- 13 Aug, 2019 1 commit
-
-
Hadi Asyrafi authored
Extract clock information for UART, MMC & Watchdog from the platform rather than hard code it Signed-off-by:Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com> Change-Id: I2582bd34a6da97bd75d5ccba5f93840e65f26b03
-
- 07 Aug, 2019 1 commit
-
-
Hadi Asyrafi authored
Pull out common code from aarch64 and include Signed-off-by:
-
- 02 Aug, 2019 1 commit
-
-
Hadi Asyrafi authored
Previous config blocks ATF runtime service communications with SDM mailbox Signed-off-by:
-
- 01 Aug, 2019 1 commit
-
-
Hadi Asyrafi authored
Pull out common code from agilex and stratix10 Signed-off-by:
-
- 30 Jul, 2019 1 commit
-
-
Hadi Asyrafi authored
Previous config blocks ATF runtime service communications with SDM mailbox Signed-off-by:
-
- 24 Jul, 2019 1 commit
-
-
Ambroise Vincent authored
"result of '1 << 31' requires 33 bits to represent, but 'int' only has 32 bits [-Werror=shift-overflow=]" This is treated as an error since commit 93c690eb ("Enable -Wshift-overflow=2 to check for undefined shift behavior") Change-Id: I141827a6711ab7759bfd6357e4ed9c1176da7c7b Signed-off-by:
Ambroise Vincent <ambroise.vincent@arm.com>
-
- 17 Jul, 2019 1 commit
-
-
Hadi Asyrafi authored
Signed-off-by:
-
- 11 Jul, 2019 1 commit
-
-
Justin Chadwell authored
This consists of ensuring that the left operand of each shift is unsigned when the operation might overflow into the sign bit. Change-Id: I4c7a315cb18b3bbe623e7a7a998d2dac869638a7 Signed-off-by:Justin Chadwell <justin.chadwell@arm.com>
-
- 10 Jul, 2019 1 commit
-
-
Tien Hock, Loh authored
MMC sample select needs to be set properly so that DWMMC clock can be driven to 50Mhz Signed-off-by:Tien Hock, Loh <tien.hock.loh@intel.com> Change-Id: I4a1dde4f6a1e78a36940c57a7a5b162be0bd443a
-
- 28 Jun, 2019 1 commit
-
-
Ambroise Vincent authored
The new API becomes the default one. Change-Id: Ic1d602da3dff4f4ebbcc158b885295c902a24fec Signed-off-by:
-
- 26 Jun, 2019 4 commits
-
-
Hadi Asyrafi authored
Signed-off-by: -
Hadi Asyrafi authored
Signed-off-by: -
Hadi Asyrafi authored
Signed-off-by: -
Hadi Asyrafi authored
Signed-off-by:
-
- 21 Mar, 2019 1 commit
-
-
Muhammad Hadi Asyrafi Abdul Halim authored
Watchdog driver support & enablement during platform setup Signed-off-by:
-
- 13 Mar, 2019 2 commits
-
-
Muhammad Hadi Asyrafi Abdul Halim authored
Manages QSPI initialization, configuration and IO handling as boot device Signed-off-by: -
Muhammad Hadi Asyrafi Abdul Halim authored
To support the enablement of QSPI booting Signed-off-by:
-
- 08 Mar, 2019 2 commits
-
-
Tien Hock, Loh authored
MMC stack needs OCR voltage information for the platform to initialize MMC controller correctly. Signed-off-by: -
Tien Hock, Loh authored
MMC stack needs OCR voltage information for the platform to initialize MMC controller correctly. Signed-off-by:
-
- 07 Mar, 2019 2 commits
-
-
Muhammad Hadi Asyrafi Abdul Halim authored
Change map region for device 2 from non-secure to secure Signed-off-by: -
Tien Hock, Loh authored
We should be using zeromem to scrub memory instead of memset. This would improve the performance by 200x Signed-off-by:
-
- 26 Feb, 2019 1 commit
-
-
Tien Hock, Loh authored
This adds BL31 support to Intel Stratix10 SoCFPGA platform. BL31 in TF-A supports: - PSCI calls to enable 4 CPU cores - PSCI mailbox calls for FPGA reconfiguration Signed-off-by:
-
- 13 Feb, 2019 1 commit
-
-
Loh Tien Hock authored
A DDR calibration value is missing write mask, causing ECC DDR calibration to fail. This patch addresses the issue. ECC should also be scrubbed before MMU initializes, thus the scrubbing is moved to ddr intialization phase. Signed-off-by:
-
- 04 Feb, 2019 1 commit
-
-
Loh Tien Hock authored
This adds BL2 support for Intel Stratix 10 SoC FPGA. Functionality includes: - Release and setup peripherals from reset - Calibrate DDR - ECC DDR Scrubbing - Load FIP (bl31 and bl33) Signed-off-by:
-
