GitLab

Generating raw NAND images is particularly useful for boot0 images
creation since the mainline driver is not supporting the funky layout
used by Allwinner's ROM code to load the boot0 binary from NAND.

This tools also allows one to generate raw images for 'normal' partitions
so that they can be flashed before soldering on the NAND on the board
(using a regular NAND programmer).

The tool takes care of generating ECC bytes and randomizing data as
expected by the NAND controller, and re-arranging the ECC/data sections
correctly.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Also add badges for license and build status.
Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>

The meminfo example has been corrected to match the Makefile's
"sunxi-meminfo" target, and an example has been added for the
"sunxi-script_extractor" target.
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Several of the tools here are too generic and/or short for distro packaging
purposes (which like to try and avoid naming clashes in $PATH). Prefix the
following with "sunxi-":
  - fexc
  - bootinfo
  - fel
  - pio
  - meminfo

Do not prefix any of the fel "payloads" or raw binaries since they would not
normally be installed in $PATH.

Do not prefix "phoenix_info", since "phoenix" already seems like an appropriate
prefix for this particular tool.

Update in-tree callers, README and .gitignore accordingly.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: Peter Korsgaard <peter@korsgaard.com>

Fixes https://github.com/linux-sunxi/sunxi-tools/pull/32

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>

It was designed to be used with the legacy u-boot-sunxi
bootloader and has many assumptions, which are specific to
it (a special FEL configuration, hardcoded addresses, etc.)

The mainline U-Boot can now be booted over USB with the
"fel uboot u-boot-sunxi-with-spl.bin" command. And this
makes the old 'usb-boot' script obsolete.

The presence of the 'usb-boot' script in the repository may
confuse the users, so we are removing it now. The users of the
old u-boot-sunxi bootloader still can always get this script
from one of the old sunxi-tools tags.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>

* rename a10-meminfo to meminfo
* add static build to Makefile
* fix operand warning
* built binary verified on proper linux and android
Signed-off-by: Luc Verhaegen <libv@skynet.be>