GitLab

Fixes linking related fragility, which could result in crashes
when doing Thumb2->ARM function calls.
Reported-by: Luc Verhaegen <libv@skynet.be>
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Marvell PJ4 core used in CuBox very poorly handles VFP uncached
reads from the framebuffer. Using WMMX or ARM LDM reads is much
faster, with LDM instructions having a minor advantage. This
improves framebuffer read performance from ~50MB/s to ~100MB/s.

WMMX runtime detection and PJ4 core identification is also added
as part of this fix.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Using VFP, we can load up to 128 bytes with a single VLDM instruction.
But before this patch, only NEON implementation was available. Just
because it showed better results on Allwinner A10 compared to VFP.
And this DDX driver used to primarily target just sunxi hardware.

But looks like it makes sense to also target other devices (at least
ODROID-X, which has the same Mali400 GPU and can use the same DRI2
integration for EGL and GLESv2 support). And on the other ARM devices,
VFP aligned reads generally work better than NEON. The benchmark
results are listed below:

            1280x720, 32bpp, testing "x11perf -scroll500"

== Exynos 5250, Cortex-A15, Non-cacheable streaming enhancement disabled ==

NEON : 10000 trep @   3.7101 msec (   270.0/sec): Scroll 500x500 pixels
VFP  : 10000 trep @   2.6678 msec (   375.0/sec): Scroll 500x500 pixels

== Exynos 5250, Cortex-A15, Non-cacheable streaming enhancement enabled ==

NEON : 15000 trep @   2.2568 msec (   443.0/sec): Scroll 500x500 pixels
VFP  : 15000 trep @   2.3016 msec (   434.0/sec): Scroll 500x500 pixels

== Exynos 4412, Cortex-A9 ==

NEON : 10000 trep @   4.5125 msec (   222.0/sec): Scroll 500x500 pixels
VFP  : 10000 trep @   2.7015 msec (   370.0/sec): Scroll 500x500 pixels

== TI DM3730, Cortex-A8 ==

NEON : 15000 trep @   2.2303 msec (   448.0/sec): Scroll 500x500 pixels
VFP  : 10000 trep @   3.0670 msec (   326.0/sec): Scroll 500x500 pixels

== Allwinner A10, Cortex-A8 ==

NEON : 10000 trep @   2.5559 msec (   391.0/sec): Scroll 500x500 pixels
VFP  : 10000 trep @   3.0580 msec (   327.0/sec): Scroll 500x500 pixels

== Raspberry Pi, BCM2708, ARM1176 ==

VFP  :  3000 trep @   8.7699 msec (   114.0/sec): Scroll 500x500 pixels

The benchmark numbers in this particular test setup roughly represent
memory copy bandwidth measured in MB/s (when doing overlapped blits
inside of a writecombine mapped framebuffer).

-----------------------------------------------------------------------

Note: the use of VFP two-pass overlapped copy instead of ShadowFB is
      still not enabled by default when running on Raspberry Pi
      because the performance results are not so great.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

This is my old ARM9E/ARM11 memcpy code from
    https://garage.maemo.org/projects/mplayer/


with some tuning for Raspberry Pi (aligned prefetch added).

Will be used by VFP optimized overlapped blt function.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>

Should be useful for better performance when moving windows
and scrolling on the devices without a dedicated 2D hardware
accelerator (Allwinner A13).
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>