GitLab

Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>

This new FW adds support in AFEX mode (multifunction using vntag
header).
It also fixes following issues:
1. Theoretical bug in GRO acceleration (only if the GRO Segment Length
   is a multiple of the SGE Size). This will allow removing the
   workaround from the driver.
2. When a TPA aggregation is open and a packet is accepted with
   timestamp OOO, the new packet begins a new aggregation instead of
   being indicated separately.
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

bnx2/bnx2-mips-09-5.0.0.j15.fw and cxgb3/t3fw-7.10.0.bin were
added by the respective maintainers, so assume the same licence
as for other versions of the firmware.

mts_mt9234mu.fw and mts_mt9234zba.fw were added by a user,
apparently with permission from the vendor but without any licence
specified, so treat them as unknown for now.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

All filenames must be specified relative to the repository root.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

AR6004 only needs fw-2.bin and currently there's just one board file
(bdata.bin).
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

As there are ABI changes increase the API version to 3 and firmware file
is named fw-3.bin.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Updated firmware with stability fixes.
Version: 0.0.2
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Updated firmware with stability fixes.
1. rtl_nic/rtl8168f-1.fw
   Version: 0.0.4
1. rtl_nic/rtl8168f-2.fw
   Version: 0.0.4
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Updated firmware with stability fixes.
Version: 0.0.4
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

The latest wl12xx driver version now requires a new firmware type with
a different ABI.  This patch adds the corresponding 6 firmware
binaries.  Three for wl127x and three for wl128x.  Each set contains
one firmware for single-role, one firmware for multi-role and one
firmware for production testing and calibration.
Signed-off-by: Luciano Coelho <coelho@ti.com>

Use the new standard of having a Version field below each firmware
filename instead of having a separate list.

Additionally improve the NVS file description.
Signed-off-by: Luciano Coelho <coelho@ti.com>

This adds the missing firmware for usbduxsigma. The
driver is already part of the kernel 3.2. The firware
was submitted with the initial driver submission but
probably got lost when the kernel.org was attacked.
Added usbduxsigma to the list of files in WHENCE
Signed-off-by: Bernd Porr <berndporr@f2s.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This new FW adds the ability to aggregate packets for GRO (and not just LRO) and
also fixes some bugs. Please consider adding it to the FW tree:

1. Added new aggregation mode: GRO. In this mode packets are aggregated such
   that the original packets can be reconstructed by the O/S.
2. 57712 HW bug workaround - initialized all CAM TM registers to 0x32.
3. Adding the FCoE statistics structures to the BNX2X HSI.
4. Wrong configuration of TX HW input buffer size may cause theoretical
   performance effect. Performed configuration fix.
5. FCOE - Arrival of packets beyond task IO size can lead to crash.
   Fix firmware data-in flow.
6. iSCSI - In rare cases of on-chip termination the graceful termination timer
   hangs, and the termination doesn't complete. Firmware fix to MSL timer
   tolerance.
7. iSCSI - Chip hangs when target sends FIN out-of-order or with isles open at
   the initiator side. Firmware implementation corrected to drop FIN received
   out-of-order or with isles still open.
8. iSCSI - Chip hangs when in case of retransmission not aligned to 4-bytes from
   the beginning of iSCSI PDU. Firmware implementation corrected to support
   arbitrary aligned retransmissions.
9. iSCSI - Arrival of target-initiated NOP-IN during intense ISCSI traffic might
   lead to crash. Firmware fix to relevant flow.
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

There doesn't appear to be any driver version that will request the
file "cxgb4/t4fw-1.3.10.0.bin".  The current version requests
"cxgb4/t4fw.bin" which remains as a symlink.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Divy Le Ray <divy@chelsio.com>

Update t4fw.bin symlink to point the the latest firmware.
Signed-off-by: Divy Le Ray <divy@chelsio.com>

Suffix the FW file name with its version number.
The cxgb4 driver looks up t4fw.bin, so add this file as a symlink.
Signed-off-by: Divy Le Ray <divy@chelsio.com>

The brcmfmac driver located in drivers/net/wireless/brcm80211 has
been extended with support for USB devices. This patch adds firmware
for the bcm43236 device.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

The nvram file contains configuration info for firmware which varies
with different hardware designs. The version currently in the
repository is for a Broadcom-internal development board that is not
available on the market. This file is not applicable for any exsisting
end-user product. Users should use the nvram file that was
shipped with their device to avoid unexpected or incorrect behavior.
Remove the file from repository to avoid confusion.
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This is the initial version of bcm4330 firmware of brcmfmac
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This patch adds new version of bcm4329 firmware image for brcmfmac
from 3.3 or later kernel.
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-6000g2b-ucode-18.168.6.1.tgz

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>

http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-2030-ucode-18.168.6.1.tgz

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>

http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-2000-ucode-18.168.6.1.tgz

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>

http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-135-ucode-18.168.6.1.tgz

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>

isci requires a parameter blob which is usually found in NVRAM, but it
can fall back to loading with request_firmware().  These files are
taken from the Linux source tree where they were wrongly added in
Linux 3.0.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

New firmware fixes iSCSI problems with some LeftHand targets that don't
set TTT=0xffffffff for Data-In according to spec.  Firmware generates
exception warnings for this condition and becomes very slow.  This is
fixed by suppressing these warnings when using default error mask.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

To fix bugs when running offloaded FCoE/iSCSI traffic in multiple
Class of Service environments.  In some scenarios, traffic could stop
on certain rings and eventually all traffic would stop.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Export the blobs to linux-firmware; keep the previous versions]

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

The commands given in the source aren't quite right, and don't cover
use of ihex2fw.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Downstream commercial distributors need to distribute the source code
as well as the binary.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Some small amount of postprocessing is required after assembling
bootstrap.asm with a56.  Add a script and makefile for this.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Add new firmware:
1. rtl_nic/rtl8402-1.fw
   version: 0.0.1
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Add new firmware:
1. rtl_nic/rtl8411-1.fw
   version: 0.0.1
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Add new firmware:
1. rtl_nic/rtl8168f-1.fw
   version: 0.0.3
2. rtl_nic/rtl8168f-2.fw
   version: 0.0.3
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Updated firmware with stability fixes.
Version: 0.0.3
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Includes fixes for the following issues:
  1. (iSCSI) Arrival of un-solicited ASYNC message causes
     firmware to abort the connection with RST.
  2. (FCoE) There is a probability that truncated FCoE packet on
     RX path won't get detected which might lead to FW assert.
  3. (iSCSI) Arrival of target-initiated NOP-IN during intense
     ISCSI traffic might lead to FW assert.
  4. (iSCSI) Chip hangs when in case of retransmission not aligned
     to 4-bytes from the beginning of iSCSI PDU.
  5. (FCoE) Arrival of packets beyond task IO size can lead to crash.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>