GitLab

Add support for HuC v03.01.2893 for GLK
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

Add support for guC v32.0.3 for GLK
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

Add support for guC v32.0.3 for KBL.
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

Add support for guC v32.0.3 for SKL
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

Add support for guC v32.0.3 for BXT.
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

Add support for v1.8.2893 for BXT huC.
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

Add Support for Icelake DMC.
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

This version includes since v1.06:

1. Fix for the issue where DC_STATE was getting enabled
even when disabled by driver causing data corruption

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

This update includes(since v1.26)

Following additions from ver1.27

1. Fix for the issue where DC_STATE was getting
enabled even when disabled by driver causing data corruption.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

This update includes(since v1.01)

1. Fix for the issue where DC_STATE was getting enabled even
when disabled by driver causing data corruption.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

This update includes(since v9.14)

1. Aggressive DCC implementation for supported platforms.
2. Fixing Issue with Default Guc Log changes for OCA using
special Control Bit

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

This update includes(since v8.7)
1. Fixing Issue with Default Guc Log changes for
OCA using special Control Bit

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

This update includes(since v6.1)

1. Fixing Issue with Default Guc Log changes for
OCA using special Control Bit

Cc: Rodrigo vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

DMC provides additional graphics low-power idle states. It provides
capability to save and restore display registers across these low-power
states independently from the OS/Kernel

This is the first release of DMC for Cannonlake.

This major version will be just upgraded on code when it is required
software changes for API/ABI compatibility.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

DMC provides additional graphics low-power idle states. It provides
capability to save and restore display registers across these low-power
states independently from the OS/Kernel

This is the first release of DMC for Geminilake.

This major version will be just upgraded on code when it is required
software changes for API/ABI compatibility.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

For some reason these 2 files got corrupted
when propagating the release to this repository.

i915 firmware got first release at:
https://01.org/linuxgraphics/downloads/firmware


then propagated to linux-firmware.git.

The version on 01.org are the right ones.

This issue has been identified by Jason. He
noticed that GuC image from linux-firmware.git
wasn't getting loaded on his Kabylake, while
the version on 01.org was working propertly.

In a further review I identified that also GuC
image for Broxton faced a similar issue. All other
files on i915 are the proper one matching with
the ones released on 01.org.

Cc: Jason Curtiss <jason.curtiss@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

This update includes (since v8.12):
     1. Sub-feature level control for power management features.
     2. Clean-up for power management interface.
     3. Bug Fix for multi context scheduler flag.

8.12 contained since v 5.1:
     1. Add per engine preemption support to scheduler
     2. Minor bug fixes
     3. Add support to log media reset count

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

This update contains (since v7.6):
    1. Update parameter name (interface change).
    2. Fix for power impact issue.

7.6 contained since v 5.1:
    1. Add per engine preemption support in scheduler.
    2. Fix for Sleep Shared Area Pointer Validation.
    3. Fix for Golden Context init for Render only for Engine Reset.
    4. Fix for Forcewake Render check.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

This release is to support the following features:
Gen95 HuC KBL BRC Kernel:
-       First release.

Cc:Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

This release is to support the following features:
Gen9 HuC BXT BRC Kernel:
-       Update SkipFrame to avoid conditional batch buffer issue in driver
-       Updated for open source driver
-       Fix overflow issue
-       Enable ME distortion based QP adjustment
-       Fix incorrect cost table loading when ME detection is enabled

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

This release is to support the following features:
Gen9 HuC AVC BRC Kernel:
-       Update SkipFrame to avoid conditional batch buffer issue in driver
-       Updated for open source driver
-       Fix overflow issue
-       Enable ME distortion based QP adjustment
-       Fix incorrect cost table loading when ME detection is enabled

CC: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

1.26 is the stable and recommended firmware for Skylake.
However one conflict in i915 accidentally restored 1.23
making that the default in some kernel out there.

So, let's restore this 1.23 here.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97182


Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

i915 now loads the specific major/minor version of the firmware
instead of loading the symbolic links.

So this patch also removes symbolic links from the firmware
components that never had the firmware loaded directly and
let the symbolic links only for the cases where some versions
of i915 might load the symbolic link while new versions loads
the file directly.

