR spec, support for SP CoT is only provided
in dualroot.
Secure Partition content certificate is assigned image ID 31 and SP
images follows after it.

The CoT for secure partition look like below.
+------------------+       +-------------------+
| ROTPK/ROTPK Hash |------>| Trusted Key       |
+------------------+       | Certificate       |
                           | (Auth Image)      |
                          /+-------------------+
                         /                   |
                        /                    |
                       /                     |
                      /                      |
                     L                       v
+------------------+       +-------------------+
| Trusted World    |------>| SiP owned SPs     |
| Public Key       |       | Content Cert      |
+------------------+       | (Auth Image)      |
                        /   +-------------------+
                       /                      |
                      /                      v|
+------------------+ L     +-------------------+
| SP_PKG1 Hash     |------>| SP_PKG1           |
|                  |       | (Data Image)      |
+------------------+       +-------------------+
        .                           .
        .                           .
        .                           .
+------------------+       +-------------------+
| SP_PKG8 Hash     |------>| SP_PKG8           |
|                  |       | (Data Image)      |
+------------------+       +-------------------+
Signed-off-by: default avatarManish Pandey <manish.pandey2@arm.com>
Change-Id: Ia31546bac1327a3e0b5d37e8b99c808442d5e53f
      44f1aa8e
  15. 08 Jun, 2020 1 commit
    • Manish Pandey's avatar
      cert_create: add SiP owned secure partitions support · 0792dd7d
      Manish Pandey authored 
      

Add support to generate certificate "sip-sp-cert" for Secure
Partitions(SP) owned by Silicon provider(SiP).
To avoid deviation from TBBR specification the support is only added for
dualroot CoT and not for TBBR CoT.

A single certificate file is generated containing hash of individual
packages. Maximum 8 secure partitions are supported.

Following new options added to cert_tool:
 --sip-sp-cert --> SiP owned Secure Partition Content Certificate
 --sp-pkg1 --> Secure Partition Package1 file
 --sp-pkg2
 .....
 --sp-pkg8

Trusted world key pair is used for signing.

Going forward, this feature can be extended for Platfrom owned
Partitions, if required.
Signed-off-by: default avatarManish Pandey <manish.pandey2@arm.com>
Change-Id: Ia6dfbc1447cfb41b1fcbd12cf2bf7b88f409bd8d
      0792dd7d
  17. 06 Jun, 2020 5 commits
  19. 03 Jun, 2020 1 commit
  21. 02 Jun, 2020 3 commits
    • Jimmy Brisson's avatar
      Enable ARMv8.6-ECV Self-Synch when booting to EL2 · 29d0ee54
      Jimmy Brisson authored 
      

Enhanced Counter Virtualization, ECV, is an architecture extension introduced
in ARMv8.6. This extension allows the hypervisor, at EL2, to setup
self-synchronizing views of the timers for it's EL1 Guests. This patch pokes the
control register to enable this extension when booting a hypervisor at EL2.

Change-Id: I4e929ecdf400cea17eff1de5cf8704aa7e40973d
Signed-off-by: default avatarJimmy Brisson <jimmy.brisson@arm.com>
      29d0ee54
    • Jimmy Brisson's avatar
      Enable ARMv8.6-FGT when booting to EL2 · 110ee433
      Jimmy Brisson authored 
      

The Fine Grained Traps (FGT) architecture extension was added to aarch64 in
ARMv8.6. This extension primarily allows hypervisors, at EL2, to trap specific
instructions in a more fine grained manner, with an enable bit for each
instruction. This patch adds support for this extension by enabling the
extension when booting an hypervisor at EL2.

Change-Id: Idb9013ed118b6a1b7b76287237096de992ca4da3
Signed-off-by: default avatarJimmy Brisson <jimmy.brisson@arm.com>
      110ee433
    • Masahisa Kojima's avatar
      xlat_tables_v2: add base table section name parameter for spm_mm · 0922e481
      Masahisa Kojima authored 
      Core spm_mm code expects the translation tables are located in the
inner & outer WBWA & shareable memory.
REGISTER_XLAT_CONTEXT2 macro is used to specify the translation
table section in spm_mm.

In the commit 363830df

 (xlat_tables_v2: merge
REGISTER_XLAT_CONTEXT_{FULL_SPEC,RO_BASE_TABLE}), REGISTER_XLAT_CONTEXT2
macro explicitly specifies the base xlat table goes into .bss by default.
This change affects the existing SynQuacer spm_mm implementation.
plat/socionext/synquacer/include/plat.ld.S linker script intends to
locate ".bss.sp_base_xlat_table" into "sp_xlat_table" section,
but this implementation is no longer available.

