Commit ad64ab28 authored by danh-arm's avatar danh-arm Committed by GitHub
Browse files

Merge pull request #772 from davidcunado-arm/dc/reset_debug_reg

Reset EL2 and EL3 configurable controls
parents 535f185a 939f66d6
......@@ -67,14 +67,6 @@
orr r0, r0, #SCR_SIF_BIT
stcopr r0, SCR
/* -----------------------------------------------------------------
* Reset those registers that may have architecturally unknown reset
* values
* -----------------------------------------------------------------
*/
mov r0, #0
stcopr r0, SDCR
/* -----------------------------------------------------
* Enable the Asynchronous data abort now that the
* exception vectors have been setup.
......
......@@ -382,8 +382,8 @@
/* Debug register defines. The format is: coproc, opt1, CRn, CRm, opt2 */
#define HDCR p15, 4, c1, c1, 1
#define SDCR p15, 0, c1, c3, 1
#define PMCR p15, 0, c9, c12, 0
#define CNTHP_CTL p15, 4, c14, c2, 1
/* GICv3 CPU Interface system register defines. The format is: coproc, opt1, CRn, CRm, opt2 */
#define ICC_IAR1 p15, 0, c12, c12, 0
......
......@@ -250,6 +250,7 @@ DEFINE_COPROCR_RW_FUNCS(icc_eoir0_el1, ICC_EOIR0)
DEFINE_COPROCR_RW_FUNCS(icc_eoir1_el1, ICC_EOIR1)
DEFINE_COPROCR_RW_FUNCS(hdcr, HDCR)
DEFINE_COPROCR_RW_FUNCS(cnthp_ctl, CNTHP_CTL)
DEFINE_COPROCR_READ_FUNC(pmcr, PMCR)
/*
......
......@@ -280,6 +280,8 @@ DEFINE_SYSREG_READ_FUNC(isr_el1)
DEFINE_SYSREG_READ_FUNC(ctr_el0)
DEFINE_SYSREG_RW_FUNCS(mdcr_el2)
DEFINE_SYSREG_RW_FUNCS(hstr_el2)
DEFINE_SYSREG_RW_FUNCS(cnthp_ctl_el2)
DEFINE_SYSREG_READ_FUNC(pmcr_el0)
DEFINE_RENAME_SYSREG_RW_FUNCS(icc_sre_el1, ICC_SRE_EL1)
......
......@@ -243,6 +243,12 @@ void cm_prepare_el3_exit(uint32_t security_state)
* (5 bits) and HPMN is at offset zero within HDCR.
*/
write_hdcr((read_pmcr() & PMCR_N_BITS) >> PMCR_N_SHIFT);
/*
* Reset CNTHP_CTL to disable the EL2 physical timer and
* therefore prevent timer interrupts.
*/
write_cnthp_ctl(0);
isb();
write_scr(read_scr() & ~SCR_NS_BIT);
......
......@@ -269,6 +269,18 @@ void cm_prepare_el3_exit(uint32_t security_state)
*/
write_mdcr_el2((read_pmcr_el0() & PMCR_EL0_N_BITS)
>> PMCR_EL0_N_SHIFT);
/*
* Avoid unexpected traps of non-secure access to
* certain system registers at EL1 or lower where
* HSTR_EL2 is not completely reset to zero by the
* hardware - zero the entire register.
*/
write_hstr_el2(0);
/*
* Reset CNTHP_CTL_EL2 to disable the EL2 physical timer
* and therefore prevent timer interrupts.
*/
write_cnthp_ctl_el2(0);
}
}
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment