GitLab

Add AMD Secure Encrypted Virtualization (SEV) firmware to allow for the
updating of the SEV firmware outside of BIOS releases. Naming convention
and directory structure follows the convention defined in the kernel
driver in drivers/crypto/ccp/psp-dev.c

SEV firmware files are to be placed in the "amd" directory and names
should follow the pattern: amd_sev_fam<FAMILY>h_model<MODEL>h.sbin

where FAMILY is the two-digit hexadecimal value of the target processor
family (e.g. 17)

where MODEL is the two-digit hexadecimal value of the target processor
model (e.g. 01) or where the least significant nibble of the two-digit
hexadecimal value can be an 'x' to indicate a range of models
(e.g. 0x for 00 to of).

The firmware provided is version 0.17 build 11 and is for AMD family
17h processors with models in the range 00h to 0fh.
Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Delete the reference to an amdgpu file that was removed, and fix
the missing quote for one of the raspberrypi files.
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch updates the firmware file for Intel Bluetooth 9560
Also it is known as Intel JeffersonPeak (JfP).

FW Build: REL0395

Release Version: 20.110.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch updates the firmware file for Intel Bluetooth 9260
Also it is known as Intel ThunderPeak (THP).

FW Build: REL0395

Release Version: 20.110.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This commit will add required firmware files for wcn3990.
crbtfw21.tlv : RAM FW dump
crnv21.bin : NVM dump.

Updated the Qualcomm Atheros licence file.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>

These NVIDIA-signed firmwares are required to enable the Cypress
Type-C controller on TU10x GPUs.

FW versions:
	Secondary: 42
	Primary: 3.1.10
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>

This patch adds new FW for bnx2x, which adds the following:
 - TX VLAN filtering support.
 - Enable TPA only for packets without VLAN.

It also addresses few critical issues,
 - Fairness algorithm misbehaviour when minimum bandwidth configured
   for all PFs.
 - Error recovery issue on TAPE devices.
 - FW not discarding FIP frames that are not designated to PF.
 - Kernel driver initialization failure after preboot driver.
 - VxLAN stops working after sending inner IP fragmented traffic.
 - Issues in the following FW flows:
    SD VLAN update, TX packet drop, packet padding flow, vlan add/remove.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

From internal git commit:
534e4d6a23b55c75a4b60ebdb323118ee1f4e08d
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

WLAN (PCIe) firmware version: W16.68.1.p195
Bluetooth (USB) firmware version: 16.26.1.p195

In PCIe-USB chipset, WLAN is over PCIe whereas bluetooth is over
USB. The combo image will be downloaded through WLAN only.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>

WLAN (SDIO) firmware version: W15.68.19.17
Bluetooth (SDIO) firmware version: 15.26.19.17
The combo image can be downloaded through either WLAN or
Bluetooth.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>

WLAN (SDIO) firmware version: W16.68.1.p195
Bluetooth (SDIO) firmware version: 16.26.1.p195

Both WLAN and bluetooth are on SDIO interface.
The combo image can be downloaded either through WLAN or
Bluetooth.
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Hemantkumar Suthar <shemant@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Add a NVRAM file for the BCM43455 Wifi/BT moduele as used on the
Raspberry Pi 3 Model B+.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

BCM43430 NVRAM config file for the RPi3 Model B was set to the value
found by brcmf_dmi_probe(), but should use the DT compatible.
Rename the file to actually make it work with the kernel driver.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

From internal git commit:
031c3840bbdbdc1cc9b2b480bb7d8344f72887ed
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

From internal git commit:
031c3840bbdbdc1cc9b2b480bb7d8344f72887ed
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This reverts commit fca59582.

This patch updates the firmware file for Intel Bluetooth 8265
Also it is known as Intel WindStormPeak (WsP).

FW Build: REL0295

Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch updates the firmware file for Intel Bluetooth 8260
also it is known as Intel Snowfield Peak (SfP)

FW Build: REL0522

Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch updates the firmware file for Intel Bluetooth 9260
Also it is known as Intel ThunderPeak (THP).

FW Build: REL0386

Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch updates the firmware file for Intel Bluetooth 9560
Also it is known as Intel JeffersonPeak (JfP).

FW Build: REL0386

Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the BCM43430 Wifi/BT module as used on the
Raspberry Pi 3 Module B.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

Add a NVRAM file for the BCM43455 Wifi/BT moduele as used on the
Raspberry Pi 3 Model B+.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

WLAN (USB8801) firmware version: W14.68.36.p138
These devices are WLAN only.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>

Add new versions of the firmwares for 9260 and 9000.

Build number: Core_build_core40-120
Revision numbers: 95eb4e97 (9260, 9000)
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>

Add a NVRAM file for the Ampak AP6330 Wifi/BT module as used on the
Prowise PT301 tablet. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Prowise PT301 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the Broadcom 43430 WiFi/BT chip as found on the
Chuwi Vi8 Plus tablet's mainboard. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Chuwi Vi8 Plus tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the Ampak AP6234 Wifi/BT module as used on the
Meegopad T08 HDMI stick. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Meegopad T08 HDMI stick.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the Ampak AP6212 Wifi/BT module as used on the
Jumper EZpad mini 3 tablet. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Jumper EZpad mini 3 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the Ampak AP6212 Wifi/BT module as used on the
ONDA V80 Plus tablet. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the ONDA V80 Plus tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the Ampak AP6356 Wifi/BT module as used in the
GPD win handheld. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the GPD win handheld.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Lemaker, the manufacturer of the Banana Pro board has always shipped
the NVRAM file from the Cubietech Cubietruck wifi for use with the
Ampak AP6181 43362 WiFi/BT module on the Banana Pro.

This commit adds a symlink from brcmfmac43362-sdio.lemaker,bananapro.txt
to brcm/brcmfmac43362-sdio.cubietech,cubietruck.txt to match this, making
the Wifi on the Banana Pro work OOTB.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the Ampak AP6210 Wifi/BT module as found on the
Cubietech Cubietruck board. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Cubietech Cubietruck board.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

We are going to add more brcmfmac NVRAM files and some of these will have
spaces in their names, lets be consistens and use quotes around the
filenames of all brcmfmac NVRAM files.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

These files come from the RealtekBluetoothUartPackage_2.17.119.0525 file
which can be downloaded from realtek.com. The download is marked as version
1.0.245.3 / 05/08/2017 on the download page.

The added rtl_bt/rtl8723bs_fw.bin file is called
rtl8723b_mp_bt40_fw_asic_rom_patch.bin in the download.

The added rtl_bt/rtl8723bs_config-OBDA8723.bin file is the
rtl8723b_config_internal.bin file with the UART baudrate changed to
1500000 bps.

I've examined aprox. 20 different Intel BYT/CHT boards, with an RTL8723BS
with the OBDA8723 ACPI ID for the bluetooth part. On these boards the
original firmware image uses either 1500000 or 3000000 bps, so 1500000 bps
is chosen as the safe option which should work everywhere.

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add new versions of the firmwares for 8000C, 8265.

Build number: Core_build_core40-100
Revision numbers: 9f0a2d68 (8000C, 8265)
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

A new -43.ucode for 9000 series.

Build number: Core_build_core40-97
Revision number: c73114b3
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>