GitLab

This patch adds firmware for the bcm4366 11ac wlan device which
is supported by the brcmfmac driver since commit 55acca90da52
("brcmfmac: Add support for the BCM4365 and BCM4366 PCIE devices").

Cc: Rafal Milecki <zajec5@gmail.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

This patch updates the firmware patch for Intel Bluetooth 7265 (D1)
Also, this device is known as Intel StP D1

StP D1 FW Patch Version: 13

Release Version: 18.15
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

This is v35 firmware for the rtl8723bu. Support for this device is
currently under development and will be added to the rtl8xxxu driver.
This firmware occurs as data statements in Realtek vendor driver
rtl8723BU_WiFi_linux_v4.3.16_14189.20150519_BTCOEX20150119-5844
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

This patch pushes the next firmware for the QED module.
This fixes numerous bugs, most notably:
  - FLR flow isn't properly working.
  - Chip might become unrespronsive after closing a vport.
  - Chip gets stuck when transmitting packet with length > mtu.

It would also allow us to push future features such as:
  - Vlan filter offload.
  - Encapsulation offload.
  - Single Root IOV support.
  - Timesync.
  - Non-L2 protocols.

>From L2 perspecitve, it's also note-worthy to state that it:
  - Changes fastpath HSI - fastpath will be moved to into using
    Jumbo-over-BD.
  - Improves throughput on single connection traffic.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

The 1.4.0 version of ath9k_htc firmware is the first built from the
free software sources.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Cc: Adrian Chadd <adrian.chadd@gmail.com>
Cc: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

Patch for brcmfmac has been submitted upstream and applied to the
wireless-drivers-next repo with commit fdf345642297 ("brcmfmac: Add
support for PCIE 4350 revision 5 device"). This patch adds the new
firmware file required for it.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

Add new qat FW images for c3xxx and c6xxx device type.
Update qat_895xcc FW images with a new version.
Rename qat_mmp.bin to qat_895xcc_mmp.bin to make it consistent
with the rest.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

Based on the previous commit message.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This updates Skylake audio dsp firmware, this version contains
odd bug fixes and support for mclk configuration thru SW

The version of this firmware release is 8.20.00.827

The md5sum of this firmware binary is 2a2166e169098c8620cb15ea0f850ed9
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com>

Add firmware for the following devices, controlled by mxu11x0 kernel
driver

- UPort 1110
- UPort 1130
- UPort 1130I
- UPort 1150
- UPort 1150I
Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com>

While https was always supported on linuxtv.org, only in
Dec 3 2015 the website is using valid certificates.

As we're planning to drop pure http support on some
future, change the http://linuxtv.org references at firmware/WHENCE
file to point to https://linuxtv.org

 instead.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
[bwh: Adjust filename and context for the linux-firmware repository]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Hua Shao <hua.shao@mediatek.com>
[bwh: Add the version to WHENCE]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

These have only been included in linux-firmware.git.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

This adds new FW for bnx2x, which adds the following:
 - Ability to change outer vlan ID for some multi-function modes.
 - FW ability for Geneve RSS classification according to inner headers.
 - Prevent VFs from sending MAC control frames.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

Revision number: 242414
Build number: WFFW19679_R13
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

This patch updates the firmware patch for Intel Bluetooth 7265 (C0/D0)
also known as Intel StP C0 and StP D0

C0 Patch Version: 55
D0 Patch Version: 32
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

This adds the first FW entry to the newly added
Qlogic Ethernet Driver product series.
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

Signed-off-by: Kyle McMartin <kyle@kernel.org>

Internal commit:
89eb0443c30a5fb06291f922e2f784c01213da2f
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

This adds Skylake audio dsp firmware which will be used in Skylake systems
with adsp enabled.

The version of this firmware release is 8.20.00.669

The md5sum of this firmware binary is 039c718077ea3c3a4253110a0554f422
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

This is to make sure that the notice files get automatically included.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <jkkm@boosh.dhcp.thefacebook.com>

This patch adds firmware for the BCM4350 11ac PCIe device.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kyle McMartin <jkkm@boosh.DHCP.thefacebook.com>

Version 14.68.29.p49
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>

SD8897:
    WLAN (SDIO) firmware version: 15.68.7.p53
    Bluetooth (SDIO) firmware version: 15.68.7.p53
    The combo image can be downloaded through either WLAN or
    Bluetooth.

PCIe/USB-8897:
    WLAN (PCIe) firmware version: 15.68.7.p53
    Bluetooth (USB) firmware version: 15.68.7.p53
    The combo image will be downloaded through WLAN only.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>

This versions has the risk of  "DMC RAM corruption issue"
fixed on 1.23.

So let's remove old version and let only the latest one available
for now.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Version: 1.23
Date   : 10/19/2015
Notes:
Following additions from ver1.22
1. WA for Palette and DMC RAM corruption issue.

DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.22
DC3_DC5_COUNT                  80030
DC5_DC6_COUNT                  8002C
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Signed-off-by: David Lin <dlin@marvell.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Add initial firmware and board files for QCA99X0 hw2.0 family of chipsets.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
[bwh: Remove trailing whitespace from notice]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Add initial firmware and board files for QCA6174 hw3.0 family of chipsets.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
[bwh: Remove trailing whitespace from notice and convert it to UTF-8]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Add initial firmware and board files for QCA6174 hw2.1 family of chipsets.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
[bwh: Remove trailing whitespace from notice and convert it to UTF-8]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Add firmware 10.2.4.70.9-2 which uses FW API 5 so use name firmware-5.bin. Keep
firmware-4.bin for backwards compatibility with older ath10k versions.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
[bwh: Remove trailing whitespace from notice]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

In commit 40d14143

 ("ath10k: add firmware 10.2.4.45 as firmware-4.bin") I
forgot to commit board.bin file and that's why it was not included in the
commit even I had added an entry to WHENCE. Add that now.

At the same time also add Version field for firmware-4.bin.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This makes it easier for downstream distributors to check which files
are clearly distributable without unusual restrictions.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

These files were previously available from
ftp://ftp.qlogic.com/outgoing/linux/firmware

 under a BSD-ish licence.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

The BSDs include the same code under a typical BSD-ish licence, e.g.
http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/dev/microcode/fxp/rcvbundl.h?rev=1.2

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Based on the discussion at <https://bugs.debian.org/502665

>, this is
BSD-licenced.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>