GitLab

When probing for the copyarea ioctl, we want to be sure that the
kernel just does not return 0 (success) for any unsupported ioctls.
The rockchip vendor kernels have been reported to have this issue.

In the case if the support for the Raspberry Pi specific copyarea
ioctl was detected by mistake, moving windows or scrolling was
broken.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Try to load the 'sunxi_cedar_mod' kernel module. And if it loads
successfully, then report the DRI2 VDPAU name as 'sunxi'. This allows to
use libvdpau-sunxi without setting the VDPAU_DRIVER environment variable.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Fixes https://github.com/ssvb/xf86-video-fbturbo/issues/30

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

It makes sense to make a formal release. Providing the
pre-generated 'configure' script should make it less
likely for people to mess with autotools and encounter
troubles:

    https://github.com/ssvb/xf86-video-fbturbo/issues/28
    https://github.com/ssvb/xf86-video-fbturbo/issues/25

Also it's likely that this particular xf86-video-fbturbo
git master snapshot was used in:

    http://www.raspberrypi.org/archives/5580

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

After window creation or resize, the mali blob on the client side
requests two dri2 buffers (for back and front) from the ddx. The
problem is that the 'swap' and 'get_buffer' operations are executed
out of order relative to each other and we may have different
possible patterns of dri2 communication:

1. swap swap swap swap get_buffer swap get_buffer swap swap ...
2. swap swap swap get_buffer swap swap get_buffer swap swap ...

A major annoyance is that both mali blob on the client side and
the ddx driver in xserver need have the same idea about which one
of there two buffers goes to front and which goes to back. Older
commit https://github.com/ssvb/xf86-video-fbturbo/commit/30b4ca27d1c4


tried to address this problem in a mostly empirical way and managed
to solve it at least for the synthetic test gles-rgb-cycle-demo and
for most of the real programs (such as Qt5 applications, etc.)

However appears that this heuristics is not 100% reliable in all
cases. The Extreme Tux Racer game run in glshim manages to trigger
the back and front buffers mismatch. Which manifests itself as
erratic penguin movement.

This patch adds a special check, which now randomly samples certain
bytes from the dri2 buffers to see which one of them has been
modified by the client application between buffer swaps. If we see
that the rendering actually happens to the front buffer instead of
the back buffer, then we just change the roles of these buffers.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

When using exynos_drm, /dev/dri/card0 is now the exynos-drm node, and
/dev/dri/card1 is mali.

Instead of hardcoding mali at card0, use libdrm to automatically
provide the correct device node path.
Signed-off-by: Daniel Drake <drake@endlessm.com>

Fixes linking related fragility, which could result in crashes
when doing Thumb2->ARM function calls.
Reported-by: Luc Verhaegen <libv@skynet.be>
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

This avoids a kernel oops due to the badly implemented and badly
checked ump interface.
Signed-off-by: Luc Verhaegen <libv@skynet.be>

And disable building ump when it is not there.
Signed-off-by: Luc Verhaegen <libv@skynet.be>

The binary driver is unaffected by it, only when mesa-dri is fully
installed does it do something.
Signed-off-by: Luc Verhaegen <libv@skynet.be>

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Marvell PJ4 core used in CuBox very poorly handles VFP uncached
reads from the framebuffer. Using WMMX or ARM LDM reads is much
faster, with LDM instructions having a minor advantage. This
improves framebuffer read performance from ~50MB/s to ~100MB/s.

WMMX runtime detection and PJ4 core identification is also added
as part of this fix.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Benchmarking with x11perf, modified to support wider range of sizes
for the scroll operation. Tests have been run at the stock 700MHz CPU
clock frequency and with 1280x720 32bpp desktop.

