GitLab

Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Merge branch 'ath10k-20190201' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware

Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch adds new FW for bnx2x, which adds the following:
 - TX VLAN filtering support.
 - Enable TPA only for packets without VLAN.

It also addresses few critical issues,
 - Fairness algorithm misbehaviour when minimum bandwidth configured
   for all PFs.
 - Error recovery issue on TAPE devices.
 - FW not discarding FIP frames that are not designated to PF.
 - Kernel driver initialization failure after preboot driver.
 - VxLAN stops working after sending inner IP fragmented traffic.
 - Issues in the following FW flows:
    SD VLAN update, TX packet drop, packet padding flow, vlan add/remove.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

From internal git commit:
534e4d6a23b55c75a4b60ebdb323118ee1f4e08d
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

WLAN (PCIe) firmware version: W16.68.1.p195
Bluetooth (USB) firmware version: 16.26.1.p195

In PCIe-USB chipset, WLAN is over PCIe whereas bluetooth is over
USB. The combo image will be downloaded through WLAN only.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>

WLAN (SDIO) firmware version: W15.68.19.17
Bluetooth (SDIO) firmware version: 15.26.19.17
The combo image can be downloaded through either WLAN or
Bluetooth.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>

WLAN (SDIO) firmware version: W16.68.1.p195
Bluetooth (SDIO) firmware version: 16.26.1.p195

Both WLAN and bluetooth are on SDIO interface.
The combo image can be downloaded either through WLAN or
Bluetooth.
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Hemantkumar Suthar <shemant@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Merge tag 'add-rpi-fw' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware



- Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
- Fix NVRAM config file name for BCM43430 used by Raspberry Pi 3 Model B
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the BCM43455 Wifi/BT moduele as used on the
Raspberry Pi 3 Model B+.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

BCM43430 NVRAM config file for the RPi3 Model B was set to the value
found by brcmf_dmi_probe(), but should use the DT compatible.
Rename the file to actually make it work with the kernel driver.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

From internal git commit:
031c3840bbdbdc1cc9b2b480bb7d8344f72887ed
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

From internal git commit:
031c3840bbdbdc1cc9b2b480bb7d8344f72887ed
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This reverts commit fca59582.

This patch updates the firmware file for Intel Bluetooth 8265
Also it is known as Intel WindStormPeak (WsP).

FW Build: REL0295

Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch updates the firmware file for Intel Bluetooth 8260
also it is known as Intel Snowfield Peak (SfP)

FW Build: REL0522

Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch updates the firmware file for Intel Bluetooth 9260
Also it is known as Intel ThunderPeak (THP).

FW Build: REL0386

Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch updates the firmware file for Intel Bluetooth 9560
Also it is known as Intel JeffersonPeak (JfP).

FW Build: REL0386

Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Merge tag 'add-rpi-fw' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware



- Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
- Add NVRAM for BCM43430 used by Raspberry Pi 3 Model B
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Merge tag 'iwlwifi-fw-2018-12-30' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware



updates for -43.ucode for 9260 and 9000
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the BCM43430 Wifi/BT module as used on the
Raspberry Pi 3 Module B.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

Add a NVRAM file for the BCM43455 Wifi/BT moduele as used on the
Raspberry Pi 3 Model B+.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

WLAN (USB8801) firmware version: W14.68.36.p138
These devices are WLAN only.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>

Add new versions of the firmwares for 9260 and 9000.

Build number: Core_build_core40-120
Revision numbers: 95eb4e97 (9260, 9000)
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>

This reverts commit ec4b0cd3

.

This causes GPU hangs for some users.  Let's revert for now
while we try and root cause the issue.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the Ampak AP6330 Wifi/BT module as used on the
Prowise PT301 tablet. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Prowise PT301 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the Broadcom 43430 WiFi/BT chip as found on the
Chuwi Vi8 Plus tablet's mainboard. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Chuwi Vi8 Plus tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the Ampak AP6234 Wifi/BT module as used on the
Meegopad T08 HDMI stick. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Meegopad T08 HDMI stick.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the Ampak AP6212 Wifi/BT module as used on the
Jumper EZpad mini 3 tablet. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Jumper EZpad mini 3 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the Ampak AP6212 Wifi/BT module as used on the
ONDA V80 Plus tablet. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the ONDA V80 Plus tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the Ampak AP6356 Wifi/BT module as used in the
GPD win handheld. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the GPD win handheld.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Lemaker, the manufacturer of the Banana Pro board has always shipped
the NVRAM file from the Cubietech Cubietruck wifi for use with the
Ampak AP6181 43362 WiFi/BT module on the Banana Pro.

This commit adds a symlink from brcmfmac43362-sdio.lemaker,bananapro.txt
to brcm/brcmfmac43362-sdio.cubietech,cubietruck.txt to match this, making
the Wifi on the Banana Pro work OOTB.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the Ampak AP6210 Wifi/BT module as found on the
Cubietech Cubietruck board. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Cubietech Cubietruck board.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

We are going to add more brcmfmac NVRAM files and some of these will have
spaces in their names, lets be consistens and use quotes around the
filenames of all brcmfmac NVRAM files.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>