GitLab

The nvram file contains configuration info for firmware which varies
with different hardware designs. The version currently in the
repository is for a Broadcom-internal development board that is not
available on the market. This file is not applicable for any exsisting
end-user product. Users should use the nvram file that was
shipped with their device to avoid unexpected or incorrect behavior.
Remove the file from repository to avoid confusion.
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This is the initial version of bcm4330 firmware of brcmfmac
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This patch adds new version of bcm4329 firmware image for brcmfmac
from 3.3 or later kernel.
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-6000g2b-ucode-18.168.6.1.tgz

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>

http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-2030-ucode-18.168.6.1.tgz

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>

http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-2000-ucode-18.168.6.1.tgz

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>

http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-135-ucode-18.168.6.1.tgz

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>

isci requires a parameter blob which is usually found in NVRAM, but it
can fall back to loading with request_firmware().  These files are
taken from the Linux source tree where they were wrongly added in
Linux 3.0.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

New firmware fixes iSCSI problems with some LeftHand targets that don't
set TTT=0xffffffff for Data-In according to spec.  Firmware generates
exception warnings for this condition and becomes very slow.  This is
fixed by suppressing these warnings when using default error mask.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

To fix bugs when running offloaded FCoE/iSCSI traffic in multiple
Class of Service environments.  In some scenarios, traffic could stop
on certain rings and eventually all traffic would stop.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Export the blobs to linux-firmware; keep the previous versions]

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

The commands given in the source aren't quite right, and don't cover
use of ihex2fw.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Downstream commercial distributors need to distribute the source code
as well as the binary.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Some small amount of postprocessing is required after assembling
bootstrap.asm with a56.  Add a script and makefile for this.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Add new firmware:
1. rtl_nic/rtl8402-1.fw
   version: 0.0.1
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Add new firmware:
1. rtl_nic/rtl8411-1.fw
   version: 0.0.1
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Add new firmware:
1. rtl_nic/rtl8168f-1.fw
   version: 0.0.3
2. rtl_nic/rtl8168f-2.fw
   version: 0.0.3
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Updated firmware with stability fixes.
Version: 0.0.3
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Includes fixes for the following issues:
  1. (iSCSI) Arrival of un-solicited ASYNC message causes
     firmware to abort the connection with RST.
  2. (FCoE) There is a probability that truncated FCoE packet on
     RX path won't get detected which might lead to FW assert.
  3. (iSCSI) Arrival of target-initiated NOP-IN during intense
     ISCSI traffic might lead to FW assert.
  4. (iSCSI) Chip hangs when in case of retransmission not aligned
     to 4-bytes from the beginning of iSCSI PDU.
  5. (FCoE) Arrival of packets beyond task IO size can lead to crash.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

This patch adds the inital version of newly formatted firmware
for ath6kl driver.
Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Update firmware for QLogic Intelligent Ethernet (3000 and 3100 Series)
Adapters to revision 4.0.579.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

The driver requests "lbtf_usb.bin".
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Add new firmware:
1. rtl_nic/rtl8168f-1.fw
   version: 0.0.2
2. rtl_nic/rtl8168f-2.fw
   version: 0.0.2
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Updated firmware with stability fixes.
Version: 0.0.2
Signed-off-by: Hayes Wang <hayeswang@realtek.com>

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

The new wl12xx fw (ver 7.3.0.0.77) had some major api changes.
The main change was the addition of multi-role concept.
For each chip there are two FW kind:
1) A single FW for both STA and AP roles
2) PLT FW that support calibration process

Update FW for WL128x chip to  7.3.0.0.77:
  STA & AP FW version
  PLT FW version

Update FW for WL127x chip 6.3.0.0.77:
  STA & AP FW version
  PLT FW version

Create a soft symbolic link wl12xx-nvs.bin that link to one of
the examples NVF files (by default wl127x)
Signed-off-by: Shahar Levi <shahar_levi@ti.com>

Update FW for WL128x chip:
 STA FW version 7.1.5.50.74
 AP FW version 7.2.1.0.54

Update FW for WL127x chip:
 STA FW version 6.1.5.50.74
 AP FW version 6.2.1.0.54
Signed-off-by: Shahar Levi <shahar_levi@ti.com>

These blobs are released by the OLPC project, and drive Marvell
libertas chips.  OLPC hardware has additional features and quirks,
which makes special firmware necessary.  The 'lbtf' blobs are
thin firmware, which allows the Linux drivers more control over
the device's functionality.

The firmware was downloaded from
http://dev.laptop.org/pub/firmware/libertas/

.
Signed-off-by: Andres Salomon <dilinger@queued.net>

Signed-off-by: Dan Williams <dcbw@redhat.com>

Move ENE UB6250 SD/MS card firmware from driver/staging/keucr, and
convert it from HEX to using request_firmware()
Most for this patch is from huajun.li.lee@gmail.com sent at
2011-03-02,only added the ms card reader firmware and LICENCE of
firmware from ENE.
Signed-off-by: Cho, Yu-Chen <acho@novell.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

New version 17.168.5.3

Changelog
- Add "low temperature" support
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: Benny Chuang <bchuang@qca.qualcomm.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: Benny Chuang <bchuang@qca.qualcomm.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

The drxk driver allows a per-device firmware, as it seems to
be required. Terratec granted us permission to use the firmware
found at H5 for their devices. Add it to the linux-firmware tree.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

This FW supports multiple concurrent classes of service in network traffic.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

v1.1:
* Revamp target capabilities.
* Fix WEP/TKIP.
* Fix BTCOEX.

v1.2:
* Remove TPC for UB94.
* Increase TX buffers count to 48 for UB94/95
* Fix TX power for beacon frames
* Add WMI_BITRATE_MASK_CMDID.
* Fix minimum rate selection for management frames.
* General code scrub.

v1.3:
* Remove unused PHY modes (TURBO etc.)
* Remove unused MIMO PS code.
* Cleanup node flags.
* Remove FastFrame code.
* Fix various bugs in management frame transmission.
* Fix duration calculation.
* Fix packet type calculation.
* Enable CAB queue for UB94/95.
* Fix sequence number assignment.
* Remove vendor-specific hacks.
* Add TX completion for multicast packets.
* Various code cleanups.
* Reduce credit size for UB94/95 to 45.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

 - Add a separate directory for the bnx2x FW.
 - Post a new FW version: 7.0.20.0
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

update iwlwifi-1000-5.ucode for 1000 series devices
version: 39.31.5.1

Changlog
 - fix "tid mismatch" issue
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Updated version 9.221.4.1
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>