GitLab

On 21/04/2021 13:23, Josh Boyer wrote:
> On Mon, Apr 19, 2021 at 1:38 PM Michel Piquemal <spam@ipik.org> wrote:
>>
>> Raspberry Pi Zero W has no NVRAM files specified and dmesg reports the
>> following error at boot:
>> brcmfmac mmc1:0001:1: Direct firmware load for
>> brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2
>>
>> Pi Zero W uses same wifi BCM43430 module than Pi 3 model B:
>> symlinking to that Pi 3b NVRAM file fixes the issue, and wifi works as
>> expected.
>>
> Your patch is corrupted and doesn't apply.  Please update your local
> tree to the latest in git and resend.
>
> josh
>

Hi. Apologies it got mangled by mail client; here it is again:
Signed-off-by: Michel Piquemal <spam@ipik.org>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

1. rtl8153c-1 v1 03/31/21.
2. rtl8156a-2 v1 04/15/21.
3. rtl8156b-2 v1 04/15/21.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Signed-off-by: Raju Rangoju <rajur@chelsio.com>

Add latest verified version of Mellanox Spectrum-family switch firmware,
for Spectrum (13.2008.2438), Spectrum-2 (29.2008.2438) and Spectrum-3
(30.2008.2438).

This update fixes the following issues:

- An issue where strictly-prioritized traffic gets a 9usec latency penalty
  on a congested port.
- Attempts to configure DSCP prioritization (QPDM register) on CPU
  port (local port 0) would result in FW crash.
- An issue in sampling traffic to the CPU due to incorrect trap
  prioritization.
- An issue in bulk-reading flow counters.
- Several issues related to FW upgrade and in-service FW upgrade.
- Incomplete clearing of activity bits in ECMP containers with a very high
  number of individual ECMP entries (100K).
- A crash during router deinit.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

The kernel when booted in ACPI mode with SMBIOS/DMI
data uses the DMI data to set the machine
manufacture/model.

The WiFi driver uses the machine string to select the
correct firmware image. Because of this, an additional
link to select the correct firmware is needed.

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Peter Robinson <pbrobinson@gmail.com>
Cc: Josh Boyer <jwboyer@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch adds new firmware file for Intel Bluetooth AX201
Also it is known as Intel HarrisonPeak (HrP)

FW Build: REL23303

Release Version: 22.50.0.2
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

linux-firmware ships no config file for rtl8821a, as it seems
quite similar to rtl8821c add symlink to that config file
see https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1784835
(Maintainers may replace with proper file).

fixes: https://bugs.debian.org/893912



-- error
[    2.574742] Bluetooth: hci0: rtl: loading rtl_bt/rtl8821a_config.bin
[    2.575137] bluetooth hci0: firmware: failed to load
rtl_bt/rtl8821a_config.bin (-2)
[    2.575143] bluetooth hci0: Direct firmware load for
rtl_bt/rtl8821a_config.bin failed with error -2
[    2.575145] Bluetooth: hci0: Failed to load rtl_bt/rtl8821a_config.bin
--

-- with config file
[   26.389532] Bluetooth: hci0: RTL: rtl: examining hci_ver=06
hci_rev=000a lmp_ver=06 lmp_subver=8821

[   26.390623] Bluetooth: hci0: RTL: rom_version status=0 version=1

[   26.390624] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8821a_fw.bin

[   26.392597] bluetooth hci0: firmware: direct-loading firmware
rtl_bt/rtl8821a_fw.bin
[   26.392605] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8821a_config.bin

[   26.392748] bluetooth hci0: firmware: direct-loading firmware
rtl_bt/rtl8821a_config.bin
[   26.392757] Bluetooth: hci0: RTL: cfg_sz 10, total sz 17438
--

Cc: Max Chou <max.chou@realtek.com>
Reported-by: Kate Komi <katahipo@gmail.com>
Signed-off-by: maximilian attems <maks@stro.at>

New in this release:
  - Support for ipv6 tunneling
  - Handling of QinQ matching/actions

Improvements:
  - Fix for performance regression under overload conditions
  - Better handling of tunnel flow-merge cases
  - Fix performance regression when tso is enabled with ipv6 traffic
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Tested-by: Charles Murcott <charles.murcott@netronome.com>
Reviewed-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>

from internal git commit:
5a333628689f142376b8c5b7187f1cf0a8d5abac
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Some x86/ACPI devices such as the Acer Aspire Switch 10E (SW3-016),
use an alternative ACPI hardware-id (HID) for the BT part of the
RTL8723BS chip.