I considered making copies but this would
increase this repository size in ~ 25%.

The symbolic links now on shall never be updated.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

This is the first version of the FW for KBL.

Although we are stepping back from symbolic links,
when kbl_dmc_ver1_01 was introduced there was the link
so let's keep it around for a while.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Following additions from previous version

1. Updated FW to wait for all PLLs to turn on for complete power on.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

This update contains:
1. Fix for engine reset issue of incorrectly decoding engine
   state address.
2. Fix scheduling issue where submit queue of an idle engine
   is not scheduled when another submit queue is full.
3. Reorganized SLPC interface.
4. Enabled IBC (intelligent bias control) for GT3 and GT4.

The interface is changed.
Signed-off-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Version: 1.26
Date   : 02/01/2016
Notes:
Following additions from ver1.26
1. WA for NV12 flicker issues. Fixed HTP for restore program
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

This versions has the risk of  "DMC RAM corruption issue"
fixed on 1.23.

So let's remove old version and let only the latest one available
for now.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Version: 1.23
Date   : 10/19/2015
Notes:
Following additions from ver1.22
1. WA for Palette and DMC RAM corruption issue.

DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.22
DC3_DC5_COUNT                  80030
DC5_DC6_COUNT                  8002C
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

The code points to the major version that is a link to the most
recent one, so we can remove the old firmware blobs.

For tests and validation purposes we will let few minor versions
available, but we need to let linux-firmware repo as
clean as possible, so let's remove old and unused ones.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Version: 1.22
Date   : 9/23/2015
Notes:
Following additions from ver1.21
1. PLL lock wait time updated
2. DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.21
DC3_DC5_COUNT                  80030
DC5_DC6_COUNT                  8002C
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Following additions from previous version

1. Updated FW for NV12 enabling
2. Changes to the waits times for pll enable and disable.
3. Fixed GT interrupts issue
4. DC3_DC5_COUNT: 80038
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Following additions from ver1:

1. Performance Improvement.
2. Fix reset issue.
3. Scheduler fix.
4. Merge in new power management features.
5. Firmware layout changes.
6. Force Fence WA to guarantee correct ordering of GTT writes from uKernel.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

The code points to the major version that is a link to the most
recent one, so we can remove the old firmware blobs.

For tests and validation purposes we will let at least 3 latest
minor available, but we need to let linux-firmware repo as
clean as possible, so let's remove old and unused ones.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Following additions from ver1.20
1. Fixed GT interrupts issue when DC6 is enabled
2. DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.20
DC3_DC5_COUNT                  80030
DC5_DC6_COUNT                  8002C
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Following additions from ver1.19
1. Changes to the waits times for pll enable and disable.
2. DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.19
DC3_DC5_COUNT                  80030
DC5_DC6_COUNT                  8002C
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Following additions from ver1.04
1. No changes to the FW program itself
2. CSS header size field was fixed
3. Date field is fixed in header.
4. DC3_DC5_COUNT � 80038
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Following additions:
  1. Updated FW for NV12 enabling
  3. DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.18 and ver1.17
  DC3_DC5_COUNT                  80030
  DC5_DC6_COUNT                  8002C
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Following additions:
1. No changes to the FW program itself
2. CSS header size field was fixed
3. DMCheader length field is mentioned in dwords instead of bytes
4. Date field is fixed in header.
4. Fixed the DMC Header.HeaderLen issue. The HeaderLen is specified in bytes instead of dwords.
6. DC 5 and 6 count locations are in the below mentioned offsets - same as ver1.16
DC3_DC5_COUNT                  80030
DC5_DC6_COUNT                  8002C
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Following additions:
1. The DE_RRMR and DE_GUCRMR register bits are set before the restore of
the registers to mask the flip done, etc. Once all the registers are
restored, these registers are restored.
2. The pipe interrupt registers are restored only after the plane has
been enabled.
3. Naming of the file changed from .5 to .16 to make it two decimal
points for increased number of versions that can be supported.
4. DC 5 and 6 count locations are in the below mentioned offsets
DC3_DC5_COUNT                  80030
DC5_DC6_COUNT                  8002C
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>