This patch adds the base table section name parameter for
REGISTER_XLAT_CONTEXT2 so that platform can specify the
inner & outer WBWA & shareable memory for spm_mm base xlat table.
If PLAT_SP_IMAGE_BASE_XLAT_SECTION_NAME is not defined, base xlat table
goes into .bss by default, the result is same as before.

Change-Id: Ie0e1a235e5bd4288dc376f582d6c44c5df6d31b2
Signed-off-by: default avatarMasahisa Kojima <masahisa.kojima@linaro.org>
      0922e481
  23. 01 Jun, 2020 3 commits
  25. 31 May, 2020 1 commit
    • Alexei Fedorov's avatar
      TF-A: Fix BL31 linker script error · 34dd1e96
      Alexei Fedorov authored 
      

The patch fixes BL31 linker script error
"Init code ends past the end of the stacks"
for platforms with number of CPUs less than 4,
which is caused by __STACKS_END__ address being
lower than __INIT_CODE_END__.
The modified BL31 linker script detects such cases
and increases the total amount of stack memory,
setting __STACKS_END__ = __INIT_CODE_END__, and
CPUs' stacks are calculated by BL31 'plat_get_my_stack'
function accordingly. For platforms with more than 4 CPUs
and __INIT_CODE_END__ < __STACKS_END__ stack memory does not
increase and allocated CPUs' stacks match the existing
implementation.
The patch removes exclusion of PSCI initialization
functions from the reclaimed .init section in
'arm_reclaim_init.ld.S' script, which increases the
size of reclaimed memory region.

Change-Id: I927773e00dd84e1ffe72f9ee534f4f2fc7b6153c
Signed-off-by: default avatarAlexei Fedorov <Alexei.Fedorov@arm.com>
      34dd1e96
  27. 26 May, 2020 1 commit
  29. 25 May, 2020 1 commit
    • J-Alves's avatar
      SPCI is now called PSA FF-A · 662af36d
      J-Alves authored 
      

SPCI is renamed as PSA FF-A which stands for Platform Security
Architecture Firmware Framework for A class processors.
This patch replaces the occurrence of SPCI with PSA FF-A(in documents)
or simply FFA(in code).

Change-Id: I4ab10adb9ffeef1ff784641dfafd99f515133760
Signed-off-by: default avatarJ-Alves <joao.alves@arm.com>
      662af36d
  31. 21 May, 2020 1 commit
  33. 19 May, 2020 3 commits
    • johpow01's avatar
      Enable v8.6 WFE trap delays · 6cac724d
      johpow01 authored 
      

This patch enables the v8.6 extension to add a delay before WFE traps
are taken. A weak hook plat_arm_set_twedel_scr_el3 has been added in
plat/common/aarch64/plat_common.c that disables this feature by default
but platform-specific code can override it when needed.

The only hook provided sets the TWED fields in SCR_EL3, there are similar
fields in HCR_EL2, SCTLR_EL2, and SCTLR_EL1 to control WFE trap delays in
lower ELs but these should be configured by code running at EL2 and/or EL1
depending on the platform configuration and is outside the scope of TF-A.
Signed-off-by: default avatarJohn Powell <john.powell@arm.com>
Change-Id: I0a9bb814205efeab693a3d0a0623e62144abba2d
      6cac724d
    • Max Shvetsov's avatar
      Fix exception in save/restore of EL2 registers. · 30ee3755
      Max Shvetsov authored 
      

Removing FPEXC32_EL2 from the register save/restore routine for EL2
registers since it is already a part of save/restore routine for
fpregs.
Signed-off-by: default avatarMax Shvetsov <maksims.svecovs@arm.com>
Change-Id: I5ed45fdbf7c8efa8dcfcd96586328d4f6b256bc4
      30ee3755
    • Manish V Badarkhe's avatar
      Cleanup the code for TBBR CoT descriptors · ad43c49e
      Manish V Badarkhe authored 
      

CoT used for BL1 and BL2 are moved to tbbr_cot_bl1.c
and tbbr_cot_bl2.c respectively.
Common CoT used across BL1 and BL2 are moved to
tbbr_cot_common.c.
Signed-off-by: default avatarManish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I2252ac8a6960b3431bcaafdb3ea4fb2d01b79cf5
      ad43c49e