Rationalize UART usage among different BL stages

This patch changes the UART port assignment for various BL stages
so as to make it consistent on the platform ports. The BL1, BL2 and
BL3-1 now uses UART0 on the FVP port and SoC UART0 on the Juno port.
The BL3-2 uses UART2 on the FVP port and FPGA UART0 on the Juno
port.

This provides an interim fix to ARM-software/tf-issues#220 until
support is added for changing the UART port for a BL image between
cold boot and runtime.

Change-Id: Iae5faea90be3d59e41e597b34a902f93e737505a

plat/fvp/tsp/tsp_fvp_setup.c

@@ -72,7 +72,7 @@ void tsp_early_platform_setup(void)
 	 * Initialize a different console than already in use to display
 	 * messages from TSP
 	 */
-	console_init(PL011_UART1_BASE, PL011_UART1_CLK_IN_HZ, PL011_BAUDRATE);
+	console_init(PL011_UART2_BASE, PL011_UART2_CLK_IN_HZ, PL011_BAUDRATE);
 
 	/* Initialize the platform config for future decision making */
 	fvp_config_setup();

plat/juno/bl1_plat_setup.c

@@ -75,7 +75,7 @@ void bl1_early_platform_setup(void)
 	const size_t bl1_size = BL1_RAM_LIMIT - BL1_RAM_BASE;
 
 	/* Initialize the console to provide early debug support */
-	console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
+	console_init(PL011_UART2_BASE, PL011_UART2_CLK_IN_HZ, PL011_BAUDRATE);
 
 	/*
 	 * Enable CCI-400 for this cluster. No need for locks as no other cpu is

plat/juno/bl2_plat_setup.c

@@ -158,7 +158,7 @@ struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
 void bl2_early_platform_setup(meminfo_t *mem_layout)
 {
 	/* Initialize the console to provide early debug support */
-	console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
+	console_init(PL011_UART2_BASE, PL011_UART2_CLK_IN_HZ, PL011_BAUDRATE);
 
 	/* Setup the BL2 memory layout */
 	bl2_tzram_layout = *mem_layout;

plat/juno/bl31_plat_setup.c

@@ -108,7 +108,7 @@ void bl31_early_platform_setup(bl31_params_t *from_bl2,
 			       void *plat_params_from_bl2)
 {
 	/* Initialize the console to provide early debug support */
-	console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
+	console_init(PL011_UART2_BASE, PL011_UART2_CLK_IN_HZ, PL011_BAUDRATE);
 
 	/*
 	 * Initialise the CCI-400 driver for BL31 so that it is accessible after

plat/juno/juno_def.h

@@ -138,6 +138,8 @@
 
 #define PL011_UART0_CLK_IN_HZ		24000000
 #define PL011_UART1_CLK_IN_HZ		24000000
+#define PL011_UART2_CLK_IN_HZ		7273800
+#define PL011_UART3_CLK_IN_HZ		7273800
 
 /*******************************************************************************
  * NIC-400 related constants

plat/juno/tsp/tsp_plat_setup.c

@@ -72,7 +72,7 @@ void tsp_early_platform_setup(void)
 	 * Initialize a different console than already in use to display
 	 * messages from TSP
 	 */
-	console_init(PL011_UART1_BASE, PL011_UART1_CLK_IN_HZ, PL011_BAUDRATE);
+	console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
 }
 
 /*******************************************************************************