GitLab

Version 14.68.29.p26
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>

This patch adds firmware for the BCM43362 for which recently
support has been added to the brcmfmac driver.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Add new firmware for devices: 7260 and 3160
version:
22.24.8.0

New version includes a bunch of bug fixes especially in GO mode.

Also fix the link since the old link is long deprecated.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Arik Nemtsov says:

Here's an updated FW for the Wilink 8 chip. The name change is due to changes
in some driver/FW APIs.

There are new APIs in the latest version of the wl18xx firmware. Add
the new firmware with a new filename (wl18xx-fw-3.bin), which
corresponds to firmware revision 8.8.0.0.13.
Signed-off-by: Arik Nemtsov <arik@wizery.com>

This firmware is for a driver for the Realtek RTL8192EE PCI WIFI device.
It came from a tarball from Realtek named
rtl_92ce_92se_92de_8723ae_88ee_8723be_92ee_linux_mac80211_0017.1224.2013.tar.gz
and is allowed to be distributed under the LICENCE.rtlwifi_firmware.txt license.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Update firmware images for Myri10GE NICs.
Signed-off-by: Hyong-Youb Kim <hykim@myri.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This new firmware fixes several bugs:
 1. HW attention appears and traffic stops when iSCSI firmware tries to
    retransmit iSCSI login command when the iSCSI login is carrying data
    not aligned to 4-bytes.
 2. FCoE traffic fails to run when running in switch-independent multi-function
    mode and there's more than one interface supporting FCoE on a given port.
 3. While two ports are running FCoE with at least one of them has a function
    number (>1) on the same engine in a 4-port device a zeroed CQE is given,
    causing FCoE traffic to stop.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

We should change these permissions unless there is a reason to keep them
executable.
Signed-off-by: Connor Behan <connor.behan@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This firmware is for a driver for the Realtek 8821AE PCI WIFI device.
It came from a tarball from Realtek named
wifi_driver_8821ae_0018.1129.2013.tar.gz and is allowed to be
distributed under the LICENCE.rtlwifi_firmware.txt license.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
[bwh: Fix filename in WHENCE]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Add new ucode files and update the WHENCE entry, also
bump the copyright date on the license.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This firmware is for a driver that will soon be submitted to the kernel.
It occurs as data statements in Realtek driver rtl8723A_WiFi_linux_v4.1.3_6044.20121224.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Emmanuel Grumbach says:

This is another pull request for another firmware. I am sorry not to
have put this together in the same pull request, but I just didn't know
when that new firmware would come out.
It doesn't replace the older one:
* iwlwifi-{7260,3160}-7.ucode is supported starting from 3.10
* iwlwifi-{7260,3160}-8.ucode is supported starting from 3.13

Add new firmware for devices: 7260 and 3160
version:
22.15.8.0

Supported by kernel 3.13 and up.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Add new firmware for devices: 7260 and 3160
version:
22.1.7.0
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

This is the 3.2.3.0 firmware patch for Brocade 3.2.23.0 BFA and BNA drivers.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>

fw and licence were taken from http://ldriver.qlogic.com/firmware/



Cc: Chad Dupuis <chad.dupuis@qlogic.com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: linux-driver@qlogic.com
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Acked-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This patch updates firmware patch files for following Intel Bluetooth devices:
- Intel Wireless Bluetooth 7260
- Intel Wireless Bluetooth 3160

This patch fixes
- sometimes device doesn't response to HCI_reset after multiple reboot
- issue with HCI stress testing
- issue with some multi profile cases
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This firmware file supports rev 2.2 of the CW1100/CW1200 family.
Signed-off-by: Jean Philippe PERRIN <j.p.perrin@st.com>
Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Commit b8e24bfabb03 ('emi62: use request_firmware()') made
emi62/bitstream.HEX a copy of emi26/bitstream.HEX.  Re-do the
conversion from drivers/usb/misc/emi62_fw_{m,s}.h (these headers
contained the same bitstream but different firmware).
Reported-by: Monty <xiphmont@xiph.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

WLAN (SDIO) firmware version: 15.69.2.p11
Bluetooth (SDIO) firmware version: 15.28.2.p11

The combo image can be downloaded through either WLAN or Bluetooth.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>

WLAN (PCIe) firmware version: 15.69.2.p11
Bluetooth (USB) firmware version: 15.28.2.p11

The combo image will be downloaded through WLAN only.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>

The vendor driver RTL8188EUS_linux_v4.1.4_6773.20130222 contains
firmware in the form of data statements. This info has been extracted
into a binary file.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

The vendor driver rtl8188C_8192C_8192D_usb_linux_v3.4.2_3727.20120404
includes new firmware files. These were extracted from data statements
in that driver to form these files.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This patch adds firmware for the BCM4335 802.11ac SDIO chipset.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This firmware is intended for revision 4 and above of the BCM43241
SDIO 802.11n chipset.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This patch adds the firmware for the BCM43241 SDIO chipset, which
is a 2x2 802.11n device.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

The firmware name used in brcmfmac for SDIO devices was named
generically as brcmfmac-sdio.bin. To use the brcmfmac SDIO driver
the user had to copy the appropriate firmware to brcmfmac-sdio.bin.

This turned out to be inconvenient for developers switching different
devices on their system so brcmfmac was changed to use chip specific
filenames according format brcmfmac<chipid>-sdio.bin. This patch renames
the existing SDIO firmware files to match this format.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

This new firmware blob is used with the old wl1251
device whose driver has been in the kernel for quite
some time.

Cc: Luciano Coelho <luca@coelho.fi>
Cc: Pavel Machek <pavel@denx.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>

This patch adds firmware files for Brocade HBA and CNA drivers(BFA and BNA).
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Add new ucode files and update the WHENCE entry.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Add new ucode file and update the WHENCE entry. The
smc ucode is used by the power management controller
on the gpu.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>