GitLab

AR5523 is a USB Wifi chipset that was popular circa 2005.
Better late then never.
Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Peng Chen <pengchen@qca.qualcomm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

File: rtl_nic/rtl8168g-1.fw
Version: 0.0.3
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Divy Le Ray <divy@chelsio.com>

This new firmware fixes several minor bugs:
 1. In switch dependent mode, DCB priority was used to override inner vlan
    priority.
 2. In switch dependent  mode, inner vlan was added in case of DCB priority
    even if outer vlan was present.
 3. In switch dependent mode, outer vlan was overridden by DCB priority when
    working in STATIC COS mode while inner vlan was present.
 4. iSCSI - under heavy iSCSI traffic, when TCP out-of-order condition
    occurred, it was possible for the connection to close and recover.
 5. iSCSI - connections on-chip TCP establishment might have failed.
 6. iSCSI - out-of-order isles might have caused on-chip TCP connections
    to fail in their graceful termination.
 7. iSCSI - there was a theoretical race in which an RST packet sent from
    pure-ack queue in specific timing could cause a credit-return overflow.
 8. iSCSI - not all packets were completed on a forward channel.
 9. DCB - fixed for 4-port devices; Until now, wrong credit counters were
    used, causing dcb to fail.
10. Fixed false parity reported in CAM memories when operating near -5% on
    the 1.0V core supply.
11. ETS default settings are set to fairness between traffic classes (rather
    than strict priority), and uses the same chip receive buffer configuration
    for both PFC and pause.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Goldstein <eilong@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Although the newest firmware for the RTL8192SU, which is found in vendor
driver rtl8188C_8192C_8192D_usb_linux_v3.4.2_3727.20120404, works with most
devices, it causes drops of the wireless connection for the ASUS WL-167G V3
(USB ID 0b05:1791), the D-Link DWA131 (07d1:3303), and probably others.
Tests show that the firmware from vendor driver
rtl8712_8188_8191_8192SU_usb_linux_v7_0.20100831 works better.

This commerts reverts to that older firmware.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Peng Chen <pengchen@qca.qualcomm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>

The driver and firmware are new additions to the rtlwifi family of drivers.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Ray Chen <raychen@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

New version. Submitted with permission from Marvell.
Signed-off-by: Daniel Drake <dsd@laptop.org>

The existing version in the tree was v9.70.3.p36.

The WHENCE file is still correct; this came from Marvell extranet,
and is available under the same license.
Signed-off-by: Daniel Drake <dsd@laptop.org>

version 18.168.6.1

This adds support for WoWLAN and P2P, both of
which are still experimental in the driver.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[bwh: Do not remove the previous version]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Peng Chen <pengchen@qca.qualcomm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This is the initial version of bcm4334 SDIO interface firmware
for brcmfmac.
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

A new firmware file is used in the vendor driver with name/version
rtl8188C_8192C_8192D_usb_linux_v3.4.2_3727.20120404.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

File: rtl_nic/rtl8168g-1.fw
Version: 0.0.2

Change the ocp_base of linux driver to OCP_STD_PHY_BASE after setting
firmware. The firmware would modify the ocp_base, and that results the
driver uses the wrong ocp_base to access standard phy after setting
firmware.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Peng Chen <pengchen@qca.qualcomm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

File: rtl_nic/rtl8168g-1.fw
Version: 0.0.1
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

File: rtl_nic/rtl8106e-1.fw
Version: 0.0.1
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

File: rtl_nic/rtl8411-1.fw
Version: 0.0.3
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

File: rtl_nic/rtl8168f-1.fw
Version: 0.0.5
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

 add patch and sysconfig for Qualcomm Atheros AR9462
Signed-off-by: Costa Yao <cqyao@qca.qualcomm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

rtlwifi: rtl8192ce: rtl8192se: rtl8192de: Update to rtl_92ce_92se_92de_linux_mac80211_0004.0816.2011 driver

Realtek driver rtl_92ce_92se_92de_linux_mac80211_0004.0816.2011 introduced new
versions of the firmware for rtl8192se, and rtl8192de. It also adds new
firmware for new cuts of the RTL8192CE chips.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This new firmware is used with the new wl18xx driver that has been
recently added in the Linux kernel.  It will be part of Linux v3.6.

This new firmware's version is 8.2.0.0.100.
Signed-off-by: Luciano Coelho <coelho@ti.com>

There are some changes in the newer firmware versions that are not
backwards compatible with older versions of the driver.  Starting on
Linux 3.6, we will need these new versions.

The new versions are X.3.10.2.115 for single-role and X.5.7.0.27 for
multi-role.
Signed-off-by: Luciano Coelho <coelho@ti.com>

Update firmwrae that support the rt3290 chip.
Signed-off-by: Woody Hung <Woody.Hung@mediatek.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Divy Le Ray <divy@chelsio.com>

One more step on the road to entirely eliminating the concept of
packages.  I adapted the installation rules from the Fedora
spec file.

They should clearly be less lame, but to do so we'd need more formal
rules about which files should be installed.  Maybe just limit it to
things ending in ".bin" or ".fw"?

See http://people.gnome.org/~walters/docs/build-api.txt

Signed-off-by: Colin Walters <walters@verbum.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

add patch and sysconfig for Qualcomm Atheros QCA9564
Signed-off-by: Costa Yao <cqyao@qca.qualcomm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

basic info about how to submit files or patches.
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This add firmware for the HD7xxx asics code-
named Southern Islands and the trinity APU code-
named Aruba.

It also updates the dates on the license info.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>