Instead of using the standard OBDA8723 HID this device uses a HID
of OBDA0623. Despite using a different HID it does work fine with
the default config settings from the rtl8723bs_config-OBDA8723.bin
file. Add a symlink to that file, to fix BT not working on this
device due to a missing config file.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the brcmfmac43430a0 wifi/bit chip found on the
Chuw Hi8 (CWI509) tablet. This is based on copy of the existing
brcm/brcmfmac43430a0-sdio.jumper-ezpad-mini3.txt NVRAM file with some
the calibration values adjusted for the Chuwi Hi8 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the brcmfmac43340 wifi/bit chip found on the
predia-basic tablet. This is based on copy of the existing
brcm/brcmfmac43340-sdio.meegopad-t08.txt NVRAM file with some the
calibration values adjusted for the Predia Basic tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Update remoteproc firmware to the following versions:
- ADSP.HT.5.3.c2-00058-SM8250-3
- CDSP.HT.2.3.c1-00060-SM8250-2
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

A new GPU from AMD.

From internal git commit:
5a333628689f142376b8c5b7187f1cf0a8d5abac
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch adds new firmware file for Intel Bluetooth AX210
Also it is known as Intel TyphoonPeak (TyP)

FW Build: REL21046

Release Version: 22.40.0.2
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch adds new firmware file for Intel Bluetooth AX200
Also it is known as Intel CyclonePeak (CcP).

FW Build: REL21113

Release Version: 22.40.0.2
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch adds new firmware file for Intel Bluetooth AX201
Also it is known as Intel HarrisonPeak (HrP)

FW Build: REL21113

Release Version: 22.40.0.2
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This also brings in a new binary file, called PNVM, that is loaded
separately by the driver.

Build number: Core_build_core59-66
Revision: 49eeb572 (cc, Qu, QuZ, ty)
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

Build numbers: Core_build_core59-66
Revision: 6f9f215c (9000, 9260)
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

Build number: N/A
Revision: f2390aa8 (7265D)
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

Add latest verified version of Mellanox Spectrum-family switch firmware,
for Spectrum (13.2008.2406), Spectrum-2 (29.2008.2406) and Spectrum-3
(30.2008.2406).

This release contains the following fixes and improvements:

- MIRROR_SAMPLER_ACTION.mirror_probability_rate inverted.
- When adjacency is replaced-if-inactive (RATR.opcode=3), bad parameter was
  reported when replacing an active entry.
- TC pool occupancy watermark not cleared after port splits.
- Per-TC counter of ECN-marked packets supported.
- When duplicating VXLAN packets for head-end replication, number of
  lookups was limited to 254, while Spectrum>=2 support 4K.
- Deadlock on port activation when 3 1x ports are active in a single port
  cluster on Spectrum-3.
- A storm of congestion threshold events generated on stably-congested
  traffic when a 200 Gbps port is flapped on Spectrum-3.
- Incorrect early scheduling parameters for 50G 2-way split on Spectrum-2.
- Timeouts when accessing certain CRspace addresses.
- Enable sampling trapped packets.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add binary firmware for MT7921 based devices

File: mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin
Version: 20210223142901
Signed-off-by: mark-yw.chen <mark-yw.chen@mediatek.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add firmware to support Realtek RTL8852A chip.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Fixes (Debian bug #982579):
> [   11.957171] brcmfmac mmc2:0001:1: firmware: failed to load
brcm/brcmfmac43430-sdio.sinovoip,bpi-m3.txt (-2)
> [   11.967106] firmware_class: See https://wiki.debian.org/Firmware

 for
information about missing firmware
> [   11.977035] brcmfmac mmc2:0001:1: firmware: failed to load
brcm/brcmfmac43430-sdio.txt (-2)
> [   12.994756] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl
0x50
Reported-by: Bernhard <bewoern1@gmail.com>
Signed-off-by: maximilian attems <maks@stro.at>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Fixes ( Debian bug #982579 [1]):
 [   10.514530] brcmfmac mmc2:0001:1: firmware: direct-loading firmware brcm/brcmfmac43430-sdio.bin
 [   10.514732] brcmfmac mmc2:0001:1: firmware: failed to load brcm/brcmfmac43430-sdio.sinovoip,bpi-m2-ultra.txt ( -2)

