GitLab

Signed-off-by: Divy Le Ray <divy@chelsio.com>

Update t4fw.bin symlink to point the the latest firmware.
Signed-off-by: Divy Le Ray <divy@chelsio.com>

Suffix the FW file name with its version number.
The cxgb4 driver looks up t4fw.bin, so add this file as a symlink.
Signed-off-by: Divy Le Ray <divy@chelsio.com>

The brcmfmac driver located in drivers/net/wireless/brcm80211 has
been extended with support for USB devices. This patch adds firmware
for the bcm43236 device.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

The nvram file contains configuration info for firmware which varies
with different hardware designs. The version currently in the
repository is for a Broadcom-internal development board that is not
available on the market. This file is not applicable for any exsisting
end-user product. Users should use the nvram file that was
shipped with their device to avoid unexpected or incorrect behavior.
Remove the file from repository to avoid confusion.
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This is the initial version of bcm4330 firmware of brcmfmac
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This patch adds new version of bcm4329 firmware image for brcmfmac
from 3.3 or later kernel.
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Just an extension of the copyright dates.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-6000g2b-ucode-18.168.6.1.tgz

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>

http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-2030-ucode-18.168.6.1.tgz

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>

http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-2000-ucode-18.168.6.1.tgz

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>

http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-135-ucode-18.168.6.1.tgz

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>

http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-105-ucode-18.168.6.1.tgz

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>

v1.1 allows finer grained tuning of the SSC (spread-spectrum-clocking)
settings for SAS and SATA.  See notes in probe_roms.h

v1.3 allows the attenuation of the attached cables to be specified to
the driver in terms of 'short', 'medium', and 'long' (see probe_roms.h).
These settings (per phy) are retrieved from the platform oem-parameters
(BIOS rom), the fallback firmware blob, or via a module parameter
override.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Most of the CIS files come from the pcmcia-cs project and are built
from a text format using the pack_cis tool.

In pcmcia-cs 3.2.8, apparently the last release, pack_cis had some
bugs that are fatal when it is built with a current gcc and glibc.
Therefore I refer to my own repackaged version that runs successfully
and generates exactly the same binaries included here.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

isci requires a parameter blob which is usually found in NVRAM, but it
can fall back to loading with request_firmware().  These files are
taken from the Linux source tree where they were wrongly added in
Linux 3.0.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

New firmware fixes iSCSI problems with some LeftHand targets that don't
set TTT=0xffffffff for Data-In according to spec.  Firmware generates
exception warnings for this condition and becomes very slow.  This is
fixed by suppressing these warnings when using default error mask.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

To fix bugs when running offloaded FCoE/iSCSI traffic in multiple
Class of Service environments.  In some scenarios, traffic could stop
on certain rings and eventually all traffic would stop.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Export the blobs to linux-firmware; keep the previous versions]

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Includes FCoE releated fixes in FW flows
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Export the blobs to linux-firmware]

57712 HW supported with same set of features as for 57710/57711
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Export the blob to linux-firmware]

This is the new FW HSI blob and the relevant definitions without logic changes.
It also included code adaptation for new HSI. New features are not enabled.

New FW/HSI includes:
- Support for 57712 HW
- Future support for VF (not used)
- Improvements in FW interrupts scheme
- FW FCoE hooks (stubs for future usage)
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Export the blobs to linux-firmware]

The commands given in the source aren't quite right, and don't cover
use of ihex2fw.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

keyspan_pda.S has an out-of-range decimal constant that looks
like it was really meant to be a binary constant.  Comparing
with the binary, it appears that as31 used to treat this as 0,
so change the source to use 0 and add a comment on this.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Downstream commercial distributors need to distribute the source code
as well as the binary.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Some small amount of postprocessing is required after assembling
bootstrap.asm with a56.  Add a script and makefile for this.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Add new firmware:
1. rtl_nic/rtl8402-1.fw
   version: 0.0.1
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Add new firmware:
1. rtl_nic/rtl8411-1.fw
   version: 0.0.1
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Add new firmware:
1. rtl_nic/rtl8168f-1.fw
   version: 0.0.3
2. rtl_nic/rtl8168f-2.fw
   version: 0.0.3
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Updated firmware with stability fixes.
Version: 0.0.3
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Includes fixes for the following issues:
  1. (iSCSI) Arrival of un-solicited ASYNC message causes
     firmware to abort the connection with RST.
  2. (FCoE) There is a probability that truncated FCoE packet on
     RX path won't get detected which might lead to FW assert.
  3. (iSCSI) Arrival of target-initiated NOP-IN during intense
     ISCSI traffic might lead to FW assert.
  4. (iSCSI) Chip hangs when in case of retransmission not aligned
     to 4-bytes from the beginning of iSCSI PDU.
  5. (FCoE) Arrival of packets beyond task IO size can lead to crash.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

This patch adds the inital version of newly formatted firmware
for ath6kl driver.
Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Update firmware for QLogic Intelligent Ethernet (3000 and 3100 Series)
Adapters to revision 4.0.579.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

The driver requests "lbtf_usb.bin".
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Add new firmware:
1. rtl_nic/rtl8168f-1.fw
   version: 0.0.2
2. rtl_nic/rtl8168f-2.fw
   version: 0.0.2
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Updated firmware with stability fixes.
Version: 0.0.2
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Update cxgb4 firmware to revision 1.3.10.0
Signed-off-by: Divy Le Ray <divy@chelsio.com>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>