GitLab

When enabled, it tries to avoid tearing in OpenGL ES applications.
Works on sunxi hardware in the case if the hardware overlay (sunxi
disp layer) is used for a DRI2 window. The name of this option and
the description in the man page has been borrowed from intel and
radeon drivers.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Add the "XVHWOverlay" boolean xorg.conf option to make it possible
to disable the XV acceleration feature using display layers on
sunxi hardware.
Signed-off-by: Harm Hanemaaijer <fgenfb@yahoo.com>

Proper layer sharing between XV and DRI2 still needs to be implemented.
Additionally we still need NEON and/or G2D "textured overlay" as a
fallback solution for the composited desktop (NEON optimized XV is going
to be useful for a wide range of ARM devices). A bit of performance
tuning is also necessary.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

This should be useful for Raspberry Pi. When reading uncached source buffers,
the VFP optimized overlapped two-pass blit is roughly 2-3 times slower than
memcpy in cached memory. Which makes it reasonably competitive compared to
ShadowFB (considering that ShadowFB allocates an extra buffer, does extra
memory copies which take time and thrash L2 cache, etc.). It even provides
a slight performance advantage in a more or less realistic use case
(scrolling in xterm), which needs reads from the framebuffer:

==== Before (xf86-video-fbdev with ShadowFB) ====

$ time DISPLAY=:0 xterm +j -maximized -e cat longtext.txt

real    1m50.245s
user    0m1.750s
sys     0m0.800s

==== After (xf86-video-sunxifb without ShadowFB) ====

$ time DISPLAY=:0 xterm +j -maximized -e cat longtext.txt

real    1m27.709s
user    0m1.690s
sys     0m0.920s

We get decent results even when reading from the framebuffer. However
in many typical workloads (excluding scrolling and dragging windows)
the framebuffer is primarily used as write-only. In write-only use
cases ShadowFB is just pure overhead. So getting rid of it is a
very good idea as this improves overall graphics performance.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

A small typo in a function argument and C compiler happily accepting
void pointers instead of something else is a dangerous combo. Need to
be more careful.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

This patch implements a heuristics, which enables backing store for some
windows. When backing store is enabled for a window, the window gets a
backing pixmap (via automatic redirection provided by composite extension).
It acts a bit similar to ShadowFB, but for individual windows.

The advantage of backing store is that we can avoid "expose event -> redraw"
animated trail in the exposed area when dragging another window on top of it.
Dragging windows becomes much smoother and faster.

But the disadvantage of backing store is the same as for ShadowFB. That's a
loss of precious RAM, extra buffer copy when somebody tries to update window
content, potentially skip of some frames on fast animation (they just do
not reach screen). Also hardware accelerated scrolling does not currently
work for the windows with backing store enabled.

We try to make the best use of backing store by enabling backing store for
all the windows that are direct children of root, except the one which has
keyboard focus (either directly or via one of its children). In practice this
heuristics seems to provide nearly perfect results:
 1) dragging windows is fast and smooth.
 2) the top level window with the keyboard focus (typically the application
    that a user is working with) is G2D accelerated and does not suffer from
    any intermediate buffer copy overhead.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

With the fallback to CPU backend for unsupported blits and also
threshold for avoiding small blits, now G2D should always provide
best overall performance.

The users of recent versions of xf86-video-sunxifb are supposed
to also have a reasonably recent version of linux-sunxi kernel.
Which includes the following fix:
  https://github.com/linux-sunxi/linux-sunxi/commit/3d49345343a1535b



The users of old kernels are going to see screen corruption on
dragging windows and scrolling. They just should upgrade :)
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

The G2D driver only supports framebuffer->framebuffer blits and
also can't be used to accelerate dragging windows to the right
(without hacking the kernel driver to do two-pass blit there).
This patch adds fallback to NEON optimized CPU backend instead
of resorting to use poorly performing fbBlt in these cases.

Note: we assume that ioctls normally do not fail (even if they
      do, the slow old style fallback to fbBlt is not the worst
      thing to worry about).
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Should be useful for better performance when moving windows
and scrolling on the devices without a dedicated 2D hardware
accelerator (Allwinner A13).
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

The sunxi_x_g2d.c file contains the midlayer code for hooking the
G2D optimized blit into xserver. But in fact it does not strictly
need to depend on anything sunxi specific.

So now we introduce a simple "blt2d_i" interface struct which
specifically provides a pointer to the accelerated blit function.
And just use this interface struct instead of the whole "sunxi_disp_t".
This allows to easily reuse the same code for other non-G2D or even
non-sunxi blit implementations in the future.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

It might be not statically compiled into kernel (for example in Fedora),
so we should try to explictly load it.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Reported-by: Maurice de la Ferté <kadava@gmx.de>
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Explain that AIGLX is normally expected to fail and the users should
not really worry about it. Also provide a warning in the case if the
driver has been compiled without libUMP support (it could be that
the user actually wanted 3D acceleration, but just has not installed
all the needed dependencies).
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

This initial G2D support code can speed up moving windows in XFCE. Currently
disabled by default, but can be enabled by editing /etc/X11/xorg.conf and
adding the following line to the "Device" section:

        Option          "AccelMethod" "G2D"
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Avoid creating a new mapping because that's a waste of the virtual address
space. Also we are going to use this xserver framebuffer mapping address
for testing whether window backing pixmaps are allocated in the framebuffer
and can be accelerated by G2D.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

The driver can use sunxi display controller layers for fully visible
windows, avoiding expensive memory copy.

Hardware cursor is necessary because it is also visible on
top of sunxi disp layers, while software cursor is not.

FIXME: there is one minor problem with negative cursor
positions. The hardware does not support them, so such
positions are just set to 0 for now. In the future this
can be solved better by changing the cursor picture and
showing only the parts which are visible on screen.

Note: the header file "sunxi_disp_ioctl.h" is GPL licensed. So until
it is gets a MIT/X11 replacement, the DDX driver is GPL licensed as
a whole. The individual source files still have their own license.
Also in order to avoid any possible confusion, the MIT/X11 license
header from COPYING has been added to "fbdev.c" and "fbdev_priv.h".

It is going to be included by multiple different source files.

As there is no way for the hardware specific bits to be accepted
in xf86-video-fbdev, we need a new driver with its own name.

Signed-off-by: Adam Jackson <ajax@redhat.com>

Signed-off-by: Dave Airlie <airlied@redhat.com>

Generated using util/modular/x-driver-screen-scrn-conv.sh
Signed-off-by: Dave Airlie <airlied@redhat.com>

fbdev seems to be the only video driver without MOD_CLASS_VIDEODRV
Signed-off-by: Paulo Zanoni <pzanoni@mandriva.com>
Reviewed-by: Jesse Adkins <jesserayadkins@gmail.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>

Use XV from server's xorg-server.h to determine whether to perform XV
initialization.
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Julien Cristau <jcristau@debian.org>

Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Julien Cristau <jcristau@debian.org>

Signed-off-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Julien Cristau <jcristau@debian.org>

Fixes crash in CloseScreen().
Signed-off-by: Julien Cristau <jcristau@debian.org>
Tested-by: Cyril Brulebois <kibi@debian.org>

Signed-off-by: Adam Jackson <ajax@redhat.com>

To build VESA driver for use with pci-rework Xserver, add --enable-pciacces
to the configure command line.  Otherwise, the "traditional" VESA driver will
be built.

We were determining it from the mode which is current at X server startup,
which may have a completely different pitch.