- 23 Jul, 2009 1 commit
-
-
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-firmwareDavid Woodhouse authored
Conflicts: WHENCE
-
- 09 Jul, 2009 2 commits
-
-
Chatre, Reinette authored
Version is now 228.61.2.24 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmwareDavid Woodhouse authored
Conflicts: WHENCE
-
- 01 Jul, 2009 1 commit
-
-
Mauro Carvalho Chehab authored
Thanks to Devin Heitmueller <dheitmueller@kernellabs.com> for getting Xceive permission for redistributing this firmware. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 04 Jun, 2009 1 commit
-
-
Divy Le Ray authored
Update FW to 7.4. Bump up driver revision. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 14 May, 2009 2 commits
-
-
Reinette Chatre authored
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Reinette Chatre authored
Version is now 15.32.2.9 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
- 02 May, 2009 1 commit
-
-
Ken Kawasaki authored
3c589_cs,3c574_cs,serial_cs: (1)add cis(firmware) of 3Com lan&modem mulitifunction pcmcia card. (2)load correct configuration register for 3Com card Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Apr, 2009 1 commit
-
-
Vladislav Zolotarov authored
>From now on FW will be downloaded from the binary file using request_firmware. There will be different files for every supported chip. Currently 57710 (e1) and 57711 (e1h). File names have the following format: bnx2x-<chip version>-<FW version>.fw. ihex versions of current FW files are submitted in the next patch. Each binary file has a header in the following format: struct bnx2x_fw_file_section { __be32 len; __be32 offset; } struct bnx2x_fw_file_hdr { struct bnx2x_fw_file_section init_ops; struct bnx2x_fw_file_section init_ops_offsets; struct bnx2x_fw_file_section init_data; struct bnx2x_fw_file_section tsem_int_table_data; struct bnx2x_fw_file_section tsem_pram_data; struct bnx2x_fw_file_section usem_int_table_data; struct bnx2x_fw_file_section usem_pram_data; struct bnx2x_fw_file_section csem_int_table_data; struct bnx2x_fw_file_section csem_pram_data; struct bnx2x_fw_file_section xsem_int_table_data; struct bnx2x_fw_file_section xsem_pram_data; struct bnx2x_fw_file_section fw_version; } Each bnx2x_fw_file_section contains the length and the offset of the appropriate section in the binary file. Values are stored in the big endian format. Data types of arrays: init_data __be32 init_ops_offsets __be16 XXsem_pram_data u8 XXsem_int_table_data u8 init_ops struct raw_op { u8 op; __be24 offset; __be32 data; } fw_version u8 >From now boundaries of a specific initialization stage are stored in init_ops_offsets array instead of being defined by separate macroes. The index in init_ops_offsets is calculated by BLOCK_OPS_IDX macro: #define BLOCK_OPS_IDX(block, stage, end) \ (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end)) Security: In addition to sanity check of array boundaries bnx2x will check a FW version. Additional checks might be added in the future. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Apr, 2009 1 commit
-
-
David Woodhouse authored
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
- 22 Apr, 2009 3 commits
-
-
maximilian attems authored
by requesting the firmware to only be "used" on Alacritech products the granted distribution right one paragraph above is negated. Signed-off-by: Maximilian Attems <max@stro.at> Signed-off-by: Christopher Harrer <charrer@alacritech.com>
-
Bernd Porr authored
From: Bernd Porr <BerndPorr@f2s.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Bernd Porr authored
These are comedi drivers currently in the kernel staging directory. From: Bernd Porr <BerndPorr@f2s.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
- 21 Apr, 2009 1 commit
-
-
Ken Kawasaki authored
pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 Apr, 2009 1 commit
-
-
- 19 Apr, 2009 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmwareDavid Woodhouse authored
Conflicts: WHENCE
-
- 13 Apr, 2009 1 commit
-
-
Ben Hutchings authored
Add the firmware files for use with rt61pci, rt73usb, rt2860sta and rt2870sta drivers. Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
-
- 10 Apr, 2009 1 commit
-
-
git://git.infradead.org/~dwmw2/firmware-2.6Linus Torvalds authored
* git://git.infradead.org/~dwmw2/firmware-2.6: qla1280: Fix off-by-some error in firmware loading. Add README.AddingFirmware file. Basically telling people not to. firmware: Remove newly-added slicoss and sxg firmware images firmware/WHENCE: Add missing origin information for Ambassador atmsar11.fw ALSA: wavefront - Always use request_firmware() Remove fdump tool for av7110 firmware firmware: convert av7110 driver to request_firmware() Partially revert "V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card" Revert "fix modules_install via NFS" Add-add conflicts in firmware/WHENCE fixed manually
-
- 07 Apr, 2009 3 commits
-
-
David Woodhouse authored