$ DISPLAY=:0 ./x11perf -scroll5 -scroll10 -scroll15 -scroll20 \
                       -scroll30 -scroll50 -scroll100

== CPU ==

1000000 trep @   0.0289 msec ( 34600.0/sec): Scroll 5x5 pixels
1000000 trep @   0.0387 msec ( 25800.0/sec): Scroll 10x10 pixels
1000000 trep @   0.0459 msec ( 21800.0/sec): Scroll 15x15 pixels
 450000 trep @   0.0576 msec ( 17300.0/sec): Scroll 20x20 pixels
 350000 trep @   0.0817 msec ( 12200.0/sec): Scroll 30x30 pixels
 200000 trep @   0.1564 msec (  6390.0/sec): Scroll 50x50 pixels
 100000 trep @   0.4446 msec (  2250.0/sec): Scroll 100x100 pixels

== fb_copyarea (DMA) acceleration ==

1000000 trep @   0.0307 msec ( 32500.0/sec): Scroll 5x5 pixels
1000000 trep @   0.0353 msec ( 28300.0/sec): Scroll 10x10 pixels
1000000 trep @   0.0397 msec ( 25200.0/sec): Scroll 15x15 pixels
1000000 trep @   0.0464 msec ( 21600.0/sec): Scroll 20x20 pixels
 400000 trep @   0.0645 msec ( 15500.0/sec): Scroll 30x30 pixels
 250000 trep @   0.1177 msec (  8500.0/sec): Scroll 50x50 pixels
 100000 trep @   0.2783 msec (  3590.0/sec): Scroll 100x100 pixels

This shows that the ioctls overhead and the DMA setup cost is not so
significant for the Raspberry Pi. DMA already becomes a bit faster
than CPU at 10x10 size of the blit operation.

Even though there is no significant difference between CPU and DMA
for extremely small sizes of operations (the other overhead is clearly
dominating), setting a threshold is not going to harm:

== mixed CPU / fb_copyarea (DMA) with 90 pixels threshold ==

1000000 trep @   0.0291 msec ( 34300.0/sec): Scroll 5x5 pixels
1000000 trep @   0.0345 msec ( 29000.0/sec): Scroll 10x10 pixels
1000000 trep @   0.0395 msec ( 25300.0/sec): Scroll 15x15 pixels
1000000 trep @   0.0466 msec ( 21400.0/sec): Scroll 20x20 pixels
 400000 trep @   0.0650 msec ( 15400.0/sec): Scroll 30x30 pixels
 250000 trep @   0.1181 msec (  8470.0/sec): Scroll 50x50 pixels
 100000 trep @   0.2784 msec (  3590.0/sec): Scroll 100x100 pixels

If some other ARM devices also implement Raspberry Pi compatible
accelerated fb_copyarea ioctl, then the threshold selection may
be reconsidered.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Now acceleration is only used in the case if the AccelMethod option
is not set (so that it is assumed to be a default choice) or when
it is explicitly set to "COPYAREA". Any other value (for example
"CPU") disables acceleration.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

This provides basic 2D acceleration support for Raspberry Pi
to speed up moving windows and scrolling.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Because a wide range of embedded ARM devices are actually supported
(Allwinner A1X/A20, Raspberry Pi, ODROID-X, Rockchip, ...) and
are getting some sort of performance improvement and/or hardware
acceleration, the DDX driver needs a vendor neutral name.

Resolves https://github.com/ssvb/xf86-video-fbturbo/issues/10

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

In the case if the framebuffer reservation size is too small for
efficient use of the hardware overlays and zero-copy buffers flipping,
log a hint about fixing this problem in /var/log/Xorg.0.log
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Even though we are primarily using the UMP buffer obtained by the
GET_UMP_SECURE_ID_SUNXI_FB ioctl, another UMP buffer obtained by
the GET_UMP_SECURE_ID_BUF1 ioctl should also span over the whole
framebuffer. Otherwise we may have troubles with the window resize
bug recovery and buffer flipping.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

The instructions, links, etc.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

The Allwinner A10/A13 display controller hardware is expected to
support negative coordinates of the top left corners of the layers.
But there is some bug either in the kernel driver or in the hardware,
which messes up the picture on screen when the Y coordinate is negative
for YUV layer. Negative X coordinates are not affected. RGB formats
are not affected too (no matter whether the RGB layer is scaled or not).

We fix this by just recalculating which part of the buffer in memory
corresponds to Y=0 on screen and adjust the input buffer settings.