Refs:
[1] https://bugs.debian.org/982579

Reported-by: Bernhard <bewoern1@gmail.com>
Signed-off-by: maximilian attems <maks@stro.at>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add version 3.12.1 (released the 2021-02-18) of firmware for Silabs
WF200. This firmware is necessary for the wfx driver currently hosted in
the staging/ directory of the Linux kernel.

Here the last modifications (only modifications tagged [LMAC] have an
impact on Linux):

New Features/Improvements:
    [1725] - [UMAC] Wi-Fi power mode API with 'listen_interval = 0' is
                    taken into account

Bug fixes:
    [1710] - [UMAC] Increase WPA3 connection authentication timeout
    [1712] - [LMAC] Avoid beacon collision in concurrent mode
    [1726] - [LMAC] Fix 'incoherent status and result_flags' warning
    [1730] - [UMAC] Fix incorrect packet abort leading to assert

From internal git commit:
b023938b474d8c2b4000b8d3beb3cfd8474f652b
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add latest verified version of Mellanox Spectrum-family switch firmware,
for Spectrum (13.2008.2304), Spectrum-2 (29.2008.2304) and Spectrum-3
(30.2008.2304).

This release fixes the following issues (among others):

- Rx pause packet reaction latency on Spectrum-3
- Certain high-numbered flow counters would not work on Spectrum-2.
- FW freeze on Spectrum-1 when under heavy PTP traffic load.
- Mirroring traffic to the CPU on Spectrum-2.
- Shared headroom would not be exhausted before drops started occurring.
- Per-priority Rx discard counters were not always cleared.
- 400-Gbps ports with PFC enabled kept sending pause frames without buffer
  pressure.
- Several issues in flow control and traffic admittance, and FW freeze
  after an on-the-fly shared buffer reconfiguration.
- A number of issues in forwarding line speed traffic to partially split
  8x ports on Spectrum-3.
- A number of issues related to in-service FW upgrade (ISSU / ISFU).
- Port shaper influenced ingress rate when PFC was enabled.
- FW freeze after a port was set admin down when unrelated ports were
  congested.

And includes the following new feature:

- Improvements to counter read performance
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add binary firmware for MT7921 based devices

File: mediatek/WIFI_MT7961_patch_mcu_1_2_hdr.bin
Version: 20210122002654a
File: mediatek/WIFI_RAM_CODE_MT7961_1.bin
Version: 20210122002730
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch adds new firmware file for Intel Bluetooth AX210
Also it is known as Intel TyphoonPeak (TyP)

FW Build: REL19922

Release Version: 22.30.0.4
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch adds new firmware file for Intel Bluetooth AX200
Also it is known as Intel CyclonePeak (CcP).

FW Build: REL19994

Release Version: 22.30.0.4
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch adds new firmware file for Intel Bluetooth AX201
Also it is known as Intel HarrisonPeak (HrP)

FW Build: REL19994

Release Version: 22.30.0.4
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This is the first official release of ADLS DMC.
xy
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

This is first release of HuC for DG1.
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

This is the first release of guC for DG1.
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>

Add firmware VIDEO.VPU.1.0-00087-PROD-1 for the Qualcomm Venus.

Used on the Robotics RB5 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Add test signed firmware CDSP.HT.2.3.c1-00044-SM8250-2 for the Qualcomm
SM8250 Compute DSP.

Used on the Robotics RB5 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Add test signed firmware ADSP.HT.5.3.c2-00055-SM8250-2 for the Qualcomm
SDM8250 Audio DSP.

Used on the Robotics RB5 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Used on Robotics RB5 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

The kernel when booted in ACPI mode with SMBIOS/DMI
data uses that data to set the machine manufacture/model.

The RPi's WiFi driver uses the machine string to
select the correct firmware image. Because of
this, an additional link to select the correct
firmware is needed.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>