linux-firmware: update firmware file for atusb

Update to newly released 0.3 version while also adding another
file for the slightly different Atmel Raven USB dongle to be
supported by the same kernel driver.
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

WHENCE

@@ -3130,6 +3130,10 @@ Driver: atusb - ATUSB IEEE 802.15.4 transceiver driver
 
 File: atusb/atusb-0.2.dfu
 Version: 0.2
+File: atusb/atusb-0.3.dfu
+Version: 0.3
+File: atusb/rzusb-0.3.bin
+Version: 0.3
 Info: atusb/ChangeLog
 
 Licence: GPLv2 or later. See GPL-2 and GPL-3 for details.

atusb/ChangeLog

 ChangeLog:
 	* 0.0  initial release
 	* 0.1  addition of ATUSB_TEST
-	* 0.2  First public release. Compatible with atusb driver in the
-	  upcoming 4.2 kernel
+	* 0.2  First public release. Compatible with atusb driver in the upcoming 4.2 kernel
+	* 0.3	* ATUSB_EUI64_READ/WRITE for permanent EUI64 handling
+		* Support to run the firmware on Atmel Raven USB dongles (Alexander Aring)
+		* Remove FCS frame check from firmware and leave it to the driver
+		* Use extended operation mode for TX for automatic ACK handling
 
 To flash the firmware you need dfu-util on the host:
-dfu-util -d 20b7:1540 -D atusb-0.2.dfu
+dfu-util -d 20b7:1540 -D atusb-0.3.dfu
+
+For the Atmel Raven USB dongle a full JTAG setup is needed to flash the
+firmware as no DFU bootloader is available there.
 
 The firmware is flashed into permanent storage and does not need to be provided
 after power off. A new firmware version can be flashed the same way.