These are available elsewhere (for example in the linux-firmware.git repository); they have no business being added to the kernel source tree. We are only putting stuff in the firmware/ directory of the kernel source when it's extracted from long-standing drivers which used to include it directly. We didn't intend to open the floodgates to including megabytes of new firmware which was previously being distributed separately. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: b44: Use kernel DMA addresses for the kernel DMA API forcedeth: Fix resume from hibernation regression. xfrm: fix fragmentation on inter family tunnels ibm_newemac: Fix dangerous struct assumption gigaset: documentation update gigaset: in file ops, check for device disconnect before anything else bas_gigaset: use tasklet_hi_schedule for timing critical tasklets net/802/fddi.c: add MODULE_LICENSE smsc911x: remove unused #include <linux/version.h> axnet_cs: fix phy_id detection for bogus Asix chip. bnx2: Use request_firmware() b44: Fix sizes passed to b44_sync_dma_desc_for_{device,cpu}() socket: use percpu_add() while updating sockets_in_use virtio_net: Set the mac config only when VIRITO_NET_F_MAC myri_sbus: use request_firmware e1000: fix loss of multicast packets vxge: should include tcp.h Conflict in firmware/WHENCE (SCSI vs net firmware)
-
David Woodhouse authored
Looks like we forgot to update WHENCE when we converted this driver. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
- 06 Apr, 2009 4 commits
-
-
Takashi Iwai authored
Always use request_firmware() for loading yss225_registers image. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
Jaswinder Singh authored
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-
git://git.kernel.org:/pub/scm/linux/kernel/git/dwmw2/linux-firmwareDavid Woodhouse authored
Conflicts: WHENCE
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (74 commits) [SCSI] sg: fix q->queue_lock on scsi_error_handler path [SCSI] replace __inline with inline [SCSI] a2091: make 2 functions static [SCSI] a3000: make 2 functions static [SCSI] ses: #if 0 the unused ses_match_host() [SCSI] use kmem_cache_zalloc instead of kmem_cache_alloc/memset [SCSI] sg: fix iovec bugs introduced by the block layer conversion [SCSI] qlogicpti: use request_firmware [SCSI] advansys: use request_firmware [SCSI] qla1280: use request_firmware [SCSI] libiscsi: fix iscsi pool error path [SCSI] cxgb3i: call ddp release function directly [SCSI] cxgb3i: merge cxgb3i_ddp into cxgb3i module [SCSI] cxgb3i: close all tcp connections upon chip reset [SCSI] cxgb3i: re-read ddp settings information after chip reset [SCSI] cxgb3i: re-initialize ddp settings after chip reset [SCSI] cxgb3i: subscribe to error notification from cxgb3 driver [SCSI] aacraid driver update [SCSI] mptsas: remove unneeded check [SCSI] config: Make need for SCSI_CDROM clearer ...
-
- 04 Apr, 2009 2 commits
-
-
Michael Chan authored
Based on original patch by Ben Hutchings <ben@decadent.org.uk> and Bastian Blank <waldi@debian.org>, with the following main changes: Separated the mips firmware and rv2p firmware into different files to make it easier to update them separately. Added some code to fixup the rv2p code with run-time information such as PAGE_SIZE. Update version to 2.0.0. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jaswinder Singh Rajput authored
Firmware blob looks like this... __be16 lanai4_data_size unsigned char lanai4_code[] Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 03 Apr, 2009 9 commits
-
-
Mithlesh Thukral authored
Specify a license for the Alacritech Sahara (10Gbe) and SLICOSS (1GBE) firmware files. Signed-off-by: Christopher Harrer <charrer@alacritech.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mithlesh Thukral authored
Add support for downloading the firmware using kernel-builtin mechanism. This will remove the need for the firmware files in the driver source code. Signed-off-by: Christopher Harrer <charrer@alacritech.com> Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Lior Dotan authored
Adds the firmware to the firmware directory in ihex format so it can be installed when doing make firmware_install. Also update the firmware location in the driver code so it can locate the files in the right place. This should conclude the move to request_firmware(). Signed-off-by: Lior Dotan <liodot@gmail.com> Cc: Christopher Harrer <charrer@alacritech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Woodhouse authored
-
Jaswinder Singh Rajput authored
Firmware blob is little endian Thanks to Stephen Rothwell for fixing typos Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Jaswinder Singh Rajput authored
Firmware blob looks like this... __le32 checksum unsigned char data[] Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Jaswinder Singh Rajput authored
Firmware blob is little endian looks like this... unsigned char Version1 unsigned char Version2 unsigned char Version3 unsigned char Padding unsigned short start_address unsigned short data Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Mauro Carvalho Chehab authored
Add firmwares for those V4L/DVB devices: CX23418 PCI Broadcast A/V with MPEG encoder CX25843 sideport Broadcast A/V decoder CX23885 PCI Express Broadcast A/V decoder Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmwareDavid Woodhouse authored
(Don't delete old cxgb3/t3fw-7.0.0.bin file)
-
- 30 Mar, 2009 3 commits
-
-
Jaswinder Singh Rajput authored
Added osi_load_firmware() instead of copying same thing twice Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
-
Jaswinder Singh Rajput authored
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
-
Jaswinder Singh Rajput authored
Added predef variable in add_mcs() to support predefined mcs data Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
-
- 18 Mar, 2009 1 commit
-
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-