Fixes https://github.com/ssvb/xf86-video-sunxifb/issues/16

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Now zero copy and tear free buffer swapping is also supported
for 16bpp desktop.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Now the scaler is enabled for the sunxi disp layer only when we want
to use it for YUV format with XV. Whenever the layer is configured
for RGB format or deactivated, the scaler gets disabled.

This should make the driver more friendly to the other potential
scaled layer users. The total number of available scalers is only
2 for Allwinner A10 and only 1 for Allwinner A13.

The potential drawback is that now we may get an error when trying
to enable the scaler (if somebody else has used up all the available
scalers) instead of always having it reserved and ready for use.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Recent changes broke the configuration when "DRI2HWOverlay" option
is set to "false". This patch adds the missing UMP secure ids
initialization and resolves the problem.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Do this to keep the variables naming style consistent across the
source file (earlier these variables had different names like
'self', 'drvpriv', 'private').
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

In double buffer mode, explicitly mark the buffers as designated
for odd or even frame position when putting them into queue. And
when swapping the buffers, use these flags to re-synchronize if
it is necessary. This prevents problems after window resize (when
gles-rgb-cycle-demo could expose a mismatch between the color
name in the window title and the actual window color).
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Whenever something goes wrong in high fps mode, it may be interesting
to slow down the demo to check whether the actual background color
matches the expected color (shown in the window title).
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

If DEBUG_WITH_RGB_PATTERN is defined, then we check that the
frames colors are changed as "R -> G -> B -> R -> G -> ..."
pattern and print debugging messages when this is not the
case. Such color change pattern can be generated by the
"test/gles-rgb-cycle-demo.c" program.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Do this mostly for security reasons. We don't want any application
to see whatever was last rendered by the previous GLES application
by just peeking into a freshly allocated DRI2 buffer.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

We manage only a single hardware overlay. That's a precious shared
resource, which we want to use for zero-copy fullscreen compositing
in gnome-shell. The strange 1x1 window does not really need it.
Fixes https://github.com/ssvb/xf86-video-sunxifb/issues/2

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

When enabled, it tries to avoid tearing in OpenGL ES applications.
Works on sunxi hardware in the case if the hardware overlay (sunxi
disp layer) is used for a DRI2 window. The name of this option and
the description in the man page has been borrowed from intel and
radeon drivers.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

That's the right thing to do and fixes issues such as
    https://github.com/ssvb/xf86-video-sunxifb/issues/6



As a result, now the framebuffer size may need to be larger in
order to accomodate two DRI2 buffers in the offscreen part of
the framebuffer. The users of sunxi hardware are advised to
increase the value of fb0_framebuffer_num variable in fex file
to 3 for 32bpp mode and to 5 for 16bpp mode.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Should fix https://github.com/ssvb/xf86-video-sunxifb/issues/14


and prevent FTBFS on some systems.
Reported-by: Fred Chien <cfsghost@gmail.com>
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

When moving further to our own DRI2 buffers bookkeeping, we can't
really trust the information from DRI2BufferRec anymore. So just add
a copy of all the missing bits of information to UMPBufferInfoRec
and use it instead.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

By allowing to set the delay between frames with milliseconds
precision in the command line, we can use it to test vsync.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

The recent commit 9e0a8731

 (its part
that suppressed buffers reuse in the Xorg DRI2 framework) introduced
a regression. Half of the frames stoppped reaching the screen on
the CPU copy fallback path because the Mali blob now ended up
rendering them to the "wrong" buffer.

It just confirms that we need to completely move from the standard
DRI2 framework in the Xorg server to our own buffers bookkeeping
logic. This patch fixes the regression by introducing a single UMP
buffer per window, which is shared between back and front DRI2
buffers. We can do this because double buffering does not make much
sense on the fallback path at the moment (we can't set scanout from
this buffer and anyway have to copy this data elsewhere immediately
after we get it from Mali).
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Bail out earlier for the uninteresting types of DRI2 buffer
requests (by just returning a dummy null UMP buffer). Makes
the code a bit more simple on the common path.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

The test program cycles through 3 colors (red, green, blue), so
it is easier to see if we get the color change pattern wrong.
Also the X11 window title is updated to indicate the current
color information. If we have any problems with window
decorations handling, they are likely to be exposed.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>