GitLab

This was added in commit ed6f89bb after being wrongly removed in
commit 8d1f7a11

.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

These were added in commits 40696430, 9693ff6d

.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Alex Deucher <alexander.deucher@amd.com>

Fix filename 'intel/dsp_fw_bxtn.bin'.  List all the files and their
versions, not just the symlinks.  Delete the non-standard 'md5sum'
fields.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Vinod Koul <vinod.koul@intel.com>

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This was the licence text for mwl8335_duplex.fw which has already been
removed.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>

The 'sources' appear to be the names of ihex files, not actual source
code, and in any case those files are not included in this repository.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This stops check_whence.py complaining about Makefiles etc.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

The script compares the files listed in WHENCE (or otherwise expected)
and the files known to git, and reports all differences as errors.

Add a 'check' rule to the Makefile that runs this.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

From internal commit:
49e34ed4d5555269b78c4558a00149193572717a
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

This patch releases firmware for the BCM43430 and BCM43438 chipset. The
latter is found on the Raspberry Pi 3.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

Based on internal commit:
62bcdaba6d7d3000ebf7a04a685f0f03a13f7ab3

Carrizo version: 1.87
Tonga version: 1.65.10
Fiji version: 1.87.12
Stoney version: 1.38.15
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

WHENCE file is updated to reflect SD/PCIe8897 and PCIe8997 firmware
versions.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>

Firmware version for these images is 16.68.1.p70

PCIe-USB and PCIe-UART are two variant of PCIe8997 chipset in which WLAN
is over PCIe whereas bluetooth can be over USB or UART bus.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>

Update MT8173 VPU firmware for decoder and
MDP (Media Data Path).

Release Version: 1.0.2
Signed-off-by: Andrew-CT Chen <andrew-ct.chen@mediatek.com>

Add platform data for channel tuning on Intel OPA HFI adapter 100 series
Signed-off-by: John Fleck <john.fleck@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>

This device is a new model from Realtek. Updates to driver btrtl will
soon be submitted to the kernel.

These files were provided by the Realtek developer.
Signed-off-by: 陆朱伟 <alex_lu@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: linux-bluetooth@vger.kernel.org
[bwh: Fixed the filename wildcard in WHENCE]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

rt3071.bin is a copy of the second firmware image in rt2870.bin,
used only by the old rt2870sta driver.

Update it to version 0.36.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Adding support for new QCA6174 board types.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

QCA9984 is a new chip supported by ath10k. Firmware version is 10.4-3.2-00072.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

QCA9888 is a new chip supported by ath10k. Firmware version is 10.4-3.2-00072.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

QCA9887 is a new chip supported by ath10k. Firmware version is 10.2.4-1.0-00013.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

QCA4019 is a new chip supported by ath10k. Firmware version is 10.4-3.2.1-00028.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

This new firmware for the qed* adpaters fixes several issues:
 - Better blocking of malicious VFs.
 - After FLR, Tx-switching [internal routing] of packets might
   be incorrect.
 - Deletion of unicast MAC filters would sometime have side-effect
   of corrupting the MAC filters configred for a device.
It also contains fixes for future qed* drivers that *hopefully* would be
sent for review in the near future.

In addition, it would allow driver some new functionality, including:
 - Allowing PF/VF driver compaitibility with old drivers [running
   pre-8.10.5.0 firmware].
 - Better debug facilities.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

This patch updates the firmware files for R-Car H3 and M3-W to fix
the device detection issue.

The md5sum of the files are:
645db7e9056029efa15f158e51cc8a11  r8a779x_usb3_v2.dlmem
687d5d42f38f9850f8d5a6071dca3109  r8a779x_usb3_v3.dlmem
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

This version firmware fixed the USB3 lanes config bug.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

This updates Broxton audio dsp firmware to latest version

The version of this firmware release is 9.22.00.1118

The md5sum of this firmware binary is 469dfcf5b2ebbc58505a0cca23303723
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

This updates Kabylake audio dsp firmware to latest version.

The version of this firmware release is 9.21.00.1037

The md5sum of this firmware binary is e71a2421565fadae228b3924d9510bcb.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

1.26 is the stable and recommended firmware for Skylake.
However one conflict in i915 accidentally restored 1.23
making that the default in some kernel out there.

So, let's restore this 1.23 here.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97182


Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

This updates Skylake audio dsp firmware, this version contains update to
support setting of multiple coefficients with one large IPC.

The version of this firmware release is 8.20.00.958.

The md5sum of this firmware binary is 02bd300f5ef85ae04afffd7c0ef50c46.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Update to internal commit:
3b96115d73130bcce98a545e9f5ab86e8230878d
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

Update firmware to v2.6, it support standby, controlled by mailbox
commend. And update the licence.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>

The firmware source (alongside with the usbduxsigma.c)
was updated in 2015 during a major rewrite but
its binary was still the old one which caused the
kernel driver to fail. This fix provides the matching
firmware binary. This was created by invoking
"make -f Makefile_dux" which creates the firmware binary.

Signed-off-by: tech@linux-usb-daq.co.uk
Signed-off-by: Kyle McMartin <kyle@kernel.org>