- 11 Feb, 2012 2 commits
-
-
Franky Lin authored
This is the initial version of bcm4330 firmware of brcmfmac Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Franky Lin authored
This patch adds new version of bcm4329 firmware image for brcmfmac from 3.3 or later kernel. Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
- 25 Jan, 2012 1 commit
-
-
Ben Hutchings authored
Just an extension of the copyright dates. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
- 23 Jan, 2012 5 commits
-
- 05 Jan, 2012 1 commit
-
-
Dan Williams authored
v1.1 allows finer grained tuning of the SSC (spread-spectrum-clocking) settings for SAS and SATA. See notes in probe_roms.h v1.3 allows the attenuation of the attached cables to be specified to the driver in terms of 'short', 'medium', and 'long' (see probe_roms.h). These settings (per phy) are retrieved from the platform oem-parameters (BIOS rom), the fallback firmware blob, or via a module parameter override. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
- 04 Jan, 2012 1 commit
-
-
Ben Hutchings authored
Most of the CIS files come from the pcmcia-cs project and are built from a text format using the pack_cis tool. In pcmcia-cs 3.2.8, apparently the last release, pack_cis had some bugs that are fatal when it is built with a current gcc and glibc. Therefore I refer to my own repackaged version that runs successfully and generates exactly the same binaries included here. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
- 29 Dec, 2011 1 commit
-
-
Ben Hutchings authored
isci requires a parameter blob which is usually found in NVRAM, but it can fall back to loading with request_firmware(). These files are taken from the Linux source tree where they were wrongly added in Linux 3.0. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
- 26 Dec, 2011 1 commit
-
-
Michael Chan authored
New firmware fixes iSCSI problems with some LeftHand targets that don't set TTT=0xffffffff for Data-In according to spec. Firmware generates exception warnings for this condition and becomes very slow. This is fixed by suppressing these warnings when using default error mask. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
- 17 Dec, 2011 5 commits
-
-
Dmitry Kravkov authored
To fix bugs when running offloaded FCoE/iSCSI traffic in multiple Class of Service environments. In some scenarios, traffic could stop on certain rings and eventually all traffic would stop. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Export the blobs to linux-firmware; keep the previous versions]
-
Ben Hutchings authored
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Vladislav Zolotarov authored
Includes FCoE releated fixes in FW flows Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Export the blobs to linux-firmware]
-
Dmitry Kravkov authored
57712 HW supported with same set of features as for 57710/57711 Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Export the blob to linux-firmware]
-
Dmitry Kravkov authored
This is the new FW HSI blob and the relevant definitions without logic changes. It also included code adaptation for new HSI. New features are not enabled. New FW/HSI includes: - Support for 57712 HW - Future support for VF (not used) - Improvements in FW interrupts scheme - FW FCoE hooks (stubs for future usage) Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Export the blobs to linux-firmware]
-
- 16 Dec, 2011 9 commits
-
-
Ben Hutchings authored
The commands given in the source aren't quite right, and don't cover use of ihex2fw. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Ben Hutchings authored
keyspan_pda.S has an out-of-range decimal constant that looks like it was really meant to be a binary constant. Comparing with the binary, it appears that as31 used to treat this as 0, so change the source to use 0 and add a comment on this. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Ben Hutchings authored
Downstream commercial distributors need to distribute the source code as well as the binary. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Ben Hutchings authored
Some small amount of postprocessing is required after assembling bootstrap.asm with a56. Add a script and makefile for this. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
Hayes Wang authored
Add new firmware: 1. rtl_nic/rtl8402-1.fw version: 0.0.1 Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-
Hayes Wang authored
Add new firmware: 1. rtl_nic/rtl8411-1.fw version: 0.0.1 Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-
Hayes Wang authored
Add new firmware: 1. rtl_nic/rtl8168f-1.fw version: 0.0.3 2. rtl_nic/rtl8168f-2.fw version: 0.0.3 Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-
Hayes Wang authored
Updated firmware with stability fixes. Version: 0.0.3 Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-
- 24 Oct, 2011 1 commit
-
-
Dmitry Kravkov authored
Includes fixes for the following issues: 1. (iSCSI) Arrival of un-solicited ASYNC message causes firmware to abort the connection with RST. 2. (FCoE) There is a probability that truncated FCoE packet on RX path won't get detected which might lead to FW assert. 3. (iSCSI) Arrival of target-initiated NOP-IN during intense ISCSI traffic might lead to FW assert. 4. (iSCSI) Chip hangs when in case of retransmission not aligned to 4-bytes from the beginning of iSCSI PDU. 5. (FCoE) Arrival of packets beyond task IO size can lead to crash. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
- 01 Oct, 2011 1 commit
-
-
Senthil Balasubramanian authored
This patch adds the inital version of newly formatted firmware for ath6kl driver. Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
- 16 Sep, 2011 1 commit
-
-
Sucheta Chakraborty authored
Update firmware for QLogic Intelligent Ethernet (3000 and 3100 Series) Adapters to revision 4.0.579. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
- 09 Sep, 2011 1 commit
-
-
Ben Hutchings authored
The driver requests "lbtf_usb.bin". Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
- 02 Sep, 2011 2 commits
-
-
Hayes Wang authored
Add new firmware: 1. rtl_nic/rtl8168f-1.fw version: 0.0.2 2. rtl_nic/rtl8168f-2.fw version: 0.0.2 Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-
Hayes Wang authored
Updated firmware with stability fixes. Version: 0.0.2 Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-
- 29 Aug, 2011 1 commit
-
-
Divy Le Ray authored
Update cxgb4 firmware to revision 1.3.10.0 Signed-off-by: Divy Le Ray <divy@chelsio.com>
-
- 17 Aug, 2011 2 commits
-
-
Larry Finger authored
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
-
- 14 Aug, 2011 1 commit
-
-
Shahar Levi authored
The new wl12xx fw (ver 7.3.0.0.77) had some major api changes. The main change was the addition of multi-role concept. For each chip there are two FW kind: 1) A single FW for both STA and AP roles 2) PLT FW that support calibration process Update FW for WL128x chip to 7.3.0.0.77: STA & AP FW version PLT FW version Update FW for WL127x chip 6.3.0.0.77: STA & AP FW version PLT FW version Create a soft symbolic link wl12xx-nvs.bin that link to one of the examples NVF files (by default wl127x) Signed-off-by: Shahar Levi <shahar_levi@ti.com>
-
- 11 Aug, 2011 1 commit
-
-
Shahar Levi authored
Update FW for WL128x chip: STA FW version 7.1.5.50.74 AP FW version 7.2.1.0.54 Update FW for WL127x chip: STA FW version 6.1.5.50.74 AP FW version 6.2.1.0.54 Signed-off-by: Shahar Levi <shahar_levi@ti.com>
-
- 04 Aug, 2011 1 commit
-
-
Andres Salomon authored
These blobs are released by the OLPC project, and drive Marvell libertas chips. OLPC hardware has additional features and quirks, which makes special firmware necessary. The 'lbtf' blobs are thin firmware, which allows the Linux drivers more control over the device's functionality. The firmware was downloaded from http://dev.laptop.org/pub/firmware/libertas/ . Signed-off-by: Andres Salomon <dilinger@queued.net>
-
- 30 Jul, 2011 2 commits
-
-
-
Dan Williams authored
Signed-off-by: Dan Williams <dcbw@redhat.com>
-