GitLab

The following fw files are added to support QCA6174.
rampatch_00440302.bin: RAM DUMP
nvm_00440302.bin: NVRAM
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>

Delete the reference to an amdgpu file that was removed, and fix
the missing quote for one of the raspberrypi files.
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Signed-off-by: Josh Boyer <jwboyer@kernel.org>

From internal git commit:
5c6e3eb13d45165071a4c9d77f3d125a975be356

Fixes a graphics powergating issue.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

There is only one sdma engine on raven2.  No need for
the second firmware.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch updates the firmware file for Intel Bluetooth 9560
Also it is known as Intel JeffersonPeak (JfP).

FW Build: REL0395

Release Version: 20.110.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch updates the firmware file for Intel Bluetooth 9260
Also it is known as Intel ThunderPeak (THP).

FW Build: REL0395

Release Version: 20.110.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This commit will add required firmware files for wcn3990.
crbtfw21.tlv : RAM FW dump
crnv21.bin : NVM dump.

Updated the Qualcomm Atheros licence file.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>

Signed-off-by: Josh Boyer <jwboyer@kernel.org>

These NVIDIA-signed firmwares are required to enable the Cypress
Type-C controller on TU10x GPUs.

FW versions:
	Secondary: 42
	Primary: 3.1.10
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>

Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Merge branch 'ath10k-20190201' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware

Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch adds new FW for bnx2x, which adds the following:
 - TX VLAN filtering support.
 - Enable TPA only for packets without VLAN.

It also addresses few critical issues,
 - Fairness algorithm misbehaviour when minimum bandwidth configured
   for all PFs.
 - Error recovery issue on TAPE devices.
 - FW not discarding FIP frames that are not designated to PF.
 - Kernel driver initialization failure after preboot driver.
 - VxLAN stops working after sending inner IP fragmented traffic.
 - Issues in the following FW flows:
    SD VLAN update, TX packet drop, packet padding flow, vlan add/remove.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

From internal git commit:
534e4d6a23b55c75a4b60ebdb323118ee1f4e08d
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

WLAN (PCIe) firmware version: W16.68.1.p195
Bluetooth (USB) firmware version: 16.26.1.p195

In PCIe-USB chipset, WLAN is over PCIe whereas bluetooth is over
USB. The combo image will be downloaded through WLAN only.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>

WLAN (SDIO) firmware version: W15.68.19.17
Bluetooth (SDIO) firmware version: 15.26.19.17
The combo image can be downloaded through either WLAN or
Bluetooth.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>

WLAN (SDIO) firmware version: W16.68.1.p195
Bluetooth (SDIO) firmware version: 16.26.1.p195

Both WLAN and bluetooth are on SDIO interface.
The combo image can be downloaded either through WLAN or
Bluetooth.
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Hemantkumar Suthar <shemant@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

Merge tag 'add-rpi-fw' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware



- Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
- Fix NVRAM config file name for BCM43430 used by Raspberry Pi 3 Model B
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the BCM43455 Wifi/BT moduele as used on the
Raspberry Pi 3 Model B+.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

BCM43430 NVRAM config file for the RPi3 Model B was set to the value
found by brcmf_dmi_probe(), but should use the DT compatible.
Rename the file to actually make it work with the kernel driver.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

From internal git commit:
031c3840bbdbdc1cc9b2b480bb7d8344f72887ed
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

From internal git commit:
031c3840bbdbdc1cc9b2b480bb7d8344f72887ed
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This reverts commit fca59582.

This patch updates the firmware file for Intel Bluetooth 8265
Also it is known as Intel WindStormPeak (WsP).

FW Build: REL0295

Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch updates the firmware file for Intel Bluetooth 8260
also it is known as Intel Snowfield Peak (SfP)

FW Build: REL0522

Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch updates the firmware file for Intel Bluetooth 9260
Also it is known as Intel ThunderPeak (THP).

FW Build: REL0386

Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

This patch updates the firmware file for Intel Bluetooth 9560
Also it is known as Intel JeffersonPeak (JfP).

FW Build: REL0386

Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Merge tag 'add-rpi-fw' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware



- Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
- Add NVRAM for BCM43430 used by Raspberry Pi 3 Model B
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Merge tag 'iwlwifi-fw-2018-12-30' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware



updates for -43.ucode for 9260 and 9000
Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Signed-off-by: Josh Boyer <jwboyer@kernel.org>

Add a NVRAM file for the BCM43430 Wifi/BT module as used on the
Raspberry Pi 3 Module B.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

Add a NVRAM file for the BCM43455 Wifi/BT moduele as used on the
Raspberry Pi 3 Model B+.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

WLAN (USB8801) firmware version: W14.68.36.p138
These devices are WLAN only.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>

Add new versions of the firmwares for 9260 and 9000.

Build number: Core_build_core40-120
Revision numbers: 95eb4e97 (9260, 9000)
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>