GitLab

For unknown option-style arguments (starting with '-'), exit after
printing an error message.

This avoids situations where sunxi-fel would not report incorrect
options (with no FEL device attached/detected) and fail with
"Allwinner USB FEL device not found" instead, which is undesirable.

TODO: Might have to eventually migrate this to some better argument
parsing, e.g. getopt(3) or something similar.
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

fel:
- Minor review of ARM scratch code
- POSIX conformance: Use nanosleep() instead of deprecated usleep()

README:
- revert Unicode dash to standard ASCII
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Make use of FEL library to implement device enumeration and selection by SID

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

"./sunxi-fel --list" enumerates Allwinner USB devices that
are in FEL mode. For each device detected, the SoC name/ID
and - if available - the SID key will be printed to stdout.
The utility then exits with status code 0 (upon success),
or 1 if no devices were found.

The current implementation treats the list feature as an option,
to be able to handle it *before* the first attempt to call
feldev_open() - which could fail (with no FEL devices connected).
However, a "list" alias is available for users who expect this
to be 'command' syntax, so "./sunxi-fel list" works too.
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

open_fel_device() will automatically provide this member field,
based on the SoC ID from FEL/BROM version data. The field will
either receive a human-readable identifier, or the ID in 4-digit
hexadecimal representation (for unknown SoCs).
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

The feldev_handle struct returned by feldev_open() will now contain
this additional data, so the main application no longer needs to care
about retrieving that.

aw_fel_get_version() has thus become a static (= 'private') function.
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

The FEL utility had accumulated enough (mostly USB-related)
"low-level" code to justify moving that to a separate code unit.
This will allow us to keep better focus on the higher level
functionality in fel.c.
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

This moves claiming / releasing the interface into the respective
"open" / "close" functions. The USB code in main() is now trimmed
down to:

feldev_init();
handle = open_fel_device(...);
feldev_done(handle);
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

We move USB endpoint detection into the feldev_claim() routine, so
higher level code is no longer involved with that. Also make use of
the "detached" flag within feldev_handle, instead of relying on an
isolated variable.
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

This enables us to move forward to a cleaner implementation,
where the "core" fel.c code will become independent of direct
libusb usage. After moving USB code to a separate module,
in the end the libusb handle could become an 'opaque' field of
feldev_handle.

The "device" handle might also be extended later, to provide
(FEL) version data and SoC-specific information (chip ID, SRAM
info, human-readable name).
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

See pull requests #59 and #83.

It looks like various BSD derivates have adopted the more common naming
conventions for the endian conversion macros, which means that we would
attempt to redefine them without need (potentially even to 'historic'
names that no longer exist).

Try to avoid this by properly checking for existing functions first.
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

The SID block in the A80 is at 0x01c0e000, with the e-fuses we care
about at offset 0x200 within the block.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

R40 support for fel and uart0-helloworld

The R40 is the same as the A20 for all intents and purposes of
uart0-helloworld.

Add R40's SOC ID.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

The R40 is marketed as the successor to the A20. The SRAM layout is the
same as the A20, but there doesn't seem to be a secure SRAM block.

The SID block is at a completely different address. The layout is the
same as the newer SoCs, with the e-fuses at an offset of 0x200.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

These functions solve the problem that large readl/writel
transfers might be limited by insufficient (scratch) buffer
size. To solve this, chunks of no more than LCODE_MAX_WORDS
get transferred individually.
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

This patch reduces on FEL protocol overhead for the 'multiple'
readl/writel transfers (functions that do word-aligned memory
access on the SoC). The ARM "scratch" code now takes a word count
and is able to work with buffered data, so the host is no longer
required to transfer single words in a piecemeal fashion.
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Besides having fewer lines of code, the #define macros should
also prevent users from accidentally using these names without
braces (i.e. as function pointers). Instead, this will cause
compiler errors now.

soc_info.c: add "A10s" label in comment for SoC ID 0x1625.
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

While at it, modify the former "sram_info" identifiers
to carry a broader "soc_info" meaning.
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Nowadays the term "hacking" has gained increasinly negative
connotations. We don't want people to get a wrong impression
and/or fancy ideas, so remove it.

While at it, also get rid of the emphasis on A10.
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Otherwise we could run into ambiguities with "long long",
and Windows compilation is likely to bail out as it might
not understand "%ll".
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Extend continous integration by adding tests framework

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

This patch adds shell scripts that deliberately go through some
extra program invocations, e.g. erroneous use of fex2bin. The goal
of these test cases is to improve on code (branch) coverage.
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

After all .fex files can be successfully compiled, let's also
test the opposite direction by decompiling the resulting .bin.
The output then has to pass an automated diff against the source
.fex (transformed via some preprocessing with "unify-fex").
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

All tests should go into the new "tests" subdirectory. The idea is
that the separate Makefile in that directory will get invoked via
a top-level "make check".

The tests/Makefile should then take care of running all available
tests, returning an appropriate exit status. Future tests may be
functional, examine code metrics (coverage analysis), or both.

For a start, I'd simply like to check that sunxi-fexc is able to
properly compile all the .fex files from linux-sunxi/sunxi-boards.

(Note: This currently FAILS and will probably require adjustments
to both sunxi-tools and the .fex repository. To work around this,
for now I'm applying patches to fix sunxi-boards.)
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

The previous timeout of 60 seconds was mostly based on scenarios
where large ("write") transfers take place. But it could easily
become annoying if users are awaiting completion of simpler
commands like "read" or "hexdump", and for some reason FEL fails
to respond.

Therefore I've decided to lower the timeout value to 10 seconds,
adjust the maximum chunk size accordingly and - while at it -
improve the source comments documenting their relationship.
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Add initial H5 support in sunxi-fel and uart0-helloworld-sdboot.sunxi

fexc: Fix .bin header treatment, improve .